All models with dynamic equations provide initialisation support. Set the initOpt parameter to the appropriate value:
| Name | Description |
|---|---|
| Flange | Flange connector for gas flows |
| FlangeA | A-type flange connector for gas flows |
| FlangeB | B-type flange connector for gas flows |
| SourcePressure | Pressure source for gas flows |
| SinkPressure | Pressure sink for gas flows |
| SourceMassFlow | Flow rate source for gas flows |
| SinkMassFlow | Flow rate sink for gas flows |
| ThroughMassFlow | Prescribes the mass flow rate across the component |
| Plenum | Rigid adiabatic volume |
| Header | Header with metal walls for gas flows |
| Mixer | Mixer with metal walls for gas flows |
| Flow1DFV | 1-dimensional fluid flow model for gas (finite volumes) |
| Flow1DFV2w | Same as Flow1DFV with two walls and heat transfer models |
| FlowJoin | Joins two gas flows |
| FlowSplit | Splits a gas flow in two |
| PressDropLin | Linear pressure drop for gas flows |
| PressDrop | Pressure drop for gas flows |
| SensT | Temperature sensor for gas |
| SensT1 | Temperature sensor for gas flows, single port |
| SensW | Mass Flowrate sensor for gas flows |
| SensP | Pressure sensor for gas flows |
| SensQ | Volume Flow Rate sensor for gas flows |
| ValveLin | Valve for gas flows with linear pressure drop |
| Valve | Valve for gas flow |
| f_colebrook | Fanning friction factor for water/steam flows |
| CombustionChamber | Combustion Chamber |
| Compressor | Gas compressor |
| Turbine | Gas Turbine |
| TurbineStodola | Gas Turbine |
| GTunit_ISO | Gas Turbine |
| GTunit | Gas Turbine |
| FanMech | |
| Utility | Utility models |
| BaseClasses | |
| SourceP | Pressure source for gas flows |
| SinkP | Pressure sink for gas flows |
| SourceW | Flowrate source for gas flows |
| SinkW | Flowrate sink for gas flows |
| ThroughW | Prescribes the flow rate across the component |
| Flow1D | 1-dimensional fluid flow model for gas (finite volumes) |