Check HUDSON testserver for the testsuite trace here (match revision 17628 to build jobs): https://test.openmodelica.org/hudson/ (time make -C testsuite -f Makefile > testsuite/testsuite-trace.txt 2>&1) || true real 62m49.864s user 1m20.417s sys 4m18.503s (time make -C testsuite/openmodelica/cruntime/msvc/ -f Makefile >> testsuite/testsuite-trace.txt 2>&1) || true real 0m15.860s user 0m0.198s sys 0m0.534s echo "log is in testsuite/testsuite-trace.txt" log is in testsuite/testsuite-trace.txt fgrep -v "... ok" testsuite/testsuite-trace.txt make[1]: Entering directory `/c/dev/OpenModelica/testsuite' make -C difftool make[2]: Entering directory `/c/dev/OpenModelica/testsuite/difftool' flex omc-diff.l gcc -o ../../build/bin/omc-diff".exe" lex.yy.c make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/difftool' make -C openmodelica/bootstrapping -f Makefile test > bootstrapping.log make -C flattening/libraries/msl31 -f Makefile test > msl31.log make -C flattening/libraries/msl32 -f Makefile test > msl32flattening.log make -C simulation/libraries/msl32 -f Makefile test > msl32simulation.log make -C openmodelica/cppruntime/libraries/msl32 -f Makefile test > msl32simulation_cpp.log msl32flattening.log done make -C flattening/libraries/msl31/multibody -f Makefile test > multibody.log msl31.log done make -C simulation/modelica/msl22 -f Makefile test > simulationmodelicamsl22.log simulationmodelicamsl22.log done make -C simulation/libraries/msl22/Electrical -f Makefile test > msl22electrical.log msl22electrical.log done make -C simulation/libraries/msl22/Mechanics -f Makefile test > msl22mechanics.log msl22mechanics.log done make -C flattening/libraries/msl22 -f Makefile test > msl22flattening.log multibody.log done make -C flattening/libraries/msl22/modelicaAdditions -f Makefile test > msl22additions.log msl22additions.log done make -C openmodelica/interactive-simulation -f Makefile test > interactive-simulation.log interactive-simulation.log done make -C simulation/libraries/msl31 -f Makefile test > msl31simulation.log bootstrapping.log done make -C flattening/libraries/msl31/media -f Makefile test > msl31media.log msl22flattening.log done make -C simulation/libraries/msl31/media -f Makefile test > msl31mediasimulation.log msl31mediasimulation.log done make -C flattening/libraries/msl31/fluid -f Makefile test > msl31fluid.log msl31media.log done make -C flattening/libraries/3rdParty/siemens -f Makefile test > siemens_nosim.log msl31fluid.log done make -C simulation/libraries/3rdParty/siemens -f Makefile test > siemens_simulation.log msl31simulation.log done make -C flattening/libraries/3rdParty/SiemensPower -f Makefile test > SiemensPower.log siemens_simulation.log done make -C flattening/libraries/3rdParty/HumMod -f Makefile test > hummod.log siemens_nosim.log done make -C simulation/libraries/3rdParty/ThermoSysPro -f Makefile test > ThermoSysPro_simulation.log SiemensPower.log done make -C flattening/libraries/3rdParty/ThermoSysPro -f Makefile test > ThermoSysPro_inst_and_check.log msl32simulation_cpp.log done make -C openmodelica/omcc -f Makefile test > omcc.log hummod.log done make -C flattening/libraries/3rdParty/Exercises -f Makefile test > flatteningExercises.log omcc.log done make -C flattening/libraries/3rdParty/PlanarMechanics -f Makefile test > flatteningPlanarMechanics.log flatteningPlanarMechanics.log done make -C simulation/libraries/3rdParty/TestMedia -f Makefile test > TestMedia.log flatteningExercises.log done make -j1 -C openmodelica/cppruntime -f Makefile test > cppruntime.log make[2]: warning: -jN forced in submake: disabling jobserver mode. TestMedia.log done make -C simulation/modelica/hpcom -f Makefile test > taskGraph.log cppruntime.log done make -j1 -C openmodelica/debugDumps -f Makefile test > debugDumps.log make[2]: warning: -jN forced in submake: disabling jobserver mode. taskGraph.log done make -j1 -C openmodelica/cruntime/optimization/basic -f Makefile test > optimization.log make[2]: warning: -jN forced in submake: disabling jobserver mode. optimization.log done make -C simulation/modelica/algorithms_functions -f Makefile test > simulationalgorithms-functions.log debugDumps.log done make -C simulation/modelica/arrays -f Makefile test > simulationarrays.log ThermoSysPro_simulation.log done make -C simulation/modelica/asserts -f Makefile test > simulationasserts.log simulationasserts.log done make -C simulation/modelica/built_in_functions -f Makefile test > simulationbuilt-in-functions.log simulationalgorithms-functions.log done make -C simulation/modelica/connectors -f Makefile test > simulationconnectors.log simulationarrays.log done make -C simulation/modelica/declarations -f Makefile test > simulationdeclarations.log simulationbuilt-in-functions.log done make -C simulation/modelica/enums -f Makefile test > simulationenums.log simulationenums.log done make -C simulation/modelica/equations -f Makefile test > simulationequations.log simulationconnectors.log done make -C simulation/modelica/events -f Makefile test > simulationevents.log simulationdeclarations.log done make -C simulation/modelica/external_functions -f Makefile test > simulationexternal-functions.log simulationexternal-functions.log done make -C simulation/modelica/indexreduction -f Makefile test > simulationindexreduction.log simulationevents.log done make -C simulation/modelica/inheritances -f Makefile test > simulationinheritances.log simulationinheritances.log done make -C simulation/modelica/japaneselanguage -f Makefile test > simulationjapaneselanguage.log simulationjapaneselanguage.log done make -C simulation/modelica/linear_system -f Makefile test > simualtionlinear_system.log simulationindexreduction.log done make -C simulation/modelica/nonlinear_system -f Makefile test > simulationnonlinear_system.log simualtionlinear_system.log done make -C simulation/modelica/others -f Makefile test > simulationothers.log simulationequations.log done make -C simulation/modelica/packages -f Makefile test > simulationpackages.log simulationpackages.log done make -C simulation/modelica/records -f Makefile test > simulationrecords.log simulationrecords.log done make -C simulation/modelica/solver -f Makefile test > simulationsolver.log simulationnonlinear_system.log done make -C simulation/modelica/types -f Makefile test > simulationtypes.log simulationtypes.log done make -C flattening/modelica/asserts -f Makefile test > modelicaasserts.log modelicaasserts.log done make -C flattening/modelica/algorithms-functions -f Makefile test > modelicaalgorithms-functions.log simulationsolver.log done make -C flattening/modelica/arrays -f Makefile test > modelicaarrays.log simulationothers.log done make -C flattening/modelica/others -f Makefile test > modelicaothers.log modelicaalgorithms-functions.log done make -C flattening/modelica/external-functions -f Makefile test > modelicaexternal-functions.log modelicaexternal-functions.log done make -C flattening/modelica/equations -f Makefile test > modelicaequations.log modelicaarrays.log done make -C flattening/modelica/built-in-functions -f Makefile test > modelicabuilt-in-functions.log ThermoSysPro_inst_and_check.log done make -C flattening/modelica/extends -f Makefile test > modelicaextends.log modelicaequations.log done make -C flattening/modelica/operators -f Makefile test > modelicaoperators.log modelicaothers.log done make -C flattening/modelica/packages -f Makefile test > modelicapackages.log modelicapackages.log done make -C flattening/modelica/declarations -f Makefile test > modelicadeclarations.log modelicaextends.log done make -C flattening/modelica/enums -f Makefile test > modelicaenums.log modelicabuilt-in-functions.log done make -C flattening/modelica/scoping -f Makefile test > modelicascoping.log modelicaoperators.log done make -C flattening/modelica/types -f Makefile test > modelicatypes.log modelicaenums.log done make -C flattening/modelica/modification -f Makefile test > modelicamodification.log modelicascoping.log done make -C flattening/modelica/connectors -f Makefile test > modelicaconnectors.log modelicatypes.log done make -C flattening/modelica/blocks -f Makefile test > modelicablocks.log modelicablocks.log done make -C openmodelica/parser -f Makefile test > parser.log modelicadeclarations.log done make -C metamodelica/meta -f Makefile test > meta.log modelicamodification.log done make -C openmodelica/dependency -f Makefile test > dependency.log dependency.log done make -C flattening/libraries/biochem -f Makefile test > biochem.log modelicaconnectors.log done make -C flattening/modelica/msl -f Makefile test > flatteningmodelicamsl.log parser.log done make -C metamodelica/MetaModelicaDev -f Makefile test > mmdev.log biochem.log done make -C flattening/modelica/mosfiles -f Makefile test > flatteningmosfiles.log flatteningmodelicamsl.log done make -C openmodelica/interactive-API -f Makefile test > interactive-API.log Execution failed! make[3]: *** [Emit.mo] Error 1 mmdev.log done make -C openmodelica/typed-API -f Makefile test > typed-API.log typed-API.log done make -C flattening/modelica/records -f Makefile test > records.log records.log done make -C flattening/modelica/expandable -f Makefile test > expandable.log flatteningmosfiles.log done make -C openmodelica/linearization -f Makefile test > linearization.log expandable.log done make -C openmodelica/modelicaML -f Makefile test > modelicaML.log interactive-API.log done make -C flattening/modelica/streams -f Makefile test > streams.log modelicaML.log done make -C flattening/modelica/redeclare -f Makefile test > redeclare.log streams.log done make -C openmodelica/fmi/ModelExchange -f Makefile test > fmi_me.log redeclare.log done make -C openmodelica/fmi/CoSimulationStandAlone -f Makefile test > fmi_cs_st.log fmi_cs_st.log done make -C openmodelica/uncertainties -f Makefile test > uncertainties.log uncertainties.log done make -C flattening/modelica/scodeinst -f Makefile test > scodeinst.log linearization.log done make -C openmodelica/xml -f Makefile test > xml.log xml.log done meta.log done scodeinst.log done fmi_me.log done msl32simulation.log done make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/libraries/3rdParty/SiemensPower' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 2 tests failed [flattening/libraries/3rdParty/SiemensPower, time: 180] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/libraries/3rdParty/SiemensPower' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/simulation/libraries/3rdParty/TestMedia' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 4 tests failed [simulation/libraries/3rdParty/TestMedia, time: 58] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/simulation/libraries/3rdParty/TestMedia' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/libraries/3rdParty/ThermoSysPro' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 60 tests failed [flattening/libraries/3rdParty/ThermoSysPro, time: 1005] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/libraries/3rdParty/ThermoSysPro' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/simulation/libraries/3rdParty/ThermoSysPro' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 35 tests failed [simulation/libraries/3rdParty/ThermoSysPro, time: 616] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/simulation/libraries/3rdParty/ThermoSysPro' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/libraries/biochem' Running tests: OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 6 tests failed [flattening/libraries/biochem, time: 54] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/libraries/biochem' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/openmodelica/bootstrapping' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build + DumpTest ... execution failed ==== Log /tmp/omc-rtest-build/openmodelica/bootstrapping/log-DumpTest.mos "true true " "" true "" true true "DumpGraphviz.dump" graph AST { GVNOD0[label="ROOT"];GVNOD1[label="PURE FUNCTION"];GVNOD1 -- GVNOD0; } "" "Dump.dump" "Absyn.PROGRAM([ Absyn.CLASS(\"dummyClass\", true, true, true, Absyn.R_FUNCTION(Absyn.FR_NORMAL_FUNCTION(Absyn.PURE)), Absyn.PARTS([], NONE()), Absyn.INFO(\"\", false, 0, 0, 0, 0)) ],Absyn.TOP) " "" "Dump.unparseStr" "final encapsulated partial pure function dummyClass end dummyClass; " "" "Dump.getAstAsCorbaString" "record Absyn.PROGRAM classes = {record Absyn.CLASS name = \"dummyClass\", partialPrefix = true, finalPrefix = true, encapsulatedPrefix = true, restriction = record Absyn.R_FUNCTION functionRestriction = record Absyn.FR_NORMAL_FUNCTION purity = record Absyn.PURE end Absyn.PURE; end Absyn.FR_NORMAL_FUNCTION;end Absyn.R_FUNCTION;, body = record Absyn.PARTS typeVars = {}, classParts = {}, ann = {}, comment = NONE() end Absyn.PARTS;, info = record Absyn.INFO fileName = \"\", isReadOnly = false, lineNumberStart = 0, columnNumberStart = 0, lineNumberEnd = 0, columnNumberEnd = 0, buildTimes = record Absyn.TIMESTAMP lastBuildTime = 0.0, lastEditTime = 0.0 end Absyn.TIMESTAMP; end Absyn.INFO; end Absyn.CLASS;}, within_ = record Absyn.TOP end Absyn.TOP;, globalBuildTimes = record Absyn.TIMESTAMP lastBuildTime = 0.0, lastEditTime = 0.0 end Absyn.TIMESTAMP; end Absyn.PROGRAM;" "" record DAE.Exp.ICONST integer = 42 end DAE.Exp.ICONST; "" "ExpressionDump.printExpStr" "42" "" record DAE.DAElist.DAE elementLst = {} end DAE.DAElist.DAE; "" "DAEDump.dumpDebugDAE" "" "" record Values.Value.INTEGER integer = 42 end Values.Value.INTEGER; "" "ValuesUtil.valString" "42" "" + UtilTest ... equation mismatch [time:35] ==== Log /tmp/omc-rtest-build/openmodelica/bootstrapping/log-UtilTest.mos true true true true true true "" true "" "Error: Error building simulator. Build log: \tools\MinGW\bin\mingw32-make[3]: Entering directory `c:/dev/OpenModelica/testsuite/openmodelica/bootstrapping' gcc -I"c:/dev/OpenModelica/build/include/omc" -O0 -g -falign-functions -msse2 -mfpmath=sse -c -o List_intRange2.o List_intRange2.c gcc -I"c:/dev/OpenModelica/build/include/omc" -O0 -g -falign-functions -msse2 -mfpmath=sse -c -o List_intRange2_records.o List_intRange2_records.c g++ -shared -Xlinker --export-all-symbols -o List_intRange2.dll List_intRange2.o List_intRange2_records.o -lomcruntime -lintl -liconv -lexpat -lsqlite3 -llpsolve55 -lmico2313 -lws2_32 -lregex -I"c:/dev/OpenModelica/build/include/omc" -O0 -g -falign-functions -msse2 -mfpmath=sse -L"c:/dev/OpenModelica/build/lib/omc" -Wl,-rpath,'c:/dev/OpenModelica/build/lib/omc' -lOpenModelicaRuntimeC -lregex -lexpat -lgc -lpthread -fopenmp -loleaut32 -static-libgcc -luuid -loleaut32 -lole32 -lws2_32 -lsundials_kinsol -lsundials_nvecserial -lipopt -lcoinmumps -lcoinmetis -lpthread -lm -lgfortranbegin -lgfortran -lmingw32 -lgcc_eh -lmoldname -lmingwex -lmsvcrt -luser32 -lkernel32 -ladvapi32 -lshell32 -llapack-mingw -ltmglib-mingw -lblas-mingw -lf2c -lm \tools\MinGW\bin\mingw32-make[3]: Leaving directory `c:/dev/OpenModelica/testsuite/openmodelica/bootstrapping' " "Error: Error building simulator. Build log: \tools\MinGW\bin\mingw32-make[3]: Entering directory `c:/dev/OpenModelica/testsuite/openmodelica/bootstrapping' gcc -I"c:/dev/OpenModelica/build/include/omc" -O0 -g -falign-functions -msse2 -mfpmath=sse -c -o List_intRange2.o List_intRange2.c gcc -I"c:/dev/OpenModelica/build/include/omc" -O0 -g -falign-functions -msse2 -mfpmath=sse -c -o List_intRange2_records.o List_intRange2_records.c g++ -shared -Xlinker --export-all-symbols -o List_intRange2.dll List_intRange2.o List_intRange2_records.o -lomcruntime -lintl -liconv -lexpat -lsqlite3 -llpsolve55 -lmico2313 -lws2_32 -lregex -I"c:/dev/OpenModelica/build/include/omc" -O0 -g -falign-functions -msse2 -mfpmath=sse -L"c:/dev/OpenModelica/build/lib/omc" -Wl,-rpath,'c:/dev/OpenModelica/build/lib/omc' -lOpenModelicaRuntimeC -lregex -lexpat -lgc -lpthread -fopenmp -loleaut32 -static-libgcc -luuid -loleaut32 -lole32 -lws2_32 -lsundials_kinsol -lsundials_nvecserial -lipopt -lcoinmumps -lcoinmetis -lpthread -lm -lgfortranbegin -lgfortran -lmingw32 -lgcc_eh -lmoldname -lmingwex -lmsvcrt -luser32 -lkernel32 -ladvapi32 -lshell32 -llapack-mingw -ltmglib-mingw -lblas-mingw -lf2c -lm \tools\MinGW\bin\mingw32-make[3]: Leaving directory `c:/dev/OpenModelica/testsuite/openmodelica/bootstrapping' " "Error: Error building simulator. Build log: \tools\MinGW\bin\mingw32-make[3]: Entering directory `c:/dev/OpenModelica/testsuite/openmodelica/bootstrapping' gcc -I"c:/dev/OpenModelica/build/include/omc" -O0 -g -falign-functions -msse2 -mfpmath=sse -c -o List_intRange2.o List_intRange2.c gcc -I"c:/dev/OpenModelica/build/include/omc" -O0 -g -falign-functions -msse2 -mfpmath=sse -c -o List_intRange2_records.o List_intRange2_records.c g++ -shared -Xlinker --export-all-symbols -o List_intRange2.dll List_intRange2.o List_intRange2_records.o -lomcruntime -lintl -liconv -lexpat -lsqlite3 -llpsolve55 -lmico2313 -lws2_32 -lregex -I"c:/dev/OpenModelica/build/include/omc" -O0 -g -falign-functions -msse2 -mfpmath=sse -L"c:/dev/OpenModelica/build/lib/omc" -Wl,-rpath,'c:/dev/OpenModelica/build/lib/omc' -lOpenModelicaRuntimeC -lregex -lexpat -lgc -lpthread -fopenmp -loleaut32 -static-libgcc -luuid -loleaut32 -lole32 -lws2_32 -lsundials_kinsol -lsundials_nvecserial -lipopt -lcoinmumps -lcoinmetis -lpthread -lm -lgfortranbegin -lgfortran -lmingw32 -lgcc_eh -lmoldname -lmingwex -lmsvcrt -luser32 -lkernel32 -ladvapi32 -lshell32 -llapack-mingw -ltmglib-mingw -lblas-mingw -lf2c -lm \tools\MinGW\bin\mingw32-make[3]: Leaving directory `c:/dev/OpenModelica/testsuite/openmodelica/bootstrapping' " "Error: Error building simulator. Build log: \tools\MinGW\bin\mingw32-make[3]: Entering directory `c:/dev/OpenModelica/testsuite/openmodelica/bootstrapping' gcc -I"c:/dev/OpenModelica/build/include/omc" -O0 -g -falign-functions -msse2 -mfpmath=sse -c -o List_intRange2.o List_intRange2.c gcc -I"c:/dev/OpenModelica/build/include/omc" -O0 -g -falign-functions -msse2 -mfpmath=sse -c -o List_intRange2_records.o List_intRange2_records.c g++ -shared -Xlinker --export-all-symbols -o List_intRange2.dll List_intRange2.o List_intRange2_records.o -lomcruntime -lintl -liconv -lexpat -lsqlite3 -llpsolve55 -lmico2313 -lws2_32 -lregex -I"c:/dev/OpenModelica/build/include/omc" -O0 -g -falign-functions -msse2 -mfpmath=sse -L"c:/dev/OpenModelica/build/lib/omc" -Wl,-rpath,'c:/dev/OpenModelica/build/lib/omc' -lOpenModelicaRuntimeC -lregex -lexpat -lgc -lpthread -fopenmp -loleaut32 -static-libgcc -luuid -loleaut32 -lole32 -lws2_32 -lsundials_kinsol -lsundials_nvecserial -lipopt -lcoinmumps -lcoinmetis -lpthread -lm -lgfortranbegin -lgfortran -lmingw32 -lgcc_eh -lmoldname -lmingwex -lmsvcrt -luser32 -lkernel32 -ladvapi32 -lshell32 -llapack-mingw -ltmglib-mingw -lblas-mingw -lf2c -lm \tools\MinGW\bin\mingw32-make[3]: Leaving directory `c:/dev/OpenModelica/testsuite/openmodelica/bootstrapping' " (759,{"3","6","9","12","15","18","21","24","27","30","33","36","39","42","45","48","51","54","57","60","63","66"}) "Error: Error building simulator. Build log: \tools\MinGW\bin\mingw32-make[3]: Entering directory `c:/dev/OpenModelica/testsuite/openmodelica/bootstrapping' gcc -I"c:/dev/OpenModelica/build/include/omc" -O0 -g -falign-functions -msse2 -mfpmath=sse -c -o List_intRange2.o List_intRange2.c gcc -I"c:/dev/OpenModelica/build/include/omc" -O0 -g -falign-functions -msse2 -mfpmath=sse -c -o List_intRange2_records.o List_intRange2_records.c g++ -shared -Xlinker --export-all-symbols -o List_intRange2.dll List_intRange2.o List_intRange2_records.o -lomcruntime -lintl -liconv -lexpat -lsqlite3 -llpsolve55 -lmico2313 -lws2_32 -lregex -I"c:/dev/OpenModelica/build/include/omc" -O0 -g -falign-functions -msse2 -mfpmath=sse -L"c:/dev/OpenModelica/build/lib/omc" -Wl,-rpath,'c:/dev/OpenModelica/build/lib/omc' -lOpenModelicaRuntimeC -lregex -lexpat -lgc -lpthread -fopenmp -loleaut32 -static-libgcc -luuid -loleaut32 -lole32 -lws2_32 -lsundials_kinsol -lsundials_nvecserial -lipopt -lcoinmumps -lcoinmetis -lpthread -lm -lgfortranbegin -lgfortran -lmingw32 -lgcc_eh -lmoldname -lmingwex -lmsvcrt -luser32 -lkernel32 -ladvapi32 -lshell32 -llapack-mingw -ltmglib-mingw -lblas-mingw -lf2c -lm \tools\MinGW\bin\mingw32-make[3]: Leaving directory `c:/dev/OpenModelica/testsuite/openmodelica/bootstrapping' " ({1,2},{1,2}) "" fail() "" {"Myprefix: abc","Myprefix: 123"} "" ({1,3,5},{2,4,6}) "" ({SOME(1),SOME(2),SOME(3)},{NONE(),NONE(),NONE()}) "" {"abc","def"} "" {{"1","2"},{"3","4","5"}} "" ({1,2,3},{4,5}) "" {"1.0","2.0","3.0","4.0","5.0"} "" 0 "" {2,3,4,5} "" {2,3,4,5} "" {1,2,4,5} "" {{1,2},{3,4}} "" {1,3,4,5,6} "" {"a","A","B","c"} "" ({1,2},{3,4,5}) "" ({{2,3,4},{5,6,7},{8,9}},36) "" Equation mismatch: diff says: --- /tmp/omc-rtest-build/openmodelica/bootstrapping/equations-expected 2013-10-09 16:21:56 +0200 +++ /tmp/omc-rtest-build/openmodelica/bootstrapping/equations-got 2013-10-09 16:22:31 +0200 @@ -5,20 +5,50 @@ true true "" true "" -22000 -"" -{1,2,3,4,5,6,7,8,9,10} -"" -{10,9,8,7,6,5,4,3,2,1} -"" -{1} -"" + +"Error: Error building simulator. Build log: \tools\MinGW\bin\mingw32-make[3]: Entering directory `c:/dev/OpenModelica/testsuite/openmodelica/bootstrapping' +gcc -I"c:/dev/OpenModelica/build/include/omc" -O0 -g -falign-functions -msse2 -mfpmath=sse -c -o List_intRange2.o List_intRange2.c +gcc -I"c:/dev/OpenModelica/build/include/omc" -O0 -g -falign-functions -msse2 -mfpmath=sse -c -o List_intRange2_records.o List_intRange2_records.c +g++ -shared -Xlinker --export-all-symbols -o List_intRange2.dll List_intRange2.o List_intRange2_records.o -lomcruntime -lintl -liconv -lexpat -lsqlite3 -llpsolve55 -lmico2313 -lws2_32 -lregex -I"c:/dev/OpenModelica/build/include/omc" -O0 -g -falign-functions -msse2 -mfpmath=sse -L"c:/dev/OpenModelica/build/lib/omc" -Wl,-rpath,'c:/dev/OpenModelica/build/lib/omc' -lOpenModelicaRuntimeC -lregex -lexpat -lgc -lpthread -fopenmp -loleaut32 -static-libgcc -luuid -loleaut32 -lole32 -lws2_32 -lsundials_kinsol -lsundials_nvecserial -lipopt -lcoinmumps -lcoinmetis -lpthread -lm -lgfortranbegin -lgfortran -lmingw32 -lgcc_eh -lmoldname -lmingwex -lmsvcrt -luser32 -lkernel32 -ladvapi32 -lshell32 -llapack-mingw -ltmglib-mingw -lblas-mingw -lf2c -lm +\tools\MinGW\bin\mingw32-make[3]: Leaving directory `c:/dev/OpenModelica/testsuite/openmodelica/bootstrapping' + +" + +"Error: Error building simulator. Build log: \tools\MinGW\bin\mingw32-make[3]: Entering directory `c:/dev/OpenModelica/testsuite/openmodelica/bootstrapping' +gcc -I"c:/dev/OpenModelica/build/include/omc" -O0 -g -falign-functions -msse2 -mfpmath=sse -c -o List_intRange2.o List_intRange2.c +gcc -I"c:/dev/OpenModelica/build/include/omc" -O0 -g -falign-functions -msse2 -mfpmath=sse -c -o List_intRange2_records.o List_intRange2_records.c +g++ -shared -Xlinker --export-all-symbols -o List_intRange2.dll List_intRange2.o List_intRange2_records.o -lomcruntime -lintl -liconv -lexpat -lsqlite3 -llpsolve55 -lmico2313 -lws2_32 -lregex -I"c:/dev/OpenModelica/build/include/omc" -O0 -g -falign-functions -msse2 -mfpmath=sse -L"c:/dev/OpenModelica/build/lib/omc" -Wl,-rpath,'c:/dev/OpenModelica/build/lib/omc' -lOpenModelicaRuntimeC -lregex -lexpat -lgc -lpthread -fopenmp -loleaut32 -static-libgcc -luuid -loleaut32 -lole32 -lws2_32 -lsundials_kinsol -lsundials_nvecserial -lipopt -lcoinmumps -lcoinmetis -lpthread -lm -lgfortranbegin -lgfortran -lmingw32 -lgcc_eh -lmoldname -lmingwex -lmsvcrt -luser32 -lkernel32 -ladvapi32 -lshell32 -llapack-mingw -ltmglib-mingw -lblas-mingw -lf2c -lm +\tools\MinGW\bin\mingw32-make[3]: Leaving directory `c:/dev/OpenModelica/testsuite/openmodelica/bootstrapping' + +" + +"Error: Error building simulator. Build log: \tools\MinGW\bin\mingw32-make[3]: Entering directory `c:/dev/OpenModelica/testsuite/openmodelica/bootstrapping' +gcc -I"c:/dev/OpenModelica/build/include/omc" -O0 -g -falign-functions -msse2 -mfpmath=sse -c -o List_intRange2.o List_intRange2.c +gcc -I"c:/dev/OpenModelica/build/include/omc" -O0 -g -falign-functions -msse2 -mfpmath=sse -c -o List_intRange2_records.o List_intRange2_records.c +g++ -shared -Xlinker --export-all-symbols -o List_intRange2.dll List_intRange2.o List_intRange2_records.o -lomcruntime -lintl -liconv -lexpat -lsqlite3 -llpsolve55 -lmico2313 -lws2_32 -lregex -I"c:/dev/OpenModelica/build/include/omc" -O0 -g -falign-functions -msse2 -mfpmath=sse -L"c:/dev/OpenModelica/build/lib/omc" -Wl,-rpath,'c:/dev/OpenModelica/build/lib/omc' -lOpenModelicaRuntimeC -lregex -lexpat -lgc -lpthread -fopenmp -loleaut32 -static-libgcc -luuid -loleaut32 -lole32 -lws2_32 -lsundials_kinsol -lsundials_nvecserial -lipopt -lcoinmumps -lcoinmetis -lpthread -lm -lgfortranbegin -lgfortran -lmingw32 -lgcc_eh -lmoldname -lmingwex -lmsvcrt -luser32 -lkernel32 -ladvapi32 -lshell32 -llapack-mingw -ltmglib-mingw -lblas-mingw -lf2c -lm +\tools\MinGW\bin\mingw32-make[3]: Leaving directory `c:/dev/OpenModelica/testsuite/openmodelica/bootstrapping' + +" + +"Error: Error building simulator. Build log: \tools\MinGW\bin\mingw32-make[3]: Entering directory `c:/dev/OpenModelica/testsuite/openmodelica/bootstrapping' +gcc -I"c:/dev/OpenModelica/build/include/omc" -O0 -g -falign-functions -msse2 -mfpmath=sse -c -o List_intRange2.o List_intRange2.c +gcc -I"c:/dev/OpenModelica/build/include/omc" -O0 -g -falign-functions -msse2 -mfpmath=sse -c -o List_intRange2_records.o List_intRange2_records.c +g++ -shared -Xlinker --export-all-symbols -o List_intRange2.dll List_intRange2.o List_intRange2_records.o -lomcruntime -lintl -liconv -lexpat -lsqlite3 -llpsolve55 -lmico2313 -lws2_32 -lregex -I"c:/dev/OpenModelica/build/include/omc" -O0 -g -falign-functions -msse2 -mfpmath=sse -L"c:/dev/OpenModelica/build/lib/omc" -Wl,-rpath,'c:/dev/OpenModelica/build/lib/omc' -lOpenModelicaRuntimeC -lregex -lexpat -lgc -lpthread -fopenmp -loleaut32 -static-libgcc -luuid -loleaut32 -lole32 -lws2_32 -lsundials_kinsol -lsundials_nvecserial -lipopt -lcoinmumps -lcoinmetis -lpthread -lm -lgfortranbegin -lgfortran -lmingw32 -lgcc_eh -lmoldname -lmingwex -lmsvcrt -luser32 -lkernel32 -ladvapi32 -lshell32 -llapack-mingw -ltmglib-mingw -lblas-mingw -lf2c -lm +\tools\MinGW\bin\mingw32-make[3]: Leaving directory `c:/dev/OpenModelica/testsuite/openmodelica/bootstrapping' + +" (759,{"3","6","9","12","15","18","21","24","27","30","33","36","39","42","45","48","51","54","57","60","63","66"}) -"" +"Error: Error building simulator. Build log: \tools\MinGW\bin\mingw32-make[3]: Entering directory `c:/dev/OpenModelica/testsuite/openmodelica/bootstrapping' +gcc -I"c:/dev/OpenModelica/build/include/omc" -O0 -g -falign-functions -msse2 -mfpmath=sse -c -o List_intRange2.o List_intRange2.c +gcc -I"c:/dev/OpenModelica/build/include/omc" -O0 -g -falign-functions -msse2 -mfpmath=sse -c -o List_intRange2_records.o List_intRange2_records.c +g++ -shared -Xlinker --export-all-symbols -o List_intRange2.dll List_intRange2.o List_intRange2_records.o -lomcruntime -lintl -liconv -lexpat -lsqlite3 -llpsolve55 -lmico2313 -lws2_32 -lregex -I"c:/dev/OpenModelica/build/include/omc" -O0 -g -falign-functions -msse2 -mfpmath=sse -L"c:/dev/OpenModelica/build/lib/omc" -Wl,-rpath,'c:/dev/OpenModelica/build/lib/omc' -lOpenModelicaRuntimeC -lregex -lexpat -lgc -lpthread -fopenmp -loleaut32 -static-libgcc -luuid -loleaut32 -lole32 -lws2_32 -lsundials_kinsol -lsundials_nvecserial -lipopt -lcoinmumps -lcoinmetis -lpthread -lm -lgfortranbegin -lgfortran -lmingw32 -lgcc_eh -lmoldname -lmingwex -lmsvcrt -luser32 -lkernel32 -ladvapi32 -lshell32 -llapack-mingw -ltmglib-mingw -lblas-mingw -lf2c -lm +\tools\MinGW\bin\mingw32-make[3]: Leaving directory `c:/dev/OpenModelica/testsuite/openmodelica/bootstrapping' + +" ({1,2},{1,2}) "" fail() "" {"Myprefix: abc","Myprefix: 123"} Equation mismatch: omc-diff says: Line 10: Lexical token differs: expected: 22000 got: == 2 out of 12 tests failed [openmodelica/bootstrapping, time: 638] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/openmodelica/bootstrapping' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/openmodelica/cppruntime' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 6 tests failed [openmodelica/cppruntime, time: 68] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/openmodelica/cppruntime' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/openmodelica/debugDumps' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 14 tests failed [openmodelica/debugDumps, time: 268] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/openmodelica/debugDumps' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/openmodelica/dependency' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 2 tests failed [openmodelica/dependency, time: 10] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/openmodelica/dependency' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/modelica/expandable' Running tests: == 0 out of 2 tests failed [flattening/modelica/expandable, time: 7] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/modelica/expandable' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/libraries/3rdParty/Exercises' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 2 tests failed [flattening/libraries/3rdParty/Exercises, time: 68] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/libraries/3rdParty/Exercises' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/libraries/3rdParty/PlanarMechanics' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 2 tests failed [flattening/libraries/3rdParty/PlanarMechanics, time: 32] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/libraries/3rdParty/PlanarMechanics' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/modelica/msl' Running tests: == 0 out of 60 tests failed [flattening/modelica/msl, time: 44] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/modelica/msl' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/modelica/mosfiles' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build + ExternalLibraryFunction ... equation mismatch [time:8] ==== Log /tmp/omc-rtest-build/flattening/modelica/mosfiles/log-ExternalLibraryFunction.mos true true "" true "Test" "c:\\dev\\OpenModelica\\testsuite\\flattening\\modelica\\mosfiles\\TestLibrary" "c:\\dev\\OpenModelica\\testsuite\\flattening\\modelica\\mosfiles\\TestLibrary" 42.1 "" "Error: Error building simulator. Build log: \tools\MinGW\bin\mingw32-make[3]: Entering directory `c:/dev/OpenModelica/testsuite/flattening/modelica/mosfiles' gcc -I"c:/dev/OpenModelica/build/include/omc" -O0 -falign-functions -msse2 -mfpmath=sse -c -o Test_ext2.o Test_ext2.c gcc -I"c:/dev/OpenModelica/build/include/omc" -O0 -falign-functions -msse2 -mfpmath=sse -c -o Test_ext2_records.o Test_ext2_records.c g++ -shared -Xlinker --export-all-symbols -o Test_ext2.dll Test_ext2.o Test_ext2_records.o -lext2 -I"c:/dev/OpenModelica/build/include/omc" -O0 -falign-functions -msse2 -mfpmath=sse -L"c:/dev/OpenModelica/build/lib/omc" -Wl,-rpath,'c:/dev/OpenModelica/build/lib/omc' -lOpenModelicaRuntimeC -lregex -lexpat -lgc -lpthread -fopenmp -loleaut32 -static-libgcc -luuid -loleaut32 -lole32 -lws2_32 -lsundials_kinsol -lsundials_nvecserial -lipopt -lcoinmumps -lcoinmetis -lpthread -lm -lgfortranbegin -lgfortran -lmingw32 -lgcc_eh -lmoldname -lmingwex -lmsvcrt -luser32 -lkernel32 -ladvapi32 -lshell32 -llapack-mingw -ltmglib-mingw -lblas-mingw -lf2c -lm c:/omdev/tools/mingw/bin/../lib/gcc/mingw32/4.4.0/../../../../mingw32/bin/ld.exe: cannot find -lext2 collect2: ld returned 1 exit status \tools\MinGW\bin\mingw32-make[3]: *** [Test_ext2] Error 1 \tools\MinGW\bin\mingw32-make[3]: Leaving directory `c:/dev/OpenModelica/testsuite/flattening/modelica/mosfiles' " 42.3 "" "Error: Error building simulator. Build log: \tools\MinGW\bin\mingw32-make[3]: Entering directory `c:/dev/OpenModelica/testsuite/flattening/modelica/mosfiles' gcc -I"c:/dev/OpenModelica/build/include/omc" -O0 -falign-functions -msse2 -mfpmath=sse -c -o Test_ext4.o Test_ext4.c In file included from Test_ext4.c:1: Test_ext4.h:26:18: error: ext4.c: No such file or directory \tools\MinGW\bin\mingw32-make[3]: *** [Test_ext4] Error 1 \tools\MinGW\bin\mingw32-make[3]: Leaving directory `c:/dev/OpenModelica/testsuite/flattening/modelica/mosfiles' " Equation mismatch: diff says: --- /tmp/omc-rtest-build/flattening/modelica/mosfiles/equations-expected 2013-10-09 16:56:36 +0200 +++ /tmp/omc-rtest-build/flattening/modelica/mosfiles/equations-got 2013-10-09 16:56:44 +0200 @@ -1,15 +1,31 @@ true true "" true "Test" -"flattening/modelica/mosfiles/TestLibrary" -"flattening/modelica/mosfiles/TestLibrary" +"c:\\dev\\OpenModelica\\testsuite\\flattening\\modelica\\mosfiles\\TestLibrary" +"c:\\dev\\OpenModelica\\testsuite\\flattening\\modelica\\mosfiles\\TestLibrary" 42.1 "" -42.2 -"" + +"Error: Error building simulator. Build log: \tools\MinGW\bin\mingw32-make[3]: Entering directory `c:/dev/OpenModelica/testsuite/flattening/modelica/mosfiles' +gcc -I"c:/dev/OpenModelica/build/include/omc" -O0 -falign-functions -msse2 -mfpmath=sse -c -o Test_ext2.o Test_ext2.c +gcc -I"c:/dev/OpenModelica/build/include/omc" -O0 -falign-functions -msse2 -mfpmath=sse -c -o Test_ext2_records.o Test_ext2_records.c +g++ -shared -Xlinker --export-all-symbols -o Test_ext2.dll Test_ext2.o Test_ext2_records.o -lext2 -I"c:/dev/OpenModelica/build/include/omc" -O0 -falign-functions -msse2 -mfpmath=sse -L"c:/dev/OpenModelica/build/lib/omc" -Wl,-rpath,'c:/dev/OpenModelica/build/lib/omc' -lOpenModelicaRuntimeC -lregex -lexpat -lgc -lpthread -fopenmp -loleaut32 -static-libgcc -luuid -loleaut32 -lole32 -lws2_32 -lsundials_kinsol -lsundials_nvecserial -lipopt -lcoinmumps -lcoinmetis -lpthread -lm -lgfortranbegin -lgfortran -lmingw32 -lgcc_eh -lmoldname -lmingwex -lmsvcrt -luser32 -lkernel32 -ladvapi32 -lshell32 -llapack-mingw -ltmglib-mingw -lblas-mingw -lf2c -lm +c:/omdev/tools/mingw/bin/../lib/gcc/mingw32/4.4.0/../../../../mingw32/bin/ld.exe: cannot find -lext2 +collect2: ld returned 1 exit status +\tools\MinGW\bin\mingw32-make[3]: *** [Test_ext2] Error 1 +\tools\MinGW\bin\mingw32-make[3]: Leaving directory `c:/dev/OpenModelica/testsuite/flattening/modelica/mosfiles' + +" 42.3 "" -42.4 -"" + +"Error: Error building simulator. Build log: \tools\MinGW\bin\mingw32-make[3]: Entering directory `c:/dev/OpenModelica/testsuite/flattening/modelica/mosfiles' +gcc -I"c:/dev/OpenModelica/build/include/omc" -O0 -falign-functions -msse2 -mfpmath=sse -c -o Test_ext4.o Test_ext4.c +In file included from Test_ext4.c:1: +Test_ext4.h:26:18: error: ext4.c: No such file or directory +\tools\MinGW\bin\mingw32-make[3]: *** [Test_ext4] Error 1 +\tools\MinGW\bin\mingw32-make[3]: Leaving directory `c:/dev/OpenModelica/testsuite/flattening/modelica/mosfiles' + +" Equation mismatch: omc-diff says: Line 6: Text differs: expected: "flattening/modelica/mosfiles/TestLibrary" got: "c:\\dev\\OpenModelica\\testsuite\\flattening\\modelica\\mosfiles\\TestLibrary" + Integer Multiplication Overflow ... equation mismatch [time:0] ==== Log /tmp/omc-rtest-build/flattening/modelica/mosfiles/log-IntMulOverflow.mos 62832 1130572555.0 23422 96550683684.0 65 4225 -670028996 5 25 125.0 146.8273678860024 32414322 12314121 {{32414322,32414322},{32414322,32414322}} {{12314121,12314121},{12314121,12314121}} {{798307766481924.0,798307766481924.0},{798307766481924.0,798307766481924.0}} Equation mismatch: diff says: --- /tmp/omc-rtest-build/flattening/modelica/mosfiles/equations-expected 2013-10-09 16:56:48 +0200 +++ /tmp/omc-rtest-build/flattening/modelica/mosfiles/equations-got 2013-10-09 16:56:48 +0200 @@ -1,16 +1,16 @@ 62832 1130572555.0 23422 -96550683684 +96550683684.0 65 4225 -1477454652.0 +-670028996 5 25 125.0 -146.827367886002 +146.8273678860024 32414322 12314121 {{32414322,32414322},{32414322,32414322}} {{12314121,12314121},{12314121,12314121}} -{{798307766481924,798307766481924},{798307766481924,798307766481924}} +{{798307766481924.0,798307766481924.0},{798307766481924.0,798307766481924.0}} Equation mismatch: omc-diff says: Line 7: Real 1477454652.0 != -670028996 eps: 0.005000, actual diff: 2147483648.000000 == 2 out of 42 tests failed [flattening/modelica/mosfiles, time: 69] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/modelica/mosfiles' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/openmodelica/fmi/CoSimulationStandAlone' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build + externalFMUs ... equation mismatch [time:7] ==== Log /tmp/omc-rtest-build/openmodelica/fmi/CoSimulationStandAlone/log-ExternalFMUs.mos "bouncingBall_cs_st_FMU.mo" true "" record SimulationResult resultFile = "bouncingBall_cs_st_FMU_res.mat", simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 0.0001, method = 'dassl', fileNamePrefix = 'bouncingBall_cs_st_FMU', options = '', outputFormat = 'mat', variableFilter = '.