.WasteWater.Icons

Icon definitions for the WasteWater library

Information

This package is part of the WasteWater Library and contains
definitions for the graphical layout of components which are
used within the sub-libraries ASM1, ASM2d and ASM3.

Main Author:
   Gerald Reichl
   Technische Universitaet Ilmenau
   Faculty of Informatics and Automation
   Department Dynamics and Simulation of ecological Systems
   P.O. Box 10 05 65
   98684 Ilmenau
   Germany
   email: gerald.reichl@tu-ilmenau.de


This package is free software; it can be redistributed and/or modified under the terms of the Modelica license, see the license conditions and the accompanying
disclaimer in the documentation of package Modelica in file "Modelica/package.mo".

Copyright (C) 2003, Gerald Reichl

Contents

NameDescription
deniIcon for a denitrification tank
nitriIcon for a nitrification tank
preclar1Icon for a dynamic preclarifier tank
preclar2Icon for a static preclarifier tank
precipitationIcon for a precipitation tank
SecClarIcon for a secondary clarifier
SecClarKrebsIcon for a secondary clarifier based on Krebs model
SecClarSimpleIcon for a secondary clarifier based on simple model
blowerIcon for an air blower
pumpIcon for a wastewater pump
FlowSourceIcon for a flow source
WWSourceIcon for a wastewater source
EffluentSinkIcon for a water sink e.g. receiving water
SludgeSinkIcon for a wastewater sink
ControlledDivider2Icon for a controlled divider into 2 flows
divider2Icon for a flow divider into 2 flows
mixer2Icon for a mixer of 2 flows
mixer3Icon for a mixer of 3 flows
sensor_CODIcon for a chemical oxygen demand sensor
sensor_NHIcon for an ammonium nitrogen sensor
sensor_NOIcon for a nitrate nitrogen sensor
sensor_O2Icon for an oxygen sensor
sensor_POIcon for a phosphate sensor
sensor_QIcon for a flow sensor
sensor_TKNIcon for a Kjeldal nitrogen and total nitrogen sensor
sensor_TPIcon for a total phosphorus sensor
sensor_TSSIcon for a total suspended solids sensor

Generated at 2025-12-07T19:14:00Z by OpenModelicaOpenModelica 1.25.7 using GenerateDoc.mos