modelNormSetpointRoomTemperature
Extends from Modelica.Blocks.Sources.Constant (Generate constant signal of type Real).
Information
1. Purpose of model
Gives norm setpoint of room temperature depending on usage of the room according to EN 12831
2. Level of detail, physical effects considered, and physical insight
(no remarks)
3. Limits of validity
(no remarks)
4. Interfaces
y: real output (connector for setpoint of room temperature)
5. Nomenclature
(no remarks)
6. Governing Equations
(no remarks)
7. Remarks for Usage
(no remarks)
8. Validation
(no remarks)
9. References
DIN EN 12831-1:2017-09 Energy performance of buildings - Method for calculation of the design heat load - Part 1: Space heating load, Module M3-3; German version EN 12831-1:2017
10. Version History
Model created by Pascal Dubucq (dubucq@tuhh.de) on 01.10.2014
Quality check (Code conventions) by Rebekka Denninger on 01.10.2016
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Real | k (from Constant) | Constant output value | |
| Base.RoomType_EN12831 | roomType | Base.RoomType_EN12831.appartment | |
| SI.Temperature | T | getTemperature(roomType) |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| RealOutput | y (from SO) | Connector of Real output signal |
Contents
| Name | Description |
|---|---|
| getTemperature |