*', measureTime = false, cflags = '', simflags = ''", messages = "[INFO][bouncingBall] [log][FMU status:OK] fmiSetDebugLogging: loggingOn=0 " end SimulationResult; 0.999829306 0.20797760331998377 NaN "vanDerPol_cs_st_FMU.mo" true "" record SimulationResult resultFile = "vanDerPol_cs_st_FMU_res.mat", simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 0.0001, method = 'dassl', fileNamePrefix = 'vanDerPol_cs_st_FMU', options = '', outputFormat = 'mat', variableFilter = '.*', measureTime = false, cflags = '', simflags = ''", messages = "[INFO][vanDerPol] [log][FMU status:OK] fmiSetDebugLogging: loggingOn=0 " end SimulationResult; 1.9999653941904925 1.5018966016880981 -0.01189611345592383 -0.7844223730630429 Equation mismatch: diff says: --- /tmp/omc-rtest-build/openmodelica/fmi/CoSimulationStandAlone/equations-expected 2013-10-09 16:58:13 +0200 +++ /tmp/omc-rtest-build/openmodelica/fmi/CoSimulationStandAlone/equations-got 2013-10-09 16:58:20 +0200 @@ -1,25 +1,25 @@ "bouncingBall_cs_st_FMU.mo" true "" record SimulationResult resultFile = "bouncingBall_cs_st_FMU_res.mat", -simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'bouncingBall_cs_st_FMU', storeInTemp = false, noClean = false, options = '', outputFormat = 'mat', variableFilter = '.*', measureTime = false, cflags = '', simflags = ''", -messages = "fmiStatus = 0; bouncingBall (log): fmiSetDebugLogging: loggingOn=0 +simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 0.0001, method = 'dassl', fileNamePrefix = 'bouncingBall_cs_st_FMU', options = '', outputFormat = 'mat', variableFilter = '.*', measureTime = false, cflags = '', simflags = ''", +messages = "[INFO][bouncingBall] [log][FMU status:OK] fmiSetDebugLogging: loggingOn=0 " end SimulationResult; -0.9989331625 -9.91299113806439e-05 +0.999829306 +0.20797760331998377 NaN "vanDerPol_cs_st_FMU.mo" true "" record SimulationResult resultFile = "vanDerPol_cs_st_FMU_res.mat", -simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'vanDerPol_cs_st_FMU', storeInTemp = false, noClean = false, options = '', outputFormat = 'mat', variableFilter = '.*', measureTime = false, cflags = '', simflags = ''", -messages = "fmiStatus = 0; vanDerPol (log): fmiSetDebugLogging: loggingOn=0 +simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 0.0001, method = 'dassl', fileNamePrefix = 'vanDerPol_cs_st_FMU', options = '', outputFormat = 'mat', variableFilter = '.*', measureTime = false, cflags = '', simflags = ''", +messages = "[INFO][vanDerPol] [log][FMU status:OK] fmiSetDebugLogging: loggingOn=0 " end SimulationResult; -1.99978551801558 --0.894483565115658 --0.0293555381587737 --2.67301665705339 +1.9999653941904925 +1.5018966016880981 +-0.01189611345592383 +-0.7844223730630429 Equation mismatch: omc-diff says: Line 6: Text differs: expected: , method = 'dassl', fileNamePrefix = 'bouncingBall_cs_st_FMU', storeInTemp = false, noClean = false, options = '', outputFormat = 'mat', variableFilter = '.*', measureTime = false, cflags = '', simflags = ''", got: , method = 'dassl', fileNamePrefix = 'bouncingBall_cs_st_FMU', options = '', outputFormat = 'mat', variableFilter = '.*', measureTime = false, cflags = '', simflags = ''", == 1 out of 1 tests failed [openmodelica/fmi/CoSimulationStandAlone, time: 0] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/openmodelica/fmi/CoSimulationStandAlone' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/openmodelica/fmi/ModelExchange' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build + TanksConnectedPI ... execution failed ==== Log /tmp/omc-rtest-build/openmodelica/fmi/ModelExchange/log-TanksConnectedPI.mos true "SimCode: The model TanksConnectedPI has been translated to FMU" "" false record SimulationResult resultFile = "", simulationOptions = "startTime = 0.0, stopTime = 210.0, numberOfIntervals = 250, tolerance = 0.00001, method = 'dassl', fileNamePrefix = 'TanksConnectedPI_me_FMU', options = '', outputFormat = 'mat', variableFilter = '.*', measureTime = false, cflags = '', simflags = ''", messages = "Simulation Failed. Model: TanksConnectedPI_me_FMU does not exist! Please load it first before simulation." end SimulationResult; Error processing file: TanksConnectedPI.mos Error: module = Could not load the FMI function 'fmiGetModelTypesPlatform'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiInstantiateModel'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiFreeModelInstance'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiSetTime'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiSetContinuousStates'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiCompletedIntegratorStep'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiInitialize'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiGetDerivatives'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiGetEventIndicators'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiEventUpdate'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiGetContinuousStates'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiGetNominalContinuousStates'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiGetStateValueReferences'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiTerminate'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiGetVersion'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiSetDebugLogging'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiSetReal'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiSetInteger'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiSetBoolean'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiSetString'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiGetReal'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiGetInteger'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiGetBoolean'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiGetString'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: Could not create the DLL loading mechanism(C-API). # Error encountered! Exiting... # Please check the error message and the flags. Execution failed! + Modelica_Mechanics_MultiBody_Examples_Elementary_Pendulum ... equation mismatch [time:13] ==== Log /tmp/omc-rtest-build/openmodelica/fmi/ModelExchange/log-Modelica_Mechanics_MultiBody_Examples_Elementary_Pendulum.mos true "SimCode: The model Modelica.Mechanics.MultiBody.Examples.Elementary.Pendulum has been translated to FMU" "" "" "Error: Could not create the DLL loading mechanism(C-API). " false "" record SimulationResult resultFile = "", simulationOptions = "startTime = 0.0, stopTime = 3.0, numberOfIntervals = 500, tolerance = 0.000001, method = 'dassl', fileNamePrefix = 'Modelica_Mechanics_MultiBody_Examples_Elementary_Pendulum_me_FMU', options = '', outputFormat = 'mat', variableFilter = '.*', measureTime = false, cflags = '', simflags = ''", messages = "Simulation Failed. Model: Modelica_Mechanics_MultiBody_Examples_Elementary_Pendulum_me_FMU does not exist! Please load it first before simulation." end SimulationResult; Equation mismatch: diff says: --- /tmp/omc-rtest-build/openmodelica/fmi/ModelExchange/equations-expected 2013-10-09 16:59:06 +0200 +++ /tmp/omc-rtest-build/openmodelica/fmi/ModelExchange/equations-got 2013-10-09 16:59:19 +0200 @@ -1,16 +1,17 @@ true "SimCode: The model Modelica.Mechanics.MultiBody.Examples.Elementary.Pendulum has been translated to FMU" "" -"Modelica_Mechanics_MultiBody_Examples_Elementary_Pendulum_me_FMU.mo" "" -true +"Error: Could not create the DLL loading mechanism(C-API). +" +false "" record SimulationResult -resultFile = "Modelica_Mechanics_MultiBody_Examples_Elementary_Pendulum_me_FMU_res.mat", +resultFile = "", simulationOptions = "startTime = 0.0, stopTime = 3.0, numberOfIntervals = 500, tolerance = 0.000001, method = 'dassl', fileNamePrefix = 'Modelica_Mechanics_MultiBody_Examples_Elementary_Pendulum_me_FMU', options = '', outputFormat = 'mat', variableFilter = '.*', measureTime = false, cflags = '', simflags = ''", -messages = "" +messages = "Simulation Failed. Model: Modelica_Mechanics_MultiBody_Examples_Elementary_Pendulum_me_FMU does not exist! Please load it first before simulation." end SimulationResult; -0.0 --2.580150841078526 --1.5776030535837853 --0.8529875495514502 + + + + Equation mismatch: omc-diff says: Line 4: Text differs: expected: "Modelica_Mechanics_MultiBody_Examples_Elementary_Pendulum_me_FMU.mo" got: "" + Modelica_Mechanics_MultiBody_Examples_Elementary_DoublePendulum ... equation mismatch [time:16] ==== Log /tmp/omc-rtest-build/openmodelica/fmi/ModelExchange/log-Modelica_Mechanics_MultiBody_Examples_Elementary_DoublePendulum.mos true "SimCode: The model Modelica.Mechanics.MultiBody.Examples.Elementary.DoublePendulum has been translated to FMU" "" "" "Error: Could not create the DLL loading mechanism(C-API). " false "" record SimulationResult resultFile = "", simulationOptions = "startTime = 0.0, stopTime = 3.0, numberOfIntervals = 500, tolerance = 0.000001, method = 'dassl', fileNamePrefix = 'Modelica_Mechanics_MultiBody_Examples_Elementary_DoublePendulum_me_FMU', options = '', outputFormat = 'mat', variableFilter = '.*', measureTime = false, cflags = '', simflags = ''", messages = "Simulation Failed. Model: Modelica_Mechanics_MultiBody_Examples_Elementary_DoublePendulum_me_FMU does not exist! Please load it first before simulation." end SimulationResult; Equation mismatch: diff says: --- /tmp/omc-rtest-build/openmodelica/fmi/ModelExchange/equations-expected 2013-10-09 16:59:19 +0200 +++ /tmp/omc-rtest-build/openmodelica/fmi/ModelExchange/equations-got 2013-10-09 16:59:35 +0200 @@ -1,20 +1,21 @@ true "SimCode: The model Modelica.Mechanics.MultiBody.Examples.Elementary.DoublePendulum has been translated to FMU" "" -"Modelica_Mechanics_MultiBody_Examples_Elementary_DoublePendulum_me_FMU.mo" "" -true +"Error: Could not create the DLL loading mechanism(C-API). +" +false "" record SimulationResult -resultFile = "Modelica_Mechanics_MultiBody_Examples_Elementary_DoublePendulum_me_FMU_res.mat", +resultFile = "", simulationOptions = "startTime = 0.0, stopTime = 3.0, numberOfIntervals = 500, tolerance = 0.000001, method = 'dassl', fileNamePrefix = 'Modelica_Mechanics_MultiBody_Examples_Elementary_DoublePendulum_me_FMU', options = '', outputFormat = 'mat', variableFilter = '.