diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Architectures/SensorComparison/Implementation/BasicPlant.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Architectures/SensorComparison/Implementation/BasicPlant.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Architectures/SensorComparison/Implementation/BasicPlant.mo" 2022-03-10 09:57:42.504144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Architectures/SensorComparison/Implementation/BasicPlant.mo" 2022-03-10 09:57:54.960146275 +0000 @@ -1,11 +1,11 @@ within ModelicaByExample.Architectures.SensorComparison.Implementation; model BasicPlant "Implementation of the basic plant model" - parameter Modelica.SIunits.Inertia J_a=0.1 "Moment of inertia"; - parameter Modelica.SIunits.Inertia J_b=0.3 "Moment of inertia"; - parameter Modelica.SIunits.RotationalSpringConstant c=100 "Spring constant"; - parameter Modelica.SIunits.RotationalDampingConstant d_shaft=3 + parameter Modelica.Units.SI.Inertia J_a=0.1 "Moment of inertia"; + parameter Modelica.Units.SI.Inertia J_b=0.3 "Moment of inertia"; + parameter Modelica.Units.SI.RotationalSpringConstant c=100 "Spring constant"; + parameter Modelica.Units.SI.RotationalDampingConstant d_shaft=3 "Shaft damping constant"; - parameter Modelica.SIunits.RotationalDampingConstant d_load=4 + parameter Modelica.Units.SI.RotationalDampingConstant d_load=4 "Load damping constant"; Modelica.Mechanics.Rotational.Interfaces.Support housing diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Architectures/SensorComparison/Implementation/LimitedActuator.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Architectures/SensorComparison/Implementation/LimitedActuator.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Architectures/SensorComparison/Implementation/LimitedActuator.mo" 2022-03-10 09:57:42.504144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Architectures/SensorComparison/Implementation/LimitedActuator.mo" 2022-03-10 09:57:54.892146266 +0000 @@ -1,7 +1,7 @@ within ModelicaByExample.Architectures.SensorComparison.Implementation; model LimitedActuator "An actuator with lag and saturation" extends Interfaces.Actuator; - parameter Modelica.SIunits.Time delayTime + parameter Modelica.Units.SI.Time delayTime "Delay time of output with respect to input signal"; parameter Real uMax "Upper limits of input signals"; protected diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Architectures/SensorComparison/Implementation/PID_Controller.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Architectures/SensorComparison/Implementation/PID_Controller.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Architectures/SensorComparison/Implementation/PID_Controller.mo" 2022-03-10 09:57:42.504144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Architectures/SensorComparison/Implementation/PID_Controller.mo" 2022-03-10 09:57:54.876146265 +0000 @@ -2,8 +2,8 @@ model PID_Controller "Controller subsystem implemented using a PID controller" extends Interfaces.Controller; parameter Real k "Gain of controller"; - parameter Modelica.SIunits.Time Ti "Time constant of Integrator block"; - parameter Modelica.SIunits.Time Td "Time constant of Derivative block"; + parameter Modelica.Units.SI.Time Ti "Time constant of Integrator block"; + parameter Modelica.Units.SI.Time Td "Time constant of Derivative block"; parameter Real yMax "Upper limit of output"; protected Modelica.Blocks.Continuous.LimPID PID(k=k, Ti=Ti, Td=Td, yMax=yMax) diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Architectures/SensorComparison/Implementation/SampleHoldSensor.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Architectures/SensorComparison/Implementation/SampleHoldSensor.