modelpst1

Tap ratio part of the PST

Information

Development level

2

Parameters

TypeNameDefaultDescription
RealpiModelica.Constants.pi
RealSystemBase100
RealVbus120000Sending end Bus nominal voltage, change of base
RealVbus220000Receiving end Bus voltage, change of base
RealSn100Power rating MVA
RealVn120000Primary Voltage rating, V
RealVn220000Secondary voltage rating, V
Realfn50Frequency rating Hz
RealTm0.001Measurement time constant, s
RealKp0.05Proportional gain
RealKi0.01Integral gain
Realp_ref0.01Reference Power, p.u.
Realalpha_maxpi/2Maximum phase angle, rad
Realalpha_min-pi/2Minimum phase angle, rad
RealxT0.1Transformer Reactance, p.u.
RealrT0.01Transformer Resistance, p.u.
Realm0.98Transformer fixed tap ratio, p.u./p.u.
Realalpha00.002062339234360Initial angle, from power flow
Realpmes00.01from power flow
Realvk00.997649085060455Sending end bus voltage, from power flow
Realanglevk0-0.007392164704867Sending end bus angle, from power flow

Connectors

TypeNameDefaultDescription
iPSL.Connectors.PwPinp
iPSL.Connectors.PwPinn

Components

TypeNameDefaultDescription
RealvkVoltage at primary, p.u.
Realvm
Realanglevk
Realanglevm

Revisions

Copyright 2015-2016 RTE (France), SmarTS Lab (Sweden), AIA (Spain) and DTU (Denmark)

The authors can be contacted by email: info@itesla-ipsl.org

This Source Code Form is subject to the terms of the Mozilla Public License, v. 2.0.

If a copy of the MPL was not distributed with this file, You can obtain one at http://mozilla.org/MPL/2.0.