modelCoolingUnit2ports
Simple cooling unit model with two ports for fridge and freezer heat flow
Extends from TransiEnt.Basics.Icons.Model (Icon for models).
Information
1. Purpose of model
Simple cooling unit model with two ports for fridge and freezer heat flow. Full documentation is not available yet. Please see comments in code or contact author per mail.
2. Level of detail, physical effects considered, and physical insight
(no remarks)
3. Limits of validity
(no remarks)
4. Interfaces
port_a - Heat Port 1
port_b - Heat Port 2
q - boolean (on/off) signal
epp - Electric Power Port
5. Nomenclature
(no remarks)
6. Governing Equations
(no remarks)
7. Remarks for Usage
(no remarks)
8. Validation
(no remarks)
9. References
(no remarks)
10. Version History
Model created by Pascal Dubucq (dubucq@tuhh.de) on 01.10.2014
Quality check (Code conventions) by Rebekka Denninger on 01.10.2016
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| SI.Power | P_el_n | 80 | Nominal electric power |
| Real | COP | 2 | Expected value of coefficient of performance |
| Real | x_fridge | 0.3862 | Fraction of total cooling power needed for fridge |
| Real | x_freezer | 1 - x_fridge | Fraction of total cooling power needed for freezer |