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Architectures/SensorComparison/Implementation/SampleHoldSensor.mo" 2022-03-10 09:57:42.504144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Architectures/SensorComparison/Implementation/SampleHoldSensor.mo" 2022-03-10 09:57:54.836146259 +0000 @@ -1,6 +1,6 @@ within ModelicaByExample.Architectures.SensorComparison.Implementation; model SampleHoldSensor "Implementation of a sample hold sensor" - parameter Modelica.SIunits.Time sample_time(min=Modelica.Constants.eps); + parameter Modelica.Units.SI.Time sample_time(min=Modelica.Constants.eps); Modelica.Mechanics.Rotational.Interfaces.Flange_a shaft "Flange of shaft from which sensor information shall be measured" annotation (Placement(transformation(extent={{-110,-10},{-90,10}}))); diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Architectures/ThermalControl/Bogus/BusPIControl.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Architectures/ThermalControl/Bogus/BusPIControl.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Architectures/ThermalControl/Bogus/BusPIControl.mo" 2022-03-10 09:57:42.504144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Architectures/ThermalControl/Bogus/BusPIControl.mo" 2022-03-10 09:57:54.664146237 +0000 @@ -4,7 +4,7 @@ ModelicaByExample.Architectures.ThermalControl.Bogus.ControlSystem_WithBus; parameter Real setpoint "Desired temperature"; parameter Real k=1 "Gain"; - parameter Modelica.SIunits.Time T "Time Constant (T>0 required)"; + parameter Modelica.Units.SI.Time T "Time Constant (T>0 required)"; protected Modelica.Blocks.Sources.Trapezoid const( amplitude=5, diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Architectures/ThermalControl/Implementations/ConventionalPIControl.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Architectures/ThermalControl/Implementations/ConventionalPIControl.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Architectures/ThermalControl/Implementations/ConventionalPIControl.mo" 2022-03-10 09:57:42.508144697 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Architectures/ThermalControl/Implementations/ConventionalPIControl.mo" 2022-03-10 09:57:54.452146212 +0000 @@ -3,7 +3,7 @@ extends Interfaces.ControlSystem; parameter Real setpoint "Desired temperature"; parameter Real k=1 "Gain"; - parameter Modelica.SIunits.Time T "Time Constant (T>0 required)"; + parameter Modelica.Units.SI.Time T "Time Constant (T>0 required)"; protected Modelica.Blocks.Sources.Trapezoid setpoint_signal( amplitude=5, final offset=setpoint, diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Architectures/ThermalControl/Implementations/ExpandablePIControl.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Architectures/ThermalControl/Implementations/ExpandablePIControl.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Architectures/ThermalControl/Implementations/ExpandablePIControl.mo" 2022-03-10 09:57:42.508144697 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Architectures/ThermalControl/Implementations/ExpandablePIControl.mo" 2022-03-10 09:57:54.428146208 +0000 @@ -3,7 +3,7 @@ extends Interfaces.ControlSystem_WithExpandableBus; parameter Real setpoint "Desired temperature"; parameter Real k=1 "Gain"; - parameter Modelica.SIunits.Time T "Time Constant (T>0 required)"; + parameter Modelica.Units.SI.Time T "Time Constant (T>0 required)"; protected Modelica.Blocks.Sources.Trapezoid setpoint_signal( amplitude=5, final offset=setpoint, rising=1, diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Architectures/ThermalControl/Implementations/ThreeZonePlantModel.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Architectures/ThermalControl/Implementations/ThreeZonePlantModel.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Architectures/ThermalControl/Implementations/ThreeZonePlantModel.mo" 2022-03-10 09:57:42.508144697 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Architectures/ThermalControl/Implementations/ThreeZonePlantModel.mo" 2022-03-10 09:57:54.384146202 +0000 @@ -1,9 +1,9 @@ within ModelicaByExample.Architectures.ThermalControl.Implementations; model ThreeZonePlantModel "A plant model with three zones" extends Interfaces.PlantModel; - parameter Modelica.SIunits.HeatCapacity C "Zone capacitance"; - parameter Modelica.SIunits.ThermalConductance G "Conductance between rooms"; - parameter Modelica.SIunits.Temperature T_ambient "Fixed temperature at port"; + parameter Modelica.Units.SI.HeatCapacity C "Zone capacitance"; + parameter Modelica.Units.SI.ThermalConductance G "Conductance between rooms"; + parameter Modelica.Units.SI.Temperature T_ambient "Fixed temperature at port"; parameter Real h "Convenction coefficient"; protected Modelica.Thermal.HeatTransfer.Components.HeatCapacitor zone1(C=C) diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/BlockDiagrams/Examples/ControlledCooling.