modelTestADM1

Information

1. Purpose of model

Check model for testing the adm1 model. The model is tetsted with the parameters within the bsm2 framework and the parameters of Bulkowska. It can be seen that the steady state output values of the adm1 model have a

high accordance with the output values from Rosén, C., & Jeppsson, U. (2006). "Aspects on ADM1 Implementation within the BSM2 Framework" if the same input parameters are used. Moreover several output variables of the simulation result like the pH-value, the gas volume flow and different soluble

components have been compared with Bułkowska, K., et al. (2015). ADM1-based modeling of anaerobic codigestion of maize silage and cattle manure–calibration of parameters and model verification (part II).

2. Level of detail, physical effects considered, and physical insight

(Description)

3. Limits of validity

(Description)

4. Interfaces

(none)

5. Nomenclature

(no elements)

6. Governing Equations

(no equations)

7. Remarks for Usage

(none)

8. Validation

(none)

9. References

[1] Philip Jahneke,"Modellierung einer Biogasanalge und Untersuchung der energetischen Kopplung mit einer Power-to-Gas Anlage in Modelica",master thesis, Hamburg 2018

[2] Bułkowska, K., et al. (2015). ADM1-based modeling of anaerobic codigestion of maize silage and cattle manure–calibration of parameters and model verification (part II)

[3] Rosén, C., & Jeppsson, U. (2006). Aspects on ADM1 Implementation within the BSM2 Framework

10. Version History

Model created by Jan Westphal (j.westphal@tuhh.de) in jan 2020

Parameters

Components