modelGetInputsElectrolyzerL2
Get enabled inputs and parameters of disabled inputs
Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).
Information
1. Purpose of model
This model is a simple block to collect inputs like ClaRa.Components.TurboMachines.Compressors.Fundamentals but for an electrolyzer.
2. Level of detail, physical effects considered, and physical insight
(no remarks)
3. Limits of validity
(no remarks)
4. Interfaces
P_el_set: input for set electric power
m_flow_H2_set: input for set hydrogen mass flow
T_input: input for temperature profile
i_dens_set: input for current density profile
i_stack_set: input for current profile
5. Nomenclature
(no elements)
6. Governing Equations
(no remarks)
7. Remarks for Usage
(no remarks)
8. Validation
(no remarks)
9. References
(no remarks)
10. Version History
Model created by John Webster (jcwebste@edu.uwaterloo.ca) in October 2018
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealInput | i_dens_set | Prescribed current density profile | |
| Modelica.Blocks.Interfaces.RealInput | T_input | Prescribed temp profile | |
| Modelica.Blocks.Interfaces.RealInput | m_flow_H2_set | Prescribed hydrogen mass flow rate profile | |
| Modelica.Blocks.Interfaces.RealInput | P_el_set | Prescribed electric power profile | |
| Modelica.Blocks.Interfaces.RealInput | i_el_stack_set | Prescribed current profile |