This library contains components to build models of biological municipal
wastewater treatment plants based on the Activated Sludge Model No.3 (ASM3) by the
International Association on Water Quality (IAWQ) [1].
The library currently is structured in following sub-libraries.
- Interfaces (partial ASM3 models and connectors)
- PreClar (primary clarifier models)
- SecClar (several secondary settling tank models)
- Examples (wastewater treatment plant models)
Main Author:
Gerald Reichl
Technische Universitaet Ilmenau
Faculty of Informatics and Automation
Department Dynamics and Simulation of ecological Systems
P.O. Box 10 05 65
98684 Ilmenau
Germany
email: gerald.reichl@tu-ilmenau.de
References:
[1] M. Henze and W.Gujer and T. Mino and. M.v. Loosdrecht: Activated Sludge
Models ASM1, ASM2, ASM2d, and ASM3. IWA Task Group on Mathematical Modelling
for Design and Operation of Biological Wastewater Treatment, 2000.
This package is free software; it can be redistributed and/or modified under the terms of the Modelica license, see the license conditions and the accompanying
disclaimer in the documentation of package Modelica in file "Modelica/package.mo".
Copyright (C) 2002 - 2003, Gerald Reichl
| Name | Description |
|---|---|
| deni | ASM3 denitrification tank |
| nitri | ASM3 nitrification tank |
| SecClarModTakacs | ASM3 Secondary Clarifier Model based on Takacs |
| blower | Blower for the aeration of the nitrification tanks |
| pump | ASM3 wastewater pump |
| FlowSource | Flowsource |
| WWSource | Wastewater source |
| EffluentSink | Receiving water (river) |
| SludgeSink | Wastesludge sink |
| ControlledDivider2 | Controlled flow divider |
| divider2 | Flowdivider |
| mixer2 | Mixer of two ASM3 characterised flows |
| mixer3 | Mixer of 3 ASM3 characterised flows |
| sensor_COD | Ideal sensor to measure chemical oxygen demand (COD) |
| sensor_NH | Ideal sensor to measure ammonium nitrogen |
| sensor_NO | Ideal sensor to measure nitrate nitrogen |
| sensor_O2 | Ideal sensor to measure dissolved oxygen concentration |
| sensor_Q | Ideal sensor to measure the flow rate of an ASM1 wastewater stream |
| sensor_TKN | Ideal TKN and total nitrogen sensor |
| sensor_TSS | Ideal sensor to measure total suspended solids concentration (ASM3) |
| Examples | Demonstration examples of the components of the ASM3 library |
| Interfaces | Connectors and partial ASM3 model for Wastewater Treatment Modelling |
| PreClar | Primary clarifier modelling based on ASM3 |
| SecClar | Library for secondary settling tank modelling based on ASM3 |