modelWT12T1
Information
Development level |
2 |
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Real | pi | Modelica.Constants.pi | |
| Real | wbase | 2*pi*50 | System base speed |
| Real | H | Total inertia constant sec | |
| Real | DAMP | Machine damping factor pu P/pu speed | |
| Real | Htfrac | Turbine inertia fraction (Hturb/H) | |
| Real | Freq1 | First shaft torsional resonant frequency Hz | |
| Real | Dshaft | Shaft damping factor (pu) | |
| Real | k0 | Shaft twist angle, rad | |
| Real | k10 | Turbine rotor speed deviation, pu | |
| Real | k20 | Generator speed deviation, pu | |
| Real | k30 | Generator rotor angle deviation, pu | |
| Real | Ht | H*Htfrac | |
| Real | Hg | H - Ht | |
| Real | Kshaft | ||
| Real | Paero | power on the rotor blade side, pu | |
| Real | w0 | Initial rotor slip | |
| Real | delta0 | Initial internal angle |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealOutput | WTRBSP | ||
| Modelica.Blocks.Interfaces.RealInput | WAEROT | From WT12A | |
| Modelica.Blocks.Interfaces.RealOutput | SPEED | ||
| Modelica.Blocks.Interfaces.RealInput | Pelec | ||
| Modelica.Blocks.Interfaces.RealOutput | RotorAD | Rotor angle deviation |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Continuous.Integrator | dwt | Turbine speed deviation, pu | |
| Modelica.Blocks.Math.Add | Tmech1 | ||
| Modelica.Blocks.Math.Add | add3 | ||
| Modelica.Blocks.Math.Gain | D_shaft | ||
| Modelica.Blocks.Math.Add | dwtg | ||
| Modelica.Blocks.Math.Gain | WBASE | ||
| Modelica.Blocks.Math.Add | add5 | ||
| Modelica.Blocks.Math.Gain | WBASE1 | ||
| Modelica.Blocks.Continuous.Integrator | dwg | ||
| Modelica.Blocks.Math.Gain | Damp | ||
| Modelica.Blocks.Math.Add3 | add3_1 | ||
| Modelica.Blocks.Math.Add | Tmech | ||
| Modelica.Blocks.Continuous.Integrator | theta_tg | ||
| Modelica.Blocks.Continuous.Integrator | state4 | ||
| Modelica.Blocks.Math.Add | add2 | ||
| Modelica.Blocks.Sources.Constant | VAR1 | Initial rotor slip | |
| Modelica.Blocks.Math.Gain | WBASE2 | ||
| Modelica.Blocks.Math.Division | product2 | ||
| Modelica.Blocks.Math.Add | wg | ||
| Modelica.Blocks.Sources.Constant | const | Initial rotor slip |
Revisions
Copyright 2015-2016 RTE (France), SmarTS Lab (Sweden), AIA (Spain) and DTU (Denmark)
- RTE: http://www.rte-france.com
- SmarTS Lab, research group at KTH: https://www.kth.se/en
- AIA: http://www.aia.es/en/energy
- DTU: http://www.dtu.dk/english
The authors can be contacted by email: info@itesla-ipsl.org
This Source Code Form is subject to the terms of the Mozilla Public License, v. 2.0.
If a copy of the MPL was not distributed with this file, You can obtain one at http://mozilla.org/MPL/2.0.