.TransiEnt.Producer.Gas.Electrolyzer.Base.Physics.Voltage.ConductivityModels.PEMconductivity3

Information

1. Purpose of model

PEM Conductivity as per Abdin 2015

2. Level of detail, physical effects considered, and physical insight

PEM Conductivity as modeled by Abdin et al, 2015. (Originally from Springer et al. 1991, conversion factor (*100) found from there)

3. Limits of validity

Original model developed and validated in the range of 20-60 °C with operating pressure of 15-35 bar.

4. Interfaces

(no remarks)

5. Nomenclature

(no elements)

6. Governing Equations

7. Remarks for Usage

(no remarks)

8. Validation

9. References

Z. Abdin, C.J. Webb, and E. MacA. Gray. Modelling and simulation of a proton exchange membrane (PEM) electrolyzer cell. International Journal of Hydrogen Energy, 40(39):13243-13257, 2015. doi:10.1016/j.ijhydene.2015.07.129.

T. E. Springer, T. A. Zawodzinski, and S. Gottesfeld, “Polymer Electrolyte Fuel Cell Model,” J. Electrochem. Soc., vol. 138, no. 8, pp. 2334–2342, 1991.

10. Version History

Created by John Webster (jcwebste@edu.uwaterloo.ca) October 2018.

Fixed by Carsten Bode (c.bode@tuhh.de) January 2019