diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/FCSys 0.2.6/Assemblies.mo" "converted-libraries/.openmodelica/libraries/FCSys 0.2.6/Assemblies.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/FCSys 0.2.6/Assemblies.mo" 2022-03-10 09:57:41.760144603 +0000 +++ "converted-libraries/.openmodelica/libraries/FCSys 0.2.6/Assemblies.mo" 2022-03-10 09:58:08.260147960 +0000 @@ -480,7 +480,7 @@ caCL(subregions(graphite(each inclDL=true, 'e-Transfer'(each fromI= false)), ionomer(H2O(each lambda_IC=13.53))))), redeclare Modelica.Electrical.Analog.Sources.SineCurrent load( - freqHz=0.3, + f =0.3, I=7, offset=4), testConditions(I_an=15*U.A, I_ca=20*U.A)); @@ -544,7 +544,7 @@ stateSelect=StateSelect.always, fixed=true))); - output Modelica.SIunits.Voltage w_V=load.v "Potential in volts"; + output Modelica.Units.SI.Voltage w_V=load.v "Potential in volts"; equation der(load.i) = 0 "Current is a dummy state -- only for linear analysis."; diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/FCSys 0.2.6/Blocks.mo" "converted-libraries/.openmodelica/libraries/FCSys 0.2.6/Blocks.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/FCSys 0.2.6/Blocks.mo" 2022-03-10 09:57:41.760144603 +0000 +++ "converted-libraries/.openmodelica/libraries/FCSys 0.2.6/Blocks.mo" 2022-03-10 09:58:07.496147863 +0000 @@ -56,7 +56,7 @@ extends Partial; replaceable function f = U.from_degC constrainedby - Modelica.SIunits.Conversions.ConversionIcon "Conversion function" + Modelica.Units.Icons.Conversion "Conversion function" annotation (__Dymola_choicesFromPackage=true); equation diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/FCSys 0.2.6/Chemistry.mo" "converted-libraries/.openmodelica/libraries/FCSys 0.2.6/Chemistry.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/FCSys 0.2.6/Chemistry.mo" 2022-03-10 09:57:41.760144603 +0000 +++ "converted-libraries/.openmodelica/libraries/FCSys 0.2.6/Chemistry.mo" 2022-03-10 09:58:07.292147838 +0000 @@ -30,7 +30,7 @@ inclTransZ=false, chemical(redeclare constant Integer n_trans=1), redeclare Modelica.Blocks.Sources.Sine set( - freqHz=1, + f =1, amplitude=100*U.A, phase=1.5707963267949)) annotation (Placement(transformation( extent={{-10,-10},{10,10}}, diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/FCSys 0.2.6/Conditions.mo" "converted-libraries/.openmodelica/libraries/FCSys 0.2.6/Conditions.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/FCSys 0.2.6/Conditions.mo" 2022-03-10 09:57:41.760144603 +0000 +++ "converted-libraries/.openmodelica/libraries/FCSys 0.2.6/Conditions.mo" 2022-03-10 09:58:06.944147794 +0000 @@ -1794,7 +1794,7 @@ annotation (Placement(transformation(extent={{-50,-10},{-30,10}}), iconTransformation(extent={{-50,-10},{-30,10}}))); - Modelica.SIunits.MassFraction X[MixtureMedium.nX] + Modelica.Units.SI.MassFraction X[MixtureMedium.nX] "Mass fractions within the mixture"; equation @@ -1836,7 +1836,7 @@ Modelica.Media.IdealGases.Common.FluidData.H2O}, substanceNames={"H2","H2O"}, reference_X=fill(1/nX, nX), - referenceChoice=Modelica.Media.Interfaces.PartialMedium.Choices.ReferenceEnthalpy.ZeroAt25C, + referenceChoice=Modelica.Media.Interfaces.Choices.ReferenceEnthalpy.ZeroAt25C, excludeEnthalpyOfFormation=false); @@ -1856,7 +1856,7 @@ substanceNames={"H2O","N2","O2"}, reference_X=fill(1/nX, nX), - referenceChoice=Modelica.Media.Interfaces.PartialMedium.Choices.ReferenceEnthalpy.ZeroAt25C, + referenceChoice=Modelica.Media.Interfaces.Choices.ReferenceEnthalpy.ZeroAt25C, excludeEnthalpyOfFormation=false); diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/FCSys 0.2.6/Subregions.mo" "converted-libraries/.openmodelica/libraries/FCSys 0.2.6/Subregions.