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/BlockDiagrams/Examples/ControlledCooling.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/BlockDiagrams/Examples/ControlledCooling.mo" 2022-03-10 09:57:42.508144697 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/BlockDiagrams/Examples/ControlledCooling.mo" 2022-03-10 09:57:53.592146101 +0000 @@ -1,13 +1,13 @@ within ModelicaByExample.Components.BlockDiagrams.Examples; model ControlledCooling "Adding a setpoint and control strategy" - import Modelica.SIunits.Conversions.from_degC; + import Modelica.Units.Conversions.from_degC; parameter Real h = 0.7 "Convection coefficient"; parameter Real m = 0.1 "Thermal maass"; parameter Real c_p = 1.2 "Specific heat"; parameter Real T_inf = from_degC(27.5) "Ambient temperature"; parameter Real T_bar = from_degC(30.0) "Desired temperature"; parameter Real k = 2.0 "Controller gain"; - Components.Integrator T(y0=Modelica.SIunits.Conversions.from_degC(20)) + Components.Integrator T(y0=Modelica.Units.Conversions.from_degC(20)) annotation (Placement(transformation(extent={{-10,-10},{10,10}}))); Components.Constant ambient(k=T_inf) annotation (Placement(transformation(extent={{-10,-40},{10,-20}}))); diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/BlockDiagrams/Examples/MultiDomainControl.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/BlockDiagrams/Examples/MultiDomainControl.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/BlockDiagrams/Examples/MultiDomainControl.mo" 2022-03-10 09:57:42.508144697 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/BlockDiagrams/Examples/MultiDomainControl.mo" 2022-03-10 09:57:53.568146100 +0000 @@ -2,7 +2,7 @@ model MultiDomainControl "Mixing thermal components with blocks for sensing, actuation and control" - import Modelica.SIunits.Conversions.from_degC; + import Modelica.Units.Conversions.from_degC; parameter Real h = 0.7 "Convection coefficient"; parameter Real A = 1.0 "Area"; diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/BlockDiagrams/Examples/NewtonCooling.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/BlockDiagrams/Examples/NewtonCooling.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/BlockDiagrams/Examples/NewtonCooling.mo" 2022-03-10 09:57:42.508144697 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/BlockDiagrams/Examples/NewtonCooling.mo" 2022-03-10 09:57:53.556146098 +0000 @@ -1,6 +1,6 @@ within ModelicaByExample.Components.BlockDiagrams.Examples; model NewtonCooling "Newton cooling system modeled with blocks" - import Modelica.SIunits.Conversions.from_degC; + import Modelica.Units.Conversions.from_degC; parameter Real h = 0.7 "Convection coefficient"; parameter Real A = 1.0 "Area"; parameter Real m = 0.1 "Thermal mass"; diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/ChemicalReactions/ABX/Components/Solution.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/ChemicalReactions/ABX/Components/Solution.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/ChemicalReactions/ABX/Components/Solution.mo" 2022-03-10 09:57:42.512144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/ChemicalReactions/ABX/Components/Solution.mo" 2022-03-10 09:57:53.348146072 +0000 @@ -2,7 +2,7 @@ model Solution "A mixture of species A, B and X" Interfaces.Mixture mixture annotation (Placement(transformation(extent={{90,-10},{110,10}}))); - Modelica.SIunits.Concentration C[Species]=mixture.C + Modelica.Units.SI.Concentration C[Species]=mixture.C annotation(Dialog(group="Initialization",showStartAttribute=true)); equation der(mixture.C) = mixture.R; diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/ChemicalReactions/ABX/Interfaces/Mixture.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/ChemicalReactions/ABX/Interfaces/Mixture.