modelStatCycFlowReversal
Extends from TransiEnt.Basics.Icons.ModelStaticCycle.
Information
1. Purpose of model
Tester for static cycle.
2. Level of detail, physical effects considered, and physical insight
(Purely technical component without physical modeling.)
3. Limits of validity
(Purely technical component without physical modeling.)
4. Interfaces
(no remarks)
5. Nomenclature
(no elements)
6. Governing Equations
(no equations)
7. Remarks for Usage
(no remarks)
8. Validation
(no validation or testing necessary)
9. References
(no remarks)
10. Version History
Created by Tom Lindemann (tom.lindemann@tuhh.de), Mar 2016
Edited by Lisa Andresen (andresen@tuhh.de), Jun 2016
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| TILMedia.VLEFluidTypes.BaseVLEFluid | medium | simCenter.gasModel1 | |General|Medium to be used |
| SI.Pressure | p_source | simCenter.p_eff_2 + simCenter.p_amb_const | |Sources|Absolute Pressure in source |
| SI.Temperature | T_source | simCenter.T_ground | |Sources|Temperature in source |
| SI.MassFraction[medium.nc - 1] | xi_source | medium.xi_default | |Sources|Mass specific composition |
| SI.MassFlowRate | m_flow_sink | 141 | |Sinks|Mass flow in sink |
| SI.PressureDifference | Delta_p_nom_pipe | 0.8e5 | |Pipes|Nominal pressure drop in pipe |
| SI.MassFlowRate | m_flow_nom_pipe | 141 | |Pipes|Nominal mass flow rate in pipe |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| TransiEnt.SimCenter | simCenter | ||
| TransiEnt.Grid.Gas.StaticCycles.Source_yellow_T | source | ||
| TransiEnt.Grid.Gas.StaticCycles.Pipe_yellow | pipe | ||
| TransiEnt.SimCenter | simCenter1 | ||
| TransiEnt.Grid.Gas.StaticCycles.Sink_yellow | sink |