modelTwoPoint
On-Off controller with hysteresis
Information
This is an on-off (two-point) controller with hysteresis.
The hysteresis is the difference beetween the parameter on
and off.
When the input signal exceeds the "on" value, the output signal
is "out_on" and when the input signal drops below the
"off" value, the output signal is "out_off".
Parameters
| Type | Name | Default | Description |
|---|
| Real | on | 1.0 | |
| Real | off | 0.0 | |
| Real | out_on | 1.0 | |
| Real | out_off | 0.0 | |
Components
| Type | Name | Default | Description |
|---|
| Boolean | mode | | |
| Modelica.Blocks.Interfaces.RealInput | e | | |
| Modelica.Blocks.Interfaces.RealOutput | u | | |