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/ChemicalReactions/ABX/Interfaces/Mixture.mo" 2022-03-10 09:57:42.512144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/ChemicalReactions/ABX/Interfaces/Mixture.mo" 2022-03-10 09:57:53.316146068 +0000 @@ -1,5 +1,5 @@ within ModelicaByExample.Components.ChemicalReactions.ABX.Interfaces; connector Mixture - Modelica.SIunits.Concentration C[Species]; + Modelica.Units.SI.Concentration C[Species]; flow ConcentrationRate R[Species]; end Mixture; diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/ChemicalReactions/ABX/Interfaces/Reaction.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/ChemicalReactions/ABX/Interfaces/Reaction.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/ChemicalReactions/ABX/Interfaces/Reaction.mo" 2022-03-10 09:57:42.512144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/ChemicalReactions/ABX/Interfaces/Reaction.mo" 2022-03-10 09:57:53.304146065 +0000 @@ -6,7 +6,7 @@ protected ConcentrationRate consumed[Species]; ConcentrationRate produced[Species]; - Modelica.SIunits.Concentration C[Species] = mixture.C; + Modelica.Units.SI.Concentration C[Species] = mixture.C; equation consumed = -produced; mixture.R = consumed; diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Electrical/DryApproach/Capacitor.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Electrical/DryApproach/Capacitor.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Electrical/DryApproach/Capacitor.mo" 2022-03-10 09:57:42.512144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Electrical/DryApproach/Capacitor.mo" 2022-03-10 09:57:53.232146056 +0000 @@ -1,6 +1,6 @@ within ModelicaByExample.Components.Electrical.DryApproach; model Capacitor "A DRY capacitor model" - parameter Modelica.SIunits.Capacitance C; + parameter Modelica.Units.SI.Capacitance C; extends TwoPin; equation C*der(v) = i; diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Electrical/DryApproach/Inductor.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Electrical/DryApproach/Inductor.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Electrical/DryApproach/Inductor.mo" 2022-03-10 09:57:42.512144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Electrical/DryApproach/Inductor.mo" 2022-03-10 09:57:53.204146053 +0000 @@ -1,6 +1,6 @@ within ModelicaByExample.Components.Electrical.DryApproach; model Inductor "A DRY inductor model" - parameter Modelica.SIunits.Inductance L; + parameter Modelica.Units.SI.Inductance L; extends TwoPin; equation L*der(i) = v; diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Electrical/DryApproach/Resistor.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Electrical/DryApproach/Resistor.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Electrical/DryApproach/Resistor.mo" 2022-03-10 09:57:42.512144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Electrical/DryApproach/Resistor.mo" 2022-03-10 09:57:53.192146051 +0000 @@ -1,6 +1,6 @@ within ModelicaByExample.Components.Electrical.DryApproach; model Resistor "A DRY resistor model" - parameter Modelica.SIunits.Resistance R; + parameter Modelica.Units.SI.Resistance R; extends TwoPin; equation v = i*R "Ohm's law"; diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Electrical/DryApproach/StepVoltage.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Electrical/DryApproach/StepVoltage.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Electrical/DryApproach/StepVoltage.mo" 2022-03-10 09:57:42.512144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Electrical/DryApproach/StepVoltage.mo" 2022-03-10 09:57:53.184146050 +0000 @@ -1,8 +1,8 @@ within ModelicaByExample.Components.Electrical.DryApproach; model StepVoltage "A DRY step voltage source" - parameter Modelica.SIunits.Voltage V0; - parameter Modelica.SIunits.Voltage Vf; - parameter Modelica.SIunits.Time stepTime; + parameter Modelica.Units.SI.Voltage V0; + parameter Modelica.Units.SI.Voltage Vf; + parameter Modelica.Units.SI.Time stepTime; extends TwoPin; equation v = if time>=stepTime then Vf else V0; diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Electrical/DryApproach/TwoPin.