modelZIP_Jimma

Jimma's Load

Extends from BaseClasses.baseLoad.

Information

Development level

3

Reference

Jimma's Load, PSAT Manual 2.1.8

Last update

September 2015

Author

Joan Russinol, SmarTS Lab, KTH Royal Institute of Technology

Contact

luigiv@kth.se

Remember: Pz+Pi+Pp=1 and Qz+Qi+Qp=1

Parameters

TypeNameDefaultDescription
RealSn (from baseLoad)S_bPower rating (MVA)
RealTf0.01Time constant of the high-pass filter (s)
RealPz0.33Conductance
RealPi0.33Active current
RealPp1 - Pz - PiActive power
RealQz0.33Susceptance
RealQi0.33Reactive current
RealQp1 - Qz - QiReactive power
RealKv100coefficient of the voltage time derivative (1/s)
Power flow data
RealV_b (from pfComponent)400Base voltage of the bus (kV)
RealV_0 (from pfComponent)1Voltage magnitude (pu)
Realangle_0 (from pfComponent)0Voltage angle (deg)
RealP_0 (from pfComponent)1Active power (MW)
RealQ_0 (from pfComponent)0Reactive power (MVAr)
RealS_b (from pfComponent)SysData.S_bSystem base power (MVA)
Realfn (from pfComponent)SysData.fnSystem Frequency (Hz)

Connectors

TypeNameDefaultDescription
iPSL.Connectors.PwPinp (from baseLoad)

Components

TypeNameDefaultDescription
SystemBaseSysData (from pfComponent)Must add this line in all models
RealV (from baseLoad)Voltage magnitude (pu)
RealAngle_V (from baseLoad)voltage angle (rad)
RealP (from baseLoad)Active power (pu)
RealQ (from baseLoad)Reactive power (pu)

Revisions

Copyright 2015-2016 RTE (France), SmarTS Lab (Sweden), AIA (Spain) and DTU (Denmark)

The authors can be contacted by email: info@itesla-ipsl.org

This Source Code Form is subject to the terms of the Mozilla Public License, v. 2.0.

If a copy of the MPL was not distributed with this file, You can obtain one at http://mozilla.org/MPL/2.0.