modelTestHeatpumpWithControl_bivalent_fluidports_sine
Model for testing HeatpumpWithControl with fluid ports, bivalent operation and external temperature
Extends from TransiEnt.Basics.Icons.Checkmodel (Icon for check models).
Information
1. Purpose of model
Test environment for BivalentHeatpumpWithControl
2. Level of detail, physical effects considered, and physical insight
(Purely technical component without physical modeling.)
3. Limits of validity
(Purely technical component without physical modeling.)
4.Interfaces
(no remarks)
5. Nomenclature
(no elements)
6. Governing Equations
(no equations)
7. Remarks for Usage
(no remarks)
8. Validation
(no validation or testing necessary)
9. References
(no remarks)
10. Version History
Components
| Type | Name | Default | Description |
|---|---|---|---|
| SimCenter | simCenter | ||
| Modelica.Blocks.Sources.Constant | T_room_set_K1 | ||
| TransiEnt.Producer.Heat.Power2Heat.Heatpump.BivalentHeatPumpWithControl | heatPumpWithControl | ||
| ClaRa.Components.BoundaryConditions.BoundaryVLE_Txim_flow | source1 | ||
| TransiEnt.Components.Boundaries.Electrical.ActivePower.Frequency | electricGrid1 | ||
| Modelica.Blocks.Sources.Sine | T_room_is_K1 | ||
| ClaRa.Components.BoundaryConditions.BoundaryVLE_phxi | sink1 | ||
| ClaRa.Components.Sensors.SensorVLE_L1_T | temperature1 |
Contents
| Name | Description |
|---|---|
| plotResult |