modelDriveTrain
Two mass model. Developed by DTU
Information
Development level |
2 |
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Real | Hgen | Inertia Constant of Generator | |
| Real | Hwtr | Inertia Constant of Wind Turbine Rotor | |
| Real | k_sh | Drive Train Stiffness | |
| Real | c_sh | Drive Train Damping | |
| Real | w_init | Initial Steady State WTR Speed | |
| Real | T_init | Initial Steady State Shaft Torque |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealInput | Paero | ||
| Modelica.Blocks.Interfaces.RealInput | Pag | ||
| Modelica.Blocks.Interfaces.RealOutput | w_wtr | ||
| Modelica.Blocks.Interfaces.RealOutput | w_gen |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Continuous.Integrator | imIntegrator | ||
| Modelica.Blocks.Math.Gain | imGain | ||
| Modelica.Blocks.Continuous.Integrator | imIntegrator1 | ||
| Modelica.Blocks.Continuous.Integrator | imIntegrator2 | ||
| Modelica.Blocks.Sources.Constant | imSetPoint | ||
| Modelica.Blocks.Sources.Constant | imSetPoint1 | ||
| Modelica.Blocks.Math.Add | add | ||
| Modelica.Blocks.Math.Division | division | ||
| Modelica.Blocks.Math.Add | add1 | ||
| Modelica.Blocks.Math.Add | add2 | ||
| Modelica.Blocks.Math.Add | add3 | ||
| Modelica.Blocks.Math.Add | add4 | ||
| Modelica.Blocks.Math.Add | add5 | ||
| Modelica.Blocks.Math.Division | division1 |
Revisions
Copyright 2015-2016 RTE (France), SmarTS Lab (Sweden), AIA (Spain) and DTU (Denmark)
- RTE: http://www.rte-france.com
- SmarTS Lab, research group at KTH: https://www.kth.se/en
- AIA: http://www.aia.es/en/energy
- DTU: http://www.dtu.dk/english
The authors can be contacted by email: info@itesla-ipsl.org
This Source Code Form is subject to the terms of the Mozilla Public License, v. 2.0.
If a copy of the MPL was not distributed with this file, You can obtain one at http://mozilla.org/MPL/2.0.