.WasteWater.ASM2d.SecClar.Otterpohl

Information

This package contains classes (layer models) to built ASM2d secondary clarifier models, an Interfaces sub-library
and provides an ASM2d 10-layer secondary clarifier model all bases on Otterpohls`s [1] 
sedimentation velocities for macro and micro flocs and the omega correction function.

A secondary clarifier layer model needs at least a top_layer, a feed_layer and a bottom_layer
and may have several upper_layer in between above the feed_layer and several lower_layer in
between below the feed_layer.

Main Author:
   Gerald Reichl
   Technische Universitaet Ilmenau
   Faculty of Informatics and Automation
   Department Dynamics and Simulation of ecological Systems
   P.O. Box 10 05 65
   98684 Ilmenau
   Germany
   email: gerald.reichl@tu-ilmenau.de

References:

[1] R. Otterpohl and M. Freund: Dynamic models for clarifiers of activated sludge plants
    with dry and wet weather flows. Water Science and Technology. 26 (1992), pp 1391-1400.

This package is free software; it can be redistributed and/or modified under the terms of the Modelica license, see the license conditions and the accompanying
disclaimer in the documentation of package Modelica in file "Modelica/package.mo".

Copyright (C) 2003, Gerald Reichl

Contents

Name	Description
Interfaces	Connectors and partial ASM2d models for Secondary Clarifier Model by Otterpohl
SecClarModOtter	ASM2d Secondary Clarifier Model based on Otterpohl
bottom_layer	Bottom layer of Otterpohls`s SC model
lower_layer	Layer below influent of Otterpohl`s SC model
feed_layer	Influent layer of Otterpohl`s SC model
upper_layer	Layer above influent of Otterpohl`s SC
top_layer	Effluent layer of Otterpohl`s SC model