recordHeatPumpParameters
Information
1. Purpose of model
Accommodates all available parameters for HeatPumpParameters
2. Level of detail, physical effects considered, and physical insight
(no remarks)
3. Limits of validity
(no remarks)
4. Interfaces
(no remarks)
5. Nomenclature
(no remarks)
6. Governing Equations
(no remarks)
7. Remarks for Usage
(no remarks)
8. Validation
(no remarks)
9. References
(no remarks)
10. Version History
Model created during IntegraNet I
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| SI.HeatFlowRate | Q_flow_n | 3.5e3 | Nominal heat flow of heat pump at nominal conditions according to EN14511 |
| Real | COP_n | 3.7 | Heat pump coefficient of performance at nominal conditions according to EN14511 |
| String | T_source | "T_ground" | Temperature of heat source |
| SI.Power | P_el_backup | 10e3 | Nominal electric power of the backup heater |
| SI.Temperature | T_storage_min | 303.15 | Minimum storage temperature of heat pump system |
| SI.Temperature | T_storage_max | 313.15 | Maximum storage temperature of heat pump system |
| SI.Volume | V_storage | 0.2 | Volume of the storage of heat pump system |
| SI.Height | h_storage | 0.5 | Height of heat storage in heat pump system |
| Modelica.Units.NonSI.Temperature_degC | T_storage_amb | 15 | Assumed constant temperature in tank installation room in heat pump system |
| SI.SurfaceCoefficientOfHeatTransfer | k_storage | 0.08 | Coefficient of heat transfer through tank surface in heat pump system |