*', measureTime = false, cflags = '', simflags = ''", -messages = "" +messages = "Simulation Failed. Model: Modelica_Mechanics_MultiBody_Examples_Elementary_DoublePendulum_me_FMU does not exist! Please load it first before simulation." end SimulationResult; -0.0 --2.9151134877484743 --0.036932304869208676 --2.315833281802642 -0.0 --0.5164246962637027 --0.9041244419923411 --1.7364994721877753 + + + + + + + + Equation mismatch: omc-diff says: Line 4: Text differs: expected: "Modelica_Mechanics_MultiBody_Examples_Elementary_DoublePendulum_me_FMU.mo" got: "" + JuliansBib ... equation mismatch [time:15] ==== Log /tmp/omc-rtest-build/openmodelica/fmi/ModelExchange/log-JuliansBib.mos true "" true "" true "" record SimulationResult resultFile = "JuliansBib.Connector_Hebelarm_einfach_res.mat", simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 0.000001, method = 'dassl', fileNamePrefix = 'JuliansBib.Connector_Hebelarm_einfach', options = '', outputFormat = 'mat', variableFilter = '.*', measureTime = false, cflags = '', simflags = ''", messages = "Warning: Variable lever_arm_simple_2D1.ausleger1.actuatedPrismatic1.s out of [min, max] interval: lever_arm_simple_2D1.ausleger1.actuatedPrismatic1.s >= 0.0 has value: -3.60059e-006 Warning: Variable lever_arm_simple_2D1.ausleger1.fixedTranslation.r0[1] out of [min, max] interval: lever_arm_simple_2D1.ausleger1.fixedTranslation.r0[1] >= 0.0 has value: -1.41144 Warning: Variable lever_arm_simple_2D1.ausleger1.fixedTranslation.r0[2] out of [min, max] interval: lever_arm_simple_2D1.ausleger1.fixedTranslation.r0[2] >= 0.0 has value: -0.0885635 " end SimulationResult; "Warning: The initial conditions are not fully specified. Use +d=initialization for more information. Warning: There are iteration variables with default zero start attribute. Use +d=initialization for more information. " 127.20931184722215 -1.4736715754669394 12720.931184722214 -2.525896906857894 0.0000000000000000000000000000000028922348360295672 -0.532690440798713 "SimCode: The model JuliansBib.Connector_Hebelarm_einfach has been translated to FMU" "Warning: The initial conditions are not fully specified. Use +d=initialization for more information. Warning: There are iteration variables with default zero start attribute. Use +d=initialization for more information. " "" "Error: module = Could not load the FMI function 'fmiGetModelTypesPlatform'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiInstantiateModel'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiFreeModelInstance'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiSetTime'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiSetContinuousStates'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiCompletedIntegratorStep'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiInitialize'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiGetDerivatives'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiGetEventIndicators'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiEventUpdate'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiGetContinuousStates'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiGetNominalContinuousStates'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiGetStateValueReferences'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiTerminate'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiGetVersion'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiSetDebugLogging'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiSetReal'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiSetInteger'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiSetBoolean'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiSetString'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiGetReal'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiGetInteger'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiGetBoolean'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: module = Could not load the FMI function 'fmiGetString'. The specified procedure could not be found. , log level = ERROR: FMICAPI Error: Could not create the DLL loading mechanism(C-API). " false "" record SimulationResult resultFile = "", simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 1000, tolerance = 0.000001, method = 'dassl', fileNamePrefix = 'JuliansBib_Connector_Hebelarm_einfach_me_FMU', options = '', outputFormat = 'mat', variableFilter = '.*', measureTime = false, cflags = '', simflags = ''", messages = "Simulation Failed. Model: JuliansBib_Connector_Hebelarm_einfach_me_FMU does not exist! Please load it first before simulation." end SimulationResult; 127.20931184722215 -1.4736715754669394 12720.931184722214 -2.525896906857894 0.0000000000000000000000000000000028922348360295672 -0.532690440798713 Equation mismatch: diff says: --- /tmp/omc-rtest-build/openmodelica/fmi/ModelExchange/equations-expected 2013-10-09 16:59:36 +0200 +++ /tmp/omc-rtest-build/openmodelica/fmi/ModelExchange/equations-got 2013-10-09 16:59:51 +0200 @@ -5,38 +5,87 @@ true "" record SimulationResult resultFile = "JuliansBib.Connector_Hebelarm_einfach_res.mat", simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 0.000001, method = 'dassl', fileNamePrefix = 'JuliansBib.Connector_Hebelarm_einfach', options = '', outputFormat = 'mat', variableFilter = '.*', measureTime = false, cflags = '', simflags = ''", -messages = "Warning: Variable lever_arm_simple_2D1.ausleger1.actuatedPrismatic1.s out of [min, max] interval: lever_arm_simple_2D1.ausleger1.actuatedPrismatic1.s >= 0.0 has value: -3.60059e-06 +messages = "Warning: Variable lever_arm_simple_2D1.ausleger1.actuatedPrismatic1.s out of [min, max] interval: lever_arm_simple_2D1.ausleger1.actuatedPrismatic1.s >= 0.0 has value: -3.60059e-006 Warning: Variable lever_arm_simple_2D1.ausleger1.fixedTranslation.r0[1] out of [min, max] interval: lever_arm_simple_2D1.ausleger1.fixedTranslation.r0[1] >= 0.0 has value: -1.41144 Warning: Variable lever_arm_simple_2D1.ausleger1.fixedTranslation.r0[2] out of [min, max] interval: lever_arm_simple_2D1.ausleger1.fixedTranslation.r0[2] >= 0.0 has value: -0.0885635 " end SimulationResult; "Warning: The initial conditions are not fully specified. Use +d=initialization for more information. Warning: There are iteration variables with default zero start attribute. Use +d=initialization for more information. " 127.20931184722215 --1.4736715754671947 +-1.4736715754669394 12720.931184722214 --2.525896906858427 +-2.525896906857894 0.0000000000000000000000000000000028922348360295672 --0.5326904407986454 +-0.532690440798713 "SimCode: The model JuliansBib.Connector_Hebelarm_einfach has been translated to FMU" "Warning: The initial conditions are not fully specified. Use +d=initialization for more information. Warning: There are iteration variables with default zero start attribute. Use +d=initialization for more information. " -"JuliansBib_Connector_Hebelarm_einfach_me_FMU.mo" "" -true +"Error: module = Could not load the FMI function 'fmiGetModelTypesPlatform'. The specified procedure could not be found. +, log level = ERROR: FMICAPI +Error: module = Could not load the FMI function 'fmiInstantiateModel'. The specified procedure could not be found. +, log level = ERROR: FMICAPI +Error: module = Could not load the FMI function 'fmiFreeModelInstance'. The specified procedure could not be found. +, log level = ERROR: FMICAPI +Error: module = Could not load the FMI function 'fmiSetTime'. The specified procedure could not be found. +, log level = ERROR: FMICAPI +Error: module = Could not load the FMI function 'fmiSetContinuousStates'. The specified procedure could not be found. +, log level = ERROR: FMICAPI +Error: module = Could not load the FMI function 'fmiCompletedIntegratorStep'. The specified procedure could not be found. +, log level = ERROR: FMICAPI +Error: module = Could not load the FMI function 'fmiInitialize'. The specified procedure could not be found. +, log level = ERROR: FMICAPI +Error: module = Could not load the FMI function 'fmiGetDerivatives'. The specified procedure could not be found. +, log level = ERROR: FMICAPI +Error: module = Could not load the FMI function 'fmiGetEventIndicators'. The specified procedure could not be found. +, log level = ERROR: FMICAPI +Error: module = Could not load the FMI function 'fmiEventUpdate'. The specified procedure could not be found. +, log level = ERROR: FMICAPI +Error: module = Could not load the FMI function 'fmiGetContinuousStates'. The specified procedure could not be found. +, log level = ERROR: FMICAPI +Error: module = Could not load the FMI function 'fmiGetNominalContinuousStates'. The specified procedure could not be found. +, log level = ERROR: FMICAPI +Error: module = Could not load the FMI function 'fmiGetStateValueReferences'. The specified procedure could not be found. +, log level = ERROR: FMICAPI +Error: module = Could not load the FMI function 'fmiTerminate'. The specified procedure could not be found. +, log level = ERROR: FMICAPI +Error: module = Could not load the FMI function 'fmiGetVersion'. The specified procedure could not be found. +, log level = ERROR: FMICAPI +Error: module = Could not load the FMI function 'fmiSetDebugLogging'. The specified procedure could not be found. +, log level = ERROR: FMICAPI +Error: module = Could not load the FMI function 'fmiSetReal'. The specified procedure could not be found. +, log level = ERROR: FMICAPI +Error: module = Could not load the FMI function 'fmiSetInteger'. The specified procedure could not be found. +, log level = ERROR: FMICAPI +Error: module = Could not load the FMI function 'fmiSetBoolean'. The specified procedure could not be found. +, log level = ERROR: FMICAPI +Error: module = Could not load the FMI function 'fmiSetString'. The specified procedure could not be found. +, log level = ERROR: FMICAPI +Error: module = Could not load the FMI function 'fmiGetReal'. The specified procedure could not be found. +, log level = ERROR: FMICAPI +Error: module = Could not load the FMI function 'fmiGetInteger'. The specified procedure could not be found. +, log level = ERROR: FMICAPI +Error: module = Could not load the FMI function 'fmiGetBoolean'. The specified procedure could not be found. +, log level = ERROR: FMICAPI +Error: module = Could not load the FMI function 'fmiGetString'. The specified procedure could not be found. +, log level = ERROR: FMICAPI +Error: Could not create the DLL loading mechanism(C-API). +" +false "" record SimulationResult -resultFile = "JuliansBib_Connector_Hebelarm_einfach_me_FMU_res.mat", +resultFile = "", simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 1000, tolerance = 0.000001, method = 'dassl', fileNamePrefix = 'JuliansBib_Connector_Hebelarm_einfach_me_FMU', options = '', outputFormat = 'mat', variableFilter = '.