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Electrical/DryApproach/TwoPin.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Electrical/DryApproach/TwoPin.mo" 2022-03-10 09:57:42.512144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Electrical/DryApproach/TwoPin.mo" 2022-03-10 09:57:53.168146048 +0000 @@ -5,8 +5,8 @@ Modelica.Electrical.Analog.Interfaces.NegativePin n annotation (Placement(transformation(extent={{90,-10},{110,10}}))); - Modelica.SIunits.Voltage v = p.v-n.v; - Modelica.SIunits.Current i = p.i; + Modelica.Units.SI.Voltage v = p.v-n.v; + Modelica.Units.SI.Current i = p.i; equation p.i + n.i = 0 "Conservation of charge"; annotation (Icon(graphics={ diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Electrical/VerboseApproach/Capacitor.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Electrical/VerboseApproach/Capacitor.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Electrical/VerboseApproach/Capacitor.mo" 2022-03-10 09:57:42.512144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Electrical/VerboseApproach/Capacitor.mo" 2022-03-10 09:57:53.132146044 +0000 @@ -1,12 +1,12 @@ within ModelicaByExample.Components.Electrical.VerboseApproach; model Capacitor "A capacitor model" - parameter Modelica.SIunits.Capacitance C; + parameter Modelica.Units.SI.Capacitance C; Modelica.Electrical.Analog.Interfaces.PositivePin p annotation (Placement(transformation(extent={{-110,-10},{-90,10}}))); Modelica.Electrical.Analog.Interfaces.NegativePin n annotation (Placement(transformation(extent={{90,-10},{110,10}}))); protected - Modelica.SIunits.Voltage v = p.v-n.v; + Modelica.Units.SI.Voltage v = p.v-n.v; equation p.i + n.i = 0 "Conservation of charge"; C*der(v) = p.i; diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Electrical/VerboseApproach/Inductor.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Electrical/VerboseApproach/Inductor.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Electrical/VerboseApproach/Inductor.mo" 2022-03-10 09:57:42.512144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Electrical/VerboseApproach/Inductor.mo" 2022-03-10 09:57:53.104146040 +0000 @@ -1,12 +1,12 @@ within ModelicaByExample.Components.Electrical.VerboseApproach; model Inductor "An inductor model" - parameter Modelica.SIunits.Inductance L; + parameter Modelica.Units.SI.Inductance L; Modelica.Electrical.Analog.Interfaces.PositivePin p annotation (Placement(transformation(extent={{-110,-10},{-90,10}}))); Modelica.Electrical.Analog.Interfaces.NegativePin n annotation (Placement(transformation(extent={{90,-10},{110,10}}))); protected - Modelica.SIunits.Voltage v = p.v-n.v; + Modelica.Units.SI.Voltage v = p.v-n.v; equation p.i + n.i = 0 "Conservation of charge"; L*der(p.i) = p.v; diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Electrical/VerboseApproach/Resistor.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Electrical/VerboseApproach/Resistor.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Electrical/VerboseApproach/Resistor.mo" 2022-03-10 09:57:42.512144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Electrical/VerboseApproach/Resistor.mo" 2022-03-10 09:57:53.088146039 +0000 @@ -1,12 +1,12 @@ within ModelicaByExample.Components.Electrical.VerboseApproach; model Resistor "A resistor model" - parameter Modelica.SIunits.Resistance R; + parameter Modelica.Units.SI.Resistance R; Modelica.Electrical.Analog.Interfaces.PositivePin p annotation (Placement(transformation(extent={{-110,-10},{-90,10}}))); Modelica.Electrical.Analog.Interfaces.NegativePin n annotation (Placement(transformation(extent={{90,-10},{110,10}}))); protected - Modelica.SIunits.Voltage v = p.v-n.v; + Modelica.Units.SI.Voltage v = p.v-n.v; equation p.i + n.i = 0 "Conservation of charge"; v = p.i*R "Ohm's law"; diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/HeatTransfer/AmbientCondition.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/HeatTransfer/AmbientCondition.