modelSolarInPortGeometry
Information
1. Purpose of model
Calculation of the storage layers (segments) the port is connected to. The layer depends on the height the port is located at, the height of one segment and the number of segments.
2. Level of detail, physical effects considered, and physical insight
No physical effects consideres.
3. Limits of validity
4. Interfaces
(no remarks)
5. Nomenclature
height_port: height the the lowest part of the port
length_port: vertical length of the port
height_segment: height of one storage segment
nSeg: number of storage segments
segment: calculated lowest segment the port is connected
nSeg: number of storage segments the port is connected
6. Governing Equations
(no equations)
7. Remarks for Usage
(no remarks)
8. Validation
(no validation)
9. References
(no remarks)
10. Version History
Model created by Tobias Ramm (tobias.ramm@tuhh.de) on Fri Mar 20 2015
Revised and edited by Lisa Andresen (andresen@tuhh.de), Jun 2015
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.Length | height_port | Height of lowest part of the heating coil | |
| Modelica.Units.SI.Length | height_segment | Height of one segment | |
| Integer | nSeg | Number of vertical tank segments | |
| Modelica.Units.SI.Length | length_port | length of port | |
| Integer | segment | Utilities.get_Layer(height_port, height_segment, nSeg) | Segment the lowest part of the port is located in |
| Integer | nSolar | segment - heighest_segment + 1 | Number of segments the solar ports are located in |