blockImMonostable
Monostable. 2014/03/10
Extends from Modelica.Blocks.Interfaces.SISO (Single Input Single Output continuous control block).
Information
Development level |
4 |
Reference |
Eurostag/Model Editor User's Manual |
Last update |
2016/05/18 by AIA |
Author |
RTE-AIA |
Contact |
Temporary overshoot for a threshold. The output's changeover from 0 to 1 (switching on) takes place when the input becomes greater than the threshold. The switched position is held during a time at least equal to T. Then, the changeover from 1 to 0 (switching off) takes place when the input once more falls (or has already fallen) below the threshold.
This Block is equivalent to spesific MONOSTABLE Block from Eurostag.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Real | S | Start | |
| Modelica.SIunits.Time | T | Pulse period |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| RealInput | u (from SISO) | Connector of Real input signal | |
| RealOutput | y (from SISO) | Connector of Real output signal |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Real | tau | ||
| Boolean | mode | ||
| Boolean | cond1 | ||
| Boolean | cond2 |