*', measureTime = false, cflags = '', simflags = ''", -messages = "" +messages = "Simulation Failed. Model: JuliansBib_Connector_Hebelarm_einfach_me_FMU does not exist! Please load it first before simulation." end SimulationResult; 127.20931184722215 --1.4736696169970198 +-1.4736715754669394 12720.931184722214 --2.5257671056017506 +-2.525896906857894 0.0000000000000000000000000000000028922348360295672 --0.532692066433753 +-0.532690440798713 Equation mismatch: omc-diff says: Line 28: Text differs: expected: "JuliansBib_Connector_Hebelarm_einfach_me_FMU.mo" got: "" == 4 out of 10 tests failed [openmodelica/fmi/ModelExchange, time: 118] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/openmodelica/fmi/ModelExchange' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/libraries/3rdParty/HumMod' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 2 tests failed [flattening/libraries/3rdParty/HumMod, time: 290] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/libraries/3rdParty/HumMod' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/openmodelica/interactive-API' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 34 tests failed [openmodelica/interactive-API, time: 88] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/openmodelica/interactive-API' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/openmodelica/interactive-simulation' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build + Interactive Simulation Testing ... equation mismatch [time:28] ==== Log /tmp/omc-rtest-build/openmodelica/interactive-simulation/log-runInteractiveSimulation.mos true "" true {"TwoTanks.TanksConnectedPI","TwoTanks.TanksConnectedPI_init.xml"} "Warning: The initial conditions are not fully specified. Use +d=initialization for more information. " 2 0 0 "Trace of the client: " "Control server on: 127.0.0.1:10500 Transfer server on: 127.0.0.1:10502 Enter operation to be sent to server: Message to be send: setcontrolclienturl#1#127.0.0.1#10500#end Enter operation to be sent to server: Command to delay the client for: 2 seconds. Server recieved message: done#1#end End delay of 2 seconds. Enter operation to be sent to server: Message to be send: settransferclienturl#2#127.0.0.1#10502#end Enter operation to be sent to server: Command to delay the client for: 2 seconds. Server recieved message: done#2#end End delay of 2 seconds. Enter operation to be sent to server: Message to be send: setfilter#3#tank1.h#source.flowLevel#end Enter operation to be sent to server: Command to delay the client for: 2 seconds. Server recieved message: done#3#end End delay of 2 seconds. Enter operation to be sent to server: Message to be send: start#4#end Enter operation to be sent to server: Command to delay the client for: 1 seconds. Server recieved message: done#4#end End delay of 1 seconds. Enter operation to be sent to server: Message to be send: pause#5#end Enter operation to be sent to server: Command to delay the client for: 1 seconds. Server recieved message: done#5#end End delay of 1 seconds. Enter operation to be sent to server: Message to be send: changevalue#6#0.1#source.flowLevel=0.0004#end Enter operation to be sent to server: Command to delay the client for: 1 seconds. Server recieved message: done#6#end End delay of 1 seconds. Enter operation to be sent to server: Message to be send: start#7#end Enter operation to be sent to server: Command to delay the client for: 10 seconds. Server recieved message: done#7#end End delay of 10 seconds. Enter operation to be sent to server: Message to be send: shutdown#8#end Shuting down in 2 seconds .... due to shutdown message: shutdown#8#end " "Trace of server (simulation): " "startInteractiveSimulation: Message send: done#1#end Creating producers and consumers! Message send: done#2#end Message send: done#3#end Message send: done#4#end Message send: done#5#end Message send: done#6#end Message send: done#7#end Message send: done#8#end simulation finished! " Equation mismatch: diff says: --- /tmp/omc-rtest-build/openmodelica/interactive-simulation/equations-expected 2013-10-09 16:20:45 +0200 +++ /tmp/omc-rtest-build/openmodelica/interactive-simulation/equations-got 2013-10-09 16:21:13 +0200 @@ -1,11 +1,12 @@ true "" true {"TwoTanks.TanksConnectedPI","TwoTanks.TanksConnectedPI_init.xml"} -"" -0 +"Warning: The initial conditions are not fully specified. Use +d=initialization for more information. +" +2 0 0 "Trace of the client: " "Control server on: 127.0.0.1:10500 Transfer server on: 127.0.0.1:10502 @@ -64,6 +65,7 @@ Message send: done#4#end Message send: done#5#end Message send: done#6#end Message send: done#7#end Message send: done#8#end +simulation finished! " Equation mismatch: omc-diff says: Line 5: Text differs: expected: "" got: "Warning: The initial conditions are not fully specified. Use +d=initialization for more information. == 1 out of 1 tests failed [openmodelica/interactive-simulation, time: 0] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/openmodelica/interactive-simulation' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/openmodelica/linearization' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 13 tests failed [openmodelica/linearization, time: 84] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/openmodelica/linearization' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/metamodelica/meta' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 103 tests failed [metamodelica/meta, time: 231] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/metamodelica/meta' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/metamodelica/MetaModelicaDev' == 10 failed == 0 out of 11 tests failed [MetaModelica Course, time: 54] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/metamodelica/MetaModelicaDev' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/openmodelica/modelicaML' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 4 tests failed [openmodelica/modelicaML, time: 17] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/openmodelica/modelicaML' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/modelica/algorithms-functions' Running tests: == 0 out of 102 tests failed [flattening/modelica/algorithms-functions, time: 71] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/modelica/algorithms-functions' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/modelica/arrays' Running tests: == 0 out of 139 tests failed [flattening/modelica/arrays, time: 102] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/modelica/arrays' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/modelica/asserts' Running tests: == 0 out of 5 tests failed [flattening/modelica/asserts, time: 3] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/modelica/asserts' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/modelica/blocks' Running tests: == 0 out of 4 tests failed [flattening/modelica/blocks, time: 2] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/modelica/blocks' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/modelica/built-in-functions' Running tests: == 0 out of 67 tests failed [flattening/modelica/built-in-functions, time: 39] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/modelica/built-in-functions' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/modelica/connectors' Running tests: == 0 out of 57 tests failed [flattening/modelica/connectors, time: 43] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/modelica/connectors' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/modelica/declarations' Running tests: == 0 out of 64 tests failed [flattening/modelica/declarations, time: 36] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/modelica/declarations' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/modelica/enums' Running tests: == 0 out of 22 tests failed [flattening/modelica/enums, time: 12] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/modelica/enums' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/modelica/equations' Running tests: == 0 out of 48 tests failed [flattening/modelica/equations, time: 33] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/modelica/equations' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/modelica/extends' Running tests: == 0 out of 40 tests failed [flattening/modelica/extends, time: 22] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/modelica/extends' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/modelica/external-functions' Running tests: == 0 out of 14 tests failed [flattening/modelica/external-functions, time: 21] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/modelica/external-functions' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/modelica/modification' Running tests: == 0 out of 38 tests failed [flattening/modelica/modification, time: 21] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/modelica/modification' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/modelica/operators' Running tests: == 0 out of 43 tests failed [flattening/modelica/operators, time: 24] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/modelica/operators' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/modelica/others' Running tests... == 0 out of 92 tests failed [flattening/modelica/others, time: 65] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/modelica/others' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/modelica/packages' Running tests: == 0 out of 20 tests failed [flattening/modelica/packages, time: 12] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/modelica/packages' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/modelica/scoping' Running tests: == 0 out of 20 tests failed [flattening/modelica/scoping, time: 11] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/modelica/scoping' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/modelica/types' Running tests: == 0 out of 25 tests failed [flattening/modelica/types, time: 14] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/modelica/types' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/libraries/msl22/modelicaAdditions' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 6 tests failed [flattening/libraries/msl22/modelicaAdditions, time: 26] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/libraries/msl22/modelicaAdditions' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/simulation/libraries/msl22/Electrical' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 4 tests failed [simulation/libraries/msl22/Electrical, time: 26] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/simulation/libraries/msl22/Electrical' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/libraries/msl22' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 67 tests failed [flattening/libraries/msl22, time: 214] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/libraries/msl22' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/simulation/libraries/msl22/Mechanics' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 8 tests failed [simulation/libraries/msl22/Mechanics, time: 48] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/simulation/libraries/msl22/Mechanics' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/libraries/msl31' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 14 tests failed [flattening/libraries/msl31, time: 219] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/libraries/msl31' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/libraries/msl31/fluid' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 45 tests failed [flattening/libraries/msl31/fluid, time: 390] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/libraries/msl31/fluid' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/libraries/msl31/media' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 36 tests failed [flattening/libraries/msl31/media, time: 334] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/libraries/msl31/media' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/simulation/libraries/msl31/media' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 25 tests failed [simulation/libraries/msl31/media, time: 283] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/simulation/libraries/msl31/media' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/simulation/libraries/msl31' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 79 tests failed [simulation/libraries/msl31, time: 797] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/simulation/libraries/msl31' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/libraries/msl32' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 5 tests failed [flattening/libraries/msl32, time: 46] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/libraries/msl32' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/simulation/libraries/msl32' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build + Modelica.Fluid.Examples.InverseParameterization ... equation mismatch [time:69] ==== Log /tmp/omc-rtest-build/simulation/libraries/msl32/log-Modelica.Fluid.Examples.InverseParameterization.mos "true true true " "" OpenModelicaModelTesting.Kind.VerifiedSimulation Modelica.Fluid.Examples.InverseParameterization {"source.ports[1].m_flow","source.ports[1].p","source.ports[1].h_outflow","sink.ports[1].m_flow","sink.ports[1].p","sink.ports[1].h_outflow","sink1.ports[1].m_flow","sink1.ports[1].p","sink1.ports[1].h_outflow","sink2.ports[1].m_flow","sink2.ports[1].p","sink2.ports[1].h_outflow"} Simulation options: startTime = 0.0, stopTime = 10.0, numberOfIntervals = 10000, tolerance = 0.000001, method = 'dassl', fileNamePrefix = 'Modelica.Fluid.Examples.InverseParameterization', options = '', outputFormat = 'mat', variableFilter = '.