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/HeatTransfer/AmbientCondition.mo" 2022-03-10 09:57:42.512144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/HeatTransfer/AmbientCondition.mo" 2022-03-10 09:57:53.060146034 +0000 @@ -1,7 +1,7 @@ within ModelicaByExample.Components.HeatTransfer; model AmbientCondition "Model of an \"infinite reservoir\" at some ambient temperature" - parameter Modelica.SIunits.Temperature T_amb "Ambient temperature"; + parameter Modelica.Units.SI.Temperature T_amb "Ambient temperature"; Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a node annotation ( Placement(transformation(extent={{-10,-10},{10,10}}), iconTransformation( extent={{-10,-10},{10,10}}))); diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/HeatTransfer/Convection.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/HeatTransfer/Convection.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/HeatTransfer/Convection.mo" 2022-03-10 09:57:42.512144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/HeatTransfer/Convection.mo" 2022-03-10 09:57:53.032146032 +0000 @@ -1,7 +1,7 @@ within ModelicaByExample.Components.HeatTransfer; model Convection "Modeling convection between port_a and port_b" - parameter Modelica.SIunits.CoefficientOfHeatTransfer h; - parameter Modelica.SIunits.Area A; + parameter Modelica.Units.SI.CoefficientOfHeatTransfer h; + parameter Modelica.Units.SI.Area A; Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a port_a annotation (Placement(transformation(extent={{-110,-10},{-90,10}}))); Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_b port_b diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/HeatTransfer/ConvectionToAmbient.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/HeatTransfer/ConvectionToAmbient.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/HeatTransfer/ConvectionToAmbient.mo" 2022-03-10 09:57:42.512144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/HeatTransfer/ConvectionToAmbient.mo" 2022-03-10 09:57:53.012146029 +0000 @@ -1,8 +1,8 @@ within ModelicaByExample.Components.HeatTransfer; model ConvectionToAmbient "An overly specialized model of convection" - parameter Modelica.SIunits.CoefficientOfHeatTransfer h; - parameter Modelica.SIunits.Area A; - parameter Modelica.SIunits.Temperature T_amb "Ambient temperature"; + parameter Modelica.Units.SI.CoefficientOfHeatTransfer h; + parameter Modelica.Units.SI.Area A; + parameter Modelica.Units.SI.Temperature T_amb "Ambient temperature"; Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a port_a annotation (Placement(transformation(extent={{-110,-10},{-90,10}}))); equation diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/HeatTransfer/ThermalCapacitance.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/HeatTransfer/ThermalCapacitance.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/HeatTransfer/ThermalCapacitance.mo" 2022-03-10 09:57:42.512144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/HeatTransfer/ThermalCapacitance.mo" 2022-03-10 09:57:52.920146017 +0000 @@ -1,7 +1,7 @@ within ModelicaByExample.Components.HeatTransfer; model ThermalCapacitance "A model of thermal capacitance" - parameter Modelica.SIunits.HeatCapacity C "Thermal capacitance"; - parameter Modelica.SIunits.Temperature T0 "Initial temperature"; + parameter Modelica.Units.SI.HeatCapacity C "Thermal capacitance"; + parameter Modelica.Units.SI.Temperature T0 "Initial temperature"; Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a node annotation (Placement(transformation(extent={{-10,-10},{10,10}}))); initial equation diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/LotkaVolterra/Components/RegionalPopulation.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/LotkaVolterra/Components/RegionalPopulation.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/LotkaVolterra/Components/RegionalPopulation.mo" 2022-03-10 09:57:42.512144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/LotkaVolterra/Components/RegionalPopulation.mo" 2022-03-10 09:57:52.872146010 +0000 @@ -19,7 +19,6 @@ population = initial_population; elseif init==InitializationOptions.SteadyState then der(population) = 0; - else end if; equation der(population) = species.rate; diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/Components/Backlash.