modelTest_400A_Espinosa_L2
Test functionality of new electrolyzer model structure with Espinosa physics subcomponents
Extends from TransiEnt.Basics.Icons.Checkmodel (Icon for check models).
Information
1. Purpose of model
Runs on a constant 400A input current and contains an integrated squared deviation for comparison with (Espinosa-Lopez et al., 2018)'s results.
2. Level of detail, physical effects considered, and physical insight
(no remarks)
3. Limits of validity
(no remarks)
4. Interfaces
(no remarks)
5. Nomenclature
(no remarks)
6. Governing Equations
(no remarks)
7. Remarks for Usage
(no remarks)
8. Validation
(no remarks)
9. References
[1] Manuel Espinosa-López, Philippe Baucour, Serge Besse, Christophe Darras, Raynal Glises, Philippe Poggi, André Rakotondrainibe, and Pierre Serre-Combe. Modelling and experimental validation of a 46 kW PEM high pressure water electrolyser. Renewable Energy, 119, pp. 160-173, 2018. doi: 10.1016/J.RENENE.2017.11.081.
10. Version History
Created by John Webster (jcwebste@edu.uwaterloo.ca) October 2018.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| SI.Temperature | T_op_start | 273.15 + 25 | for 400A constant current |
| SI.Pressure | p_out | 35e5 | Pressure of the produced hydrogen |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| TransiEnt.Producer.Gas.Electrolyzer.PEMElectrolyzer_L2 | EM | ||
| TransiEnt.Components.Boundaries.Electrical.ActivePower.Frequency | ElectricGrid_0thOrder | ||
| TransiEnt.Components.Boundaries.Gas.BoundaryRealGas_pTxi | sink_0thOrder | ||
| TransiEnt.SimCenter | simCenter | ||
| Modelica.Blocks.Sources.Ramp | CurrentRamp | ||
| Modelica.Blocks.Sources.RealExpression | v_stackT1 | ||
| Modelica.Blocks.Sources.RealExpression | temp1 | ||
| Modelica.Blocks.Sources.CombiTimeTable | espExperimentalTemp | ||
| Modelica.Blocks.Sources.CombiTimeTable | espExperimentalVoltage |