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/FCSys 0.2.6/Subregions.mo" 2022-03-10 09:57:41.772144605 +0000 +++ "converted-libraries/.openmodelica/libraries/FCSys 0.2.6/Subregions.mo" 2022-03-10 09:58:01.876147151 +0000 @@ -587,7 +587,7 @@ redeclare Modelica.Blocks.Sources.Sine materialSet( amplitude=0.2*Vdot_large, offset=Vdot_large, - freqHz=1), +f =1), redeclare function materialSpec = Conditions.ByConnector.Boundary.Single.Material.volumeRate ( redeclare package Data = FCSys.Characteristics.H2O.Liquid), diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/FCSys 0.2.6/Units.mo" "converted-libraries/.openmodelica/libraries/FCSys 0.2.6/Units.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/FCSys 0.2.6/Units.mo" 2022-03-10 09:57:41.772144605 +0000 +++ "converted-libraries/.openmodelica/libraries/FCSys 0.2.6/Units.mo" 2022-03-10 09:58:00.916147030 +0000 @@ -1258,7 +1258,7 @@ function from_degC "Convert from temperature in degree Celsius to temperature as a quantity" - extends Modelica.SIunits.Icons.Conversion; + extends Modelica.Units.Icons.Conversion; input Real T_degC "Temperature in degree Celsius"; output Q.TemperatureAbsolute T "Thermodynamic temperature"; @@ -1270,7 +1270,7 @@ function to_degC "Convert from temperature as a quantity to temperature in degree Celsius" - extends Modelica.SIunits.Icons.Conversion; + extends Modelica.Units.Icons.Conversion; input Q.TemperatureAbsolute T "Thermodynamic temperature"; output Real T_degC "Temperature in degree Celsius"; @@ -1282,7 +1282,7 @@ function from_kPag "Convert from gauge pressure in kilopascals to absolute pressure as a quantity" - extends Modelica.SIunits.Icons.Conversion; + extends Modelica.Units.Icons.Conversion; input Real p_kPag "Gauge pressure in kilopascals"; output Q.PressureAbsolute p "Absolute pressure"; @@ -1294,7 +1294,7 @@ function to_kPag "Convert from absolute pressure as a quantity to gauge pressure in kilopascals" - extends Modelica.SIunits.Icons.Conversion; + extends Modelica.Units.Icons.Conversion; input Q.PressureAbsolute p "Absolute pressure"; output Real p_kPag "Gauge pressure in kilopascals"; diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/FCSys 0.2.6/openmodelica.metadata.json" "converted-libraries/.openmodelica/libraries/FCSys 0.2.6/openmodelica.metadata.json" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/FCSys 0.2.6/openmodelica.metadata.json" 2022-03-10 09:57:41.792144607 +0000 +++ "converted-libraries/.openmodelica/libraries/FCSys 0.2.6/openmodelica.metadata.json" 2022-03-10 09:58:08.300147965 +0000 @@ -1 +1 @@ -{"path":"FCSys 0.2.6", "sha":"cb4b17f34313b9d8f2d4223d5365684b4dc1ab65", "support":"obsolete", "uses":{"Modelica":"3.2.1"}, "version":"0.2.6", "zipfile":"https://github.com/kdavies4/FCSys/archive/cb4b17f34313b9d8f2d4223d5365684b4dc1ab65.zip"} +{"path": "FCSys 0.2.6", "sha": "cb4b17f34313b9d8f2d4223d5365684b4dc1ab65", "support": "obsolete", "uses": {"Modelica": "4.0.0"}, "version": "0.2.6", "zipfile": "https://github.com/kdavies4/FCSys/archive/cb4b17f34313b9d8f2d4223d5365684b4dc1ab65.zip", "extraInfo": "Conversion script /home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om//Resources/Scripts/Conversion/ConvertModelica_from_3.2.3_to_4.0.0.mos was applied"} \ No newline at end of file diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/FCSys 0.2.6/package.mo" "converted-libraries/.openmodelica/libraries/FCSys 0.2.6/package.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/FCSys 0.2.6/package.mo" 2022-03-10 09:57:41.792144607 +0000 +++ "converted-libraries/.openmodelica/libraries/FCSys 0.2.6/package.mo" 2022-03-10 09:58:08.292147964 +0000 @@ -42,7 +42,7 @@ annotation ( preferredView="info", - uses(Modelica(version="3.2.1")), + uses(Modelica(version= "4.0.0")), Commands(executeCall=FCSys.Units.setup() "Re-initialize the units."), Documentation(info="

FCSys is a free, open-source library of