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/Components/Backlash.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/Components/Backlash.mo" 2022-03-10 09:57:42.516144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/Components/Backlash.mo" 2022-03-10 09:57:52.712145990 +0000 @@ -1,7 +1,7 @@ within ModelicaByExample.Components.Rotational.Components; model Backlash "A rotational backlash model" - parameter Modelica.SIunits.RotationalSpringConstant c "Torsional stiffness"; - parameter Modelica.SIunits.Angle b(final min=0) "Total lash"; + parameter Modelica.Units.SI.RotationalSpringConstant c "Torsional stiffness"; + parameter Modelica.Units.SI.Angle b(final min=0) "Total lash"; extends ModelicaByExample.Components.Rotational.Interfaces.Compliant; equation if phi_rel>b/2 then diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/Components/ConfigurableGear.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/Components/ConfigurableGear.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/Components/ConfigurableGear.mo" 2022-03-10 09:57:42.516144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/Components/ConfigurableGear.mo" 2022-03-10 09:57:52.700145989 +0000 @@ -8,7 +8,7 @@ tau = -flange_a.tau-flange_b.tau) if not grounded "Connection for housing" annotation (Placement(transformation(extent={{-10,-110},{10,-90}}))); protected - Modelica.SIunits.Angle housing_phi; + Modelica.Units.SI.Angle housing_phi; equation if grounded then housing_phi = 0; diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/Components/Damper.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/Components/Damper.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/Components/Damper.mo" 2022-03-10 09:57:42.516144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/Components/Damper.mo" 2022-03-10 09:57:52.684145988 +0000 @@ -1,6 +1,6 @@ within ModelicaByExample.Components.Rotational.Components; model Damper "A rotational damper" - parameter Modelica.SIunits.RotationalDampingConstant d; + parameter Modelica.Units.SI.RotationalDampingConstant d; extends ModelicaByExample.Components.Rotational.Interfaces.Compliant; equation tau = d*der(phi_rel) "Damping relationship"; diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/Components/Inertia.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/Components/Inertia.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/Components/Inertia.mo" 2022-03-10 09:57:42.516144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/Components/Inertia.mo" 2022-03-10 09:57:52.656145983 +0000 @@ -1,10 +1,10 @@ within ModelicaByExample.Components.Rotational.Components; model Inertia "A rotational inertia model" - parameter Modelica.SIunits.Inertia J; + parameter Modelica.Units.SI.Inertia J; extends ModelicaByExample.Components.Rotational.Interfaces.TwoFlange; - Modelica.SIunits.AngularVelocity w "Angular Velocity" + Modelica.Units.SI.AngularVelocity w "Angular Velocity" annotation(Dialog(group="Initialization", showStartAttribute=true)); - Modelica.SIunits.Angle phi "Angle" + Modelica.Units.SI.Angle phi "Angle" annotation(Dialog(group="Initialization", showStartAttribute=true)); equation phi = flange_a.phi; diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/Components/Inertia2.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/Components/Inertia2.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/Components/Inertia2.mo" 2022-03-10 09:57:42.516144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/Components/Inertia2.mo" 2022-03-10 09:57:52.632145980 +0000 @@ -1,11 +1,11 @@ within ModelicaByExample.Components.Rotational.Components; model Inertia2 "A rotational inertia model with optional initial conditions" - parameter Modelica.SIunits.Inertia J; - parameter Modelica.SIunits.Angle phi0 "Initial angle"; - parameter Modelica.SIunits.AngularVelocity w0 "Initial velocity"; + parameter Modelica.Units.SI.Inertia J; + parameter Modelica.Units.SI.Angle phi0 "Initial angle"; + parameter Modelica.Units.SI.AngularVelocity w0 "Initial velocity"; extends ModelicaByExample.Components.Rotational.Interfaces.TwoFlange; protected - Modelica.SIunits.AngularVelocity w; + Modelica.Units.SI.AngularVelocity w; initial equation flange_a.phi = phi0; w = w0; diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/Components/Spring.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/Components/Spring.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/Components/Spring.mo" 2022-03-10 09:57:42.516144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/Components/Spring.mo" 2022-03-10 09:57:52.624145979 +0000 @@ -1,6 +1,6 @@ within ModelicaByExample.Components.Rotational.Components; model Spring "A rotational spring component" - parameter Modelica.SIunits.RotationalSpringConstant c; + parameter Modelica.Units.SI.RotationalSpringConstant c; extends ModelicaByExample.Components.Rotational.Interfaces.Compliant; equation tau = c*phi_rel "Hooke's Law"; diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/Interfaces/Compliant.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/Interfaces/Compliant.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/Interfaces/Compliant.mo" 2022-03-10 09:57:42.516144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/Interfaces/Compliant.mo" 2022-03-10 09:57:52.464145959 +0000 @@ -2,7 +2,7 @@ partial model Compliant "A compliant rotational component" extends ModelicaByExample.Components.Rotational.Interfaces.TwoFlange; protected - Modelica.SIunits.Torque tau; + Modelica.Units.SI.Torque tau; equation tau = flange_a.tau; flange_a.tau + flange_b.tau = 0 diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/Interfaces/TwoFlange.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/Interfaces/TwoFlange.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/Interfaces/TwoFlange.mo" 2022-03-10 09:57:42.516144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/Interfaces/TwoFlange.mo" 2022-03-10 09:57:52.456145959 +0000 @@ -7,7 +7,7 @@ Modelica.Mechanics.Rotational.Interfaces.Flange_b flange_b annotation (Placement(transformation(extent={{90,-10},{110,10}}))); protected - Modelica.SIunits.Angle phi_rel; + Modelica.Units.SI.Angle phi_rel; equation phi_rel = flange_a.phi-flange_b.phi; end TwoFlange; diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/VerboseApproach/Damper.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/VerboseApproach/Damper.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/VerboseApproach/Damper.mo" 2022-03-10 09:57:42.516144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/VerboseApproach/Damper.mo" 2022-03-10 09:57:52.432145956 +0000 @@ -1,13 +1,13 @@ within ModelicaByExample.Components.Rotational.VerboseApproach; model Damper "Rotational damper without inheritance" - parameter Modelica.SIunits.RotationalDampingConstant d; + parameter Modelica.Units.SI.RotationalDampingConstant d; Modelica.Mechanics.Rotational.Interfaces.Flange_a flange_a annotation (Placement(transformation(extent={{-110,-10},{-90,10}}))); Modelica.Mechanics.Rotational.Interfaces.Flange_b flange_b annotation (Placement(transformation(extent={{90,-10},{110,10}}))); protected - Modelica.SIunits.Angle phi_rel; - Modelica.SIunits.Torque tau; + Modelica.Units.SI.Angle phi_rel; + Modelica.Units.SI.Torque tau; equation // Variables phi_rel = flange_a.phi-flange_b.phi; diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/VerboseApproach/Inertia.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/VerboseApproach/Inertia.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/VerboseApproach/Inertia.mo" 2022-03-10 09:57:42.516144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/VerboseApproach/Inertia.mo" 2022-03-10 09:57:52.420145953 +0000 @@ -1,14 +1,14 @@ within ModelicaByExample.Components.Rotational.VerboseApproach; model Inertia "Rotational inertia without inheritance" - parameter Modelica.SIunits.Inertia J; + parameter Modelica.Units.SI.Inertia J; Modelica.Mechanics.Rotational.Interfaces.Flange_a flange_a annotation (Placement(transformation(extent={{-110,-10},{-90,10}}))); Modelica.Mechanics.Rotational.Interfaces.Flange_b flