This package contains example models to demonstrate the usage of package blocks.
| Name | Description |
|---|---|
| PID_Controller | Demonstrates the usage of a Continuous.LimPID controller |
| Filter | Demonstrates the Continuous.Filter block with various options |
| FilterWithDifferentiation | Demonstrates the use of low pass filters to determine derivatives of filters |
| FilterWithRiseTime | Demonstrates to use the rise time instead of the cut-off frequency to define a filter |
| SlewRateLimiter | Demonstrate usage of Nonlinear.SlewRateLimiter |
| InverseModel | Demonstrates the construction of an inverse model |
| ShowLogicalSources | Demonstrates the usage of logical sources together with their diagram animation |
| LogicalNetwork1 | Demonstrates the usage of logical blocks |
| RealNetwork1 | Demonstrates the usage of blocks from Modelica.Blocks.Math |
| IntegerNetwork1 | Demonstrates the usage of blocks from Modelica.Blocks.MathInteger |
| BooleanNetwork1 | Demonstrates the usage of blocks from Modelica.Blocks.MathBoolean |
| Interaction1 | Demonstrates the usage of blocks from Modelica.Blocks.Interaction.Show |
| BusUsage | Demonstrates the usage of a signal bus |
| Rectifier6pulseFFT | Example of FFT block |
| Rectifier12pulseFFT | Example of FFT block |
| TotalHarmonicDistortion | Calculation of total harmonic distortion of voltage |
| Modulation | Demonstrate amplitude modulation and frequency modulation |
| SinCosEncoder | Evaluation of a sinusoidal encoder |
| CompareSincExpSine | Compare sinc and exponential sine signal |
| DemonstrateSignalExtrema | Test detection of signal extrema |
| DemonstrateContinuousSignalExtrema | Test the ContinuousSignalExtrema block |
| DemoSignalCharacteristic | Demonstrate characteristic values of a signal |
| Noise | Library of examples to demonstrate the usage of package Blocks.Noise |
| BusUsage_Utilities | Utility models and connectors for example Modelica.Blocks.Examples.BusUsage |