modelCylindricWall_HeatTransfer
Extends from Partial_HeatTransfer.
Information
1. Purpose of model
Providing the thermal conductance for the model ThermalConductor from the Modelica Standard Library (MSL). Inside this model it is named lambda. The thermal conductance has to be constant during simulation.
2. Level of detail, physical effects considered, and physical insight
Providing parameter thermal conduction for one dimensional heat conductivity with constant thermal conduction.
3. Limits of validity
Just thermal conduction with constant heat conductivity considered. This model is just for cylindric geometries and considers just one insulation layer.
4. Interfaces
(no remarks)
5. Nomenclature
6. Governing Equations
(no equations)
7. Remarks for Usage
(no remarks)
8. Validation
(no validation)
9. References
(no remarks)
10. Version History
Model created by Tobias Ramm (tobias.ramm@tuhh.de) on Fri Mar 20 2015
Revised and edited by Lisa Andresen (andresen@tuhh.de), Jun 2015
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.ThermalConductance | lambda (from Partial_HeatTransfer) | Thermal conductance | |
| Modelica.Units.SI.Length | height | 1 | Height of cylinder (without insulation) |
| Modelica.Units.SI.Length | radius | 0.1 | Radius of cylinder (without insulation) |
| Modelica.Units.SI.Length | width | 0.1 | Thickness of insulation |
| Modelica.Units.SI.ThermalConductivity | k | 0.04 | Specific heat conductivity of insulation |