*', measureTime = false, cflags = '', simflags = '' Result file: Modelica.Fluid.Examples.InverseParameterization_res.mat Messages: stdout | warning | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS Files Equal! [lib/omlibrary/Modelica 3.2.1/Fluid/Interfaces.mo:740:9-745:39:writable] Notification: From here: [lib/omlibrary/Modelica 3.2.1/Fluid/Interfaces.mo:332:3-334:69:writable] Warning: Inherited elements are not identical: bug: https://trac.modelica.org/Modelica/ticket/627 first: Medium.MassFlowRate m_flow(min = if allowFlowReversal then -Modelica.Constants.inf else 0, start = m_flow_start, stateSelect = if momentumDynamics == Modelica.Fluid.Types.Dynamics.SteadyState then StateSelect.default else StateSelect.prefer) second: Medium.MassFlowRate m_flow(min = if allowFlowReversal then -Modelica.Constants.inf else 0, start = m_flow_start) Continue .... [lib/omlibrary/Modelica 3.2.1/Fluid/Machines.mo:144:13-144:57:writable] Error: Variable V_flow_op not found in scope Modelica.Fluid.Machines.ControlledPump. "true " "" Equation mismatch: diff says: --- /tmp/omc-rtest-build/simulation/libraries/msl32/equations-expected 2013-10-09 16:42:46 +0200 +++ /tmp/omc-rtest-build/simulation/libraries/msl32/equations-got 2013-10-09 16:43:55 +0200 @@ -170,10 +170,18 @@ | | | | | For more information simulate with -lv LOG_NLS | | | | | While solving non-linear system an assert was called. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS +| | | | | While solving non-linear system an assert was called. +| | | | | The non-linear solver tries to solve the problem that could take some time. +| | | | | It could help to provide better start-values for the iteration variables. +| | | | | For more information simulate with -lv LOG_NLS +| | | | | While solving non-linear system an assert was called. +| | | | | The non-linear solver tries to solve the problem that could take some time. +| | | | | It could help to provide better start-values for the iteration variables. +| | | | | For more information simulate with -lv LOG_NLS Files Equal! [lib/omlibrary/Modelica 3.2.1/Fluid/Interfaces.mo:740:9-745:39:writable] Notification: From here: [lib/omlibrary/Modelica 3.2.1/Fluid/Interfaces.mo:332:3-334:69:writable] Warning: Inherited elements are not identical: bug: https://trac.modelica.org/Modelica/ticket/627 first: Medium.MassFlowRate m_flow(min = if allowFlowReversal then -Modelica.Constants.inf else 0, start = m_flow_start, stateSelect = if momentumDynamics == Modelica.Fluid.Types.Dynamics.SteadyState then StateSelect.default else StateSelect.prefer) Equation mismatch: omc-diff says: Line 175: Lexical token differs: expected: got: | | | | | While solving non == 1 out of 261 tests failed [simulation/libraries/msl32, time: 3768] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/simulation/libraries/msl32' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/openmodelica/cppruntime/libraries/msl32' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 65 tests failed [openmodelica/cppruntime/libraries/msl32, time: 1662] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/openmodelica/cppruntime/libraries/msl32' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/libraries/msl31/multibody' make -C elementary -f Makefile test > elementary.log make -C loops -f Makefile test > loops.log make -C rotational3deffects -f Makefile test > rotational3deffects.log make -C systems -f Makefile test > systems.log make -C checkingModels -f Makefile test > checkingModels.log make[3]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/libraries/msl31/multibody/elementary' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 18 tests failed [flattening/libraries/msl31/multibody/elementary, time: 183] make[3]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/libraries/msl31/multibody/elementary' make[3]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/libraries/msl31/multibody/loops' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 11 tests failed [flattening/libraries/msl31/multibody/loops, time: 194] make[3]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/libraries/msl31/multibody/loops' make[3]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/libraries/msl31/multibody/rotational3deffects' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 4 tests failed [flattening/libraries/msl31/multibody/rotational3deffects, time: 45] make[3]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/libraries/msl31/multibody/rotational3deffects' make[3]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/libraries/msl31/multibody/systems' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 1 tests failed [flattening/libraries/msl31/multibody/systems, time: 22] make[3]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/libraries/msl31/multibody/systems' make[3]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/libraries/msl31/multibody/checkingModels' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 1 tests failed [flattening/libraries/msl31/multibody/checkingModels, time: 12] make[3]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/libraries/msl31/multibody/checkingModels' make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/libraries/msl31/multibody' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/openmodelica/omcc' Running OMCCP... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 1 tests failed [openmodelica/omcc, time: 20] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/openmodelica/omcc' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/openmodelica/cruntime/optimization/basic' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 6 tests failed [openmodelica/cruntime/optimization/basic, time: 38] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/openmodelica/cruntime/optimization/basic' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/openmodelica/parser' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build + IntegerLiterals (32-bit) ... equation mismatch [time:0] ==== Log /tmp/omc-rtest-build/openmodelica/parser/log-IntegerLiterals32.mo [openmodelica/parser/IntegerLiterals32.mo:14:23-14:33:writable] Warning: Modelica only supports 32-bit signed integers! Transforming: 2147483648 into a real [openmodelica/parser/IntegerLiterals32.mo:15:25-15:35:writable] Warning: OpenModelica only supports 31-bit signed integers! Truncating integer: 2147483647 to 1073741823 class IntegerLiterals32 constant Integer i1 = 33; constant Integer i2 = 0; constant Integer i3 = 100; constant Integer i4 = 30030044; constant Real i5 = -2147483648.0; constant Integer i6 = 1073741823; Integer i; equation i = -2; end IntegerLiterals32; Equation mismatch: diff says: --- /tmp/omc-rtest-build/openmodelica/parser/equations-expected 2013-10-09 16:55:04 +0200 +++ /tmp/omc-rtest-build/openmodelica/parser/equations-got 2013-10-09 16:55:04 +0200 @@ -1,7 +1,7 @@ -[IntegerLiterals32.mo:14:23-14:33:writable] Warning: Modelica only supports 32-bit signed integers! Transforming: 2147483648 into a real -[IntegerLiterals32.mo:15:25-15:35:writable] Warning: OpenModelica only supports 31-bit signed integers! Truncating integer: 2147483647 to 1073741823 +[openmodelica/parser/IntegerLiterals32.mo:14:23-14:33:writable] Warning: Modelica only supports 32-bit signed integers! Transforming: 2147483648 into a real +[openmodelica/parser/IntegerLiterals32.mo:15:25-15:35:writable] Warning: OpenModelica only supports 31-bit signed integers! Truncating integer: 2147483647 to 1073741823 class IntegerLiterals32 constant Integer i1 = 33; constant Integer i2 = 0; constant Integer i3 = 100; Equation mismatch: omc-diff says: Line 1: Text differs: expected: [IntegerLiterals got: [openmodelica/parser/IntegerLiterals == 1 out of 40 tests failed [openmodelica/parser, time: 52] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/openmodelica/parser' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/modelica/records' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 31 tests failed [flattening/modelica/records, time: 29] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/modelica/records' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/modelica/redeclare' Running tests... == 0 out of 34 tests failed [flattening/modelica/redeclare, time: 21] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/modelica/redeclare' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/modelica/scodeinst' Running tests... == 0 out of 108 tests failed [flattening/modelica/scodeinst, time: 55] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/modelica/scodeinst' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/libraries/3rdParty/siemens' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 5 tests failed [flattening/libraries/3rdParty/siemens, time: 518] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/libraries/3rdParty/siemens' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/simulation/libraries/3rdParty/siemens' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 2 tests failed [simulation/libraries/3rdParty/siemens, time: 25] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/simulation/libraries/3rdParty/siemens' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/simulation/modelica/linear_system' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 4 tests failed [simulation/modelica/linear_system, time: 33] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/simulation/modelica/linear_system' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/simulation/modelica/algorithms_functions' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 32 tests failed [simulation/modelica/algorithms_functions, time: 144] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/simulation/modelica/algorithms_functions' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/simulation/modelica/arrays' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 31 tests failed [simulation/modelica/arrays, time: 118] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/simulation/modelica/arrays' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/simulation/modelica/asserts' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 8 tests failed [simulation/modelica/asserts, time: 35] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/simulation/modelica/asserts' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/simulation/modelica/built_in_functions' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 13 tests failed [simulation/modelica/built_in_functions, time: 64] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/simulation/modelica/built_in_functions' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/simulation/modelica/connectors' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 11 tests failed [simulation/modelica/connectors, time: 42] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/simulation/modelica/connectors' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/simulation/modelica/declarations' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 3 tests failed [simulation/modelica/declarations, time: 41] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/simulation/modelica/declarations' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/simulation/modelica/enums' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 3 tests failed [simulation/modelica/enums, time: 11] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/simulation/modelica/enums' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/simulation/modelica/equations' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 32 tests failed [simulation/modelica/equations, time: 116] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/simulation/modelica/equations' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/simulation/modelica/events' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 11 tests failed [simulation/modelica/events, time: 44] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/simulation/modelica/events' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/simulation/modelica/external_functions' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 6 tests failed [simulation/modelica/external_functions, time: 32] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/simulation/modelica/external_functions' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/simulation/modelica/indexreduction' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 3 tests failed [simulation/modelica/indexreduction, time: 15] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/simulation/modelica/indexreduction' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/simulation/modelica/inheritances' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 2 tests failed [simulation/modelica/inheritances, time: 8] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/simulation/modelica/inheritances' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/simulation/modelica/japaneselanguage' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build + Bouncing Ball (Quoted identifiers using Japanese UTF-8 characters) ... execution failed ==== Log /tmp/omc-rtest-build/simulation/modelica/japaneselanguage/log-JBouncingBall.mos Error processing file: JBouncingBall.mos [simulation/modelica/japaneselanguage/JBouncingBall.mos:6:11-6:11:writable] Error: Lexer got ''' but failed to recognize the rest: '跳ねる' # Error encountered! Exiting... # Please check the error message and the flags. Execution failed! == 1 out of 1 tests failed [simulation/modelica/japaneselanguage, time: 0] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/simulation/modelica/japaneselanguage' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/simulation/modelica/msl22' Running tests... == 0 out of 33 tests failed [simulation/modelica/msl22, time: 168] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/simulation/modelica/msl22' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/simulation/modelica/nonlinear_system' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 33 tests failed [simulation/modelica/nonlinear_system, time: 130] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/simulation/modelica/nonlinear_system' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/simulation/modelica/others' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 40 tests failed [simulation/modelica/others, time: 169] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/simulation/modelica/others' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/simulation/modelica/packages' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 2 tests failed [simulation/modelica/packages, time: 7] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/simulation/modelica/packages' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/simulation/modelica/records' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 1 tests failed [simulation/modelica/records, time: 6] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/simulation/modelica/records' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/simulation/modelica/solver' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 13 tests failed [simulation/modelica/solver, time: 74] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/simulation/modelica/solver' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/simulation/modelica/types' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 1 tests failed [simulation/modelica/types, time: 0] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/simulation/modelica/types' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/flattening/modelica/streams' Running tests: == 0 out of 10 tests failed [flattening/modelica/streams, time: 8] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/flattening/modelica/streams' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/simulation/modelica/hpcom' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 6 tests failed [simulation/modelica/hpcom, time: 221] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/simulation/modelica/hpcom' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/openmodelica/typed-API' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build + UriLookup ... equation mismatch [time:1] ==== Log /tmp/omc-rtest-build/openmodelica/typed-API/log-UriLookup.mos true "" true "" "c:\\dev\\OpenModelica\\testsuite\\openmodelica\\typed-API\\UriLookup\\A/D.jpeg" "" "c:\\dev\\OpenModelica\\testsuite\\openmodelica\\typed-API\\UriLookup\\A/Resources/Icons/D.jpeg" "" ("","Malformed modelica:// URI path. Package name '', path: '/A.B.C/Resources/Icons/D.jpeg'") "" ("","Could not resolve URI: modelica://X.B.C/D.jpeg") "" ("/tmp/D%20E.jpeg","") "" true "" true "" ("","Unknown URI schema: Modelicax://A.B.C/Resources/Icons/D.jpeg") "" Equation mismatch: diff says: --- /tmp/omc-rtest-build/openmodelica/typed-API/equations-expected 2013-10-09 16:56:53 +0200 +++ /tmp/omc-rtest-build/openmodelica/typed-API/equations-got 2013-10-09 16:56:54 +0200 @@ -1,12 +1,12 @@ true "" true "" -"openmodelica/typed-API/UriLookup/A/D.jpeg" +"c:\\dev\\OpenModelica\\testsuite\\openmodelica\\typed-API\\UriLookup\\A/D.jpeg" "" -"openmodelica/typed-API/UriLookup/A/Resources/Icons/D.jpeg" +"c:\\dev\\OpenModelica\\testsuite\\openmodelica\\typed-API\\UriLookup\\A/Resources/Icons/D.jpeg" "" ("","Malformed modelica:// URI path. Package name '', path: '/A.B.C/Resources/Icons/D.jpeg'") "" ("","Could not resolve URI: modelica://X.B.C/D.jpeg") "" Equation mismatch: omc-diff says: Line 5: Text differs: expected: "openmodelica/typed got: "c:\\dev\\OpenModelica\\testsuite\\openmodelica\\typed == 1 out of 3 tests failed [openmodelica/typed-API, time: 5] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/openmodelica/typed-API' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/openmodelica/uncertainties' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 3 tests failed [openmodelica/uncertainties, time: 28] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/openmodelica/uncertainties' make[2]: Entering directory `/c/dev/OpenModelica/testsuite/openmodelica/xml' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build == 0 out of 1 tests failed [openmodelica/xml, time: 1] make[2]: Leaving directory `/c/dev/OpenModelica/testsuite/openmodelica/xml' make[1]: Leaving directory `/c/dev/OpenModelica/testsuite' make[1]: Entering directory `/c/dev/OpenModelica/testsuite/openmodelica/cruntime/msvc' Running tests... OPENMODELICAHOME= c:\dev\OpenModelica\build + Modelica.Mechanics.MultiBody.Examples.Elementary.DoublePendulum ... equation mismatch [time:15] ==== Log /tmp/omc-rtest-build/openmodelica/cruntime/msvc/log-Modelica.Mechanics.MultiBody.Examples.Elementary.DoublePendulum.mos true true OpenModelicaModelTesting.Kind.VerifiedSimulation Modelica.Mechanics.MultiBody.Examples.Elementary.DoublePendulum "./ReferenceFiles/Modelica.Mechanics.MultiBody.Examples.Elementary.DoublePendulum.mat" 0.0 0.01 0.0001 "mat" {"revolute1.phi","revolute1.w","revolute2.phi","revolute2.w"} Simulation options: startTime = 0.0, stopTime = 3.0, numberOfIntervals = 500, tolerance = 0.000001, method = 'dassl', fileNamePrefix = 'Modelica.Mechanics.MultiBody.Examples.Elementary.DoublePendulum', options = '', outputFormat = 'mat', variableFilter = '.*', measureTime = false, cflags = '', simflags = '' Result file: Modelica.Mechanics.MultiBody.Examples.Elementary.DoublePendulum_res.mat Files Equal! "true " "" Equation mismatch: diff says: --- /tmp/omc-rtest-build/openmodelica/cruntime/msvc/equations-expected 2013-10-09 17:14:43 +0200 +++ /tmp/omc-rtest-build/openmodelica/cruntime/msvc/equations-got 2013-10-09 17:14:58 +0200 @@ -9,10 +9,8 @@ "mat" {"revolute1.phi","revolute1.w","revolute2.phi","revolute2.w"} Simulation options: startTime = 0.0, stopTime = 3.0, numberOfIntervals = 500, tolerance = 0.000001, method = 'dassl', fileNamePrefix = 'Modelica.Mechanics.MultiBody.Examples.Elementary.DoublePendulum', options = '', outputFormat = 'mat', variableFilter = '.*', measureTime = false, cflags = '', simflags = '' Result file: Modelica.Mechanics.MultiBody.Examples.Elementary.DoublePendulum_res.mat Files Equal! -Warning: There are iteration variables with default zero start attribute. Use +d=initialization for more information. - "true " "" Equation mismatch: omc-diff says: Line 14: Text differs: expected: Warning: There are iteration variables with default zero start attribute. Use +d=initialization for more information. got: "true == 1 out of 1 tests failed [openmodelica/cruntime/msvc, time: 16] make[1]: Leaving directory `/c/dev/OpenModelica/testsuite/openmodelica/cruntime/msvc' echo "Successful tests: " Successful tests: cat testsuite/testsuite-trace.txt | grep "... ok" | wc -l 2397 echo "Failed models: " Failed models: cat testsuite/testsuite-trace.txt | grep "==== Log" | wc -l 15 cat testsuite/testsuite-trace.txt | grep "==== Log" ; echo DONE! ==== Log /tmp/omc-rtest-build/openmodelica/bootstrapping/log-DumpTest.mos ==== Log /tmp/omc-rtest-build/openmodelica/bootstrapping/log-UtilTest.mos ==== Log /tmp/omc-rtest-build/flattening/modelica/mosfiles/log-ExternalLibraryFunction.mos ==== Log /tmp/omc-rtest-build/flattening/modelica/mosfiles/log-IntMulOverflow.mos ==== Log /tmp/omc-rtest-build/openmodelica/fmi/CoSimulationStandAlone/log-ExternalFMUs.mos ==== Log /tmp/omc-rtest-build/openmodelica/fmi/ModelExchange/log-TanksConnectedPI.mos ==== Log /tmp/omc-rtest-build/openmodelica/fmi/ModelExchange/log-Modelica_Mechanics_MultiBody_Examples_Elementary_Pendulum.mos ==== Log /tmp/omc-rtest-build/openmodelica/fmi/ModelExchange/log-Modelica_Mechanics_MultiBody_Examples_Elementary_DoublePendulum.mos ==== Log /tmp/omc-rtest-build/openmodelica/fmi/ModelExchange/log-JuliansBib.mos ==== Log /tmp/omc-rtest-build/openmodelica/interactive-simulation/log-runInteractiveSimulation.mos ==== Log /tmp/omc-rtest-build/simulation/libraries/msl32/log-Modelica.Fluid.Examples.InverseParameterization.mos ==== Log /tmp/omc-rtest-build/openmodelica/parser/log-IntegerLiterals32.mo ==== Log /tmp/omc-rtest-build/simulation/modelica/japaneselanguage/log-JBouncingBall.mos ==== Log /tmp/omc-rtest-build/openmodelica/typed-API/log-UriLookup.mos ==== Log /tmp/omc-rtest-build/openmodelica/cruntime/msvc/log-Modelica.Mechanics.MultiBody.Examples.Elementary.DoublePendulum.mos DONE!