modelHYGOV
Information
Development level |
2 |
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Real | R | 0.05 | Permanent droop (pu) |
| Real | r | 0.3 | Temporary droop (pu) |
| Real | T_r | 5 | Governor time constant (s) |
| Real | T_f | 0.05 | Filter time constant (s) |
| Real | T_g | 0.5 | Servo time constant (s) |
| Real | VELM | 0.2 | Gate open/close velocity limit |
| Real | G_MAX | 0.9 | Maximum gate limit |
| Real | G_MIN | 0 | Minimum gate limit |
| Real | T_w | 1.25 | Water time constant (s) |
| Real | A_t | 1.2 | Turbine gain |
| Real | D_turb | 0.2 | Turbine damping |
| Real | q_NL | 0.08 | Water flow at no load |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealInput | SPEED | Machine speed deviation from nominal (pu) | |
| Modelica.Blocks.Interfaces.RealOutput | PMECH | Turbine mechanical power (pu) | |
| Modelica.Blocks.Interfaces.RealInput | PMECH0 | Initial turbine mechanical power (pu) |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Sources.Constant | n_ref | ||
| iPSL.NonElectrical.Continuous.SimpleLag | SimpleLag1 | ||
| Modelica.Blocks.Math.Gain | Gain3 | ||
| Modelica.Blocks.Math.Gain | Gain4 | ||
| Modelica.Blocks.Sources.Constant | hs | ||
| Modelica.Blocks.Continuous.Integrator | q | ||
| Modelica.Blocks.Sources.Constant | qNL | ||
| Modelica.Blocks.Math.Gain | Gain6 | ||
| iPSL.NonElectrical.Continuous.SimpleLag | g | servo_motor | |
| Modelica.Blocks.Nonlinear.Limiter | Velocity_Limiter | ||
| Modelica.Blocks.Continuous.LimIntegrator | Position_Limiter | ||
| Real | G | Gate opening (pu) | |
| Real | c | Desired gate opening (pu) | |
| Real | Q | Turbine flow (pu) | |
| Real | H | Turbine head (pu) | |
| Modelica.Blocks.Math.Add | add | ||
| Modelica.Blocks.Math.Add | add1 | ||
| Modelica.Blocks.Math.Division | division | ||
| Modelica.Blocks.Math.Product | product | ||
| Modelica.Blocks.Math.Add | add2 | ||
| Modelica.Blocks.Math.Add | add3 | ||
| Modelica.Blocks.Math.Add | add4 | ||
| Modelica.Blocks.Math.Product | product1 | ||
| Modelica.Blocks.Math.Product | product2 | ||
| NonElectrical.Continuous.SimpleLead | simpleLead |
Revisions
Copyright 2015-2016 RTE (France), SmarTS Lab (Sweden), AIA (Spain) and DTU (Denmark)
- RTE: http://www.rte-france.com
- SmarTS Lab, research group at KTH: https://www.kth.se/en
- AIA: http://www.aia.es/en/energy
- DTU: http://www.dtu.dk/english
The authors can be contacted by email: info@itesla-ipsl.org
This Source Code Form is subject to the terms of the Mozilla Public License, v. 2.0.
If a copy of the MPL was not distributed with this file, You can obtain one at http://mozilla.org/MPL/2.0.