.wbEHPTlib.MapBased.Information .wbEHPTlib.MapBased.InformationThe map-based folder contains simple model whose only dynamics is due to their mechanical inertia.
The ice model, since implements an Internal Combustion Engine, can just deliver (never absorb) power, while the other two ("oneFlange" and "twoFlange") simulate electric drive trains, i.e. the assembly of an electric machine and the corresponding AC/DC converter, and therefore can absorb or deliver power.
The input torque of the ice model is in Newton-metres, while in the other cases it is normalised: it is between -1 and +1, where -1 means maximum available torque to be absorbed, +1 to be delivered.
Some of the models have a special "Conn" version that allows interfacing with the exterior by means of an expandable connector.
Note that usage of expandable connectors requires to give special names to the connector's variables, and therefore the models are more specific than their Modelica.Blocks.Connectors counterparts. Therefore here the models have receives specifi names such as "PsdGenConn" as a replacement of OneFlange: this is aone flance component to which we added a connector and spfcific signal names.
Names and meaning of the pre-defined quantities circulating through the connection bus in the model versions having "Conn" in their names.
The detailed meaning of different quantities are to be read in the corresponding Table in the accompanying document "webBookCeraolo" in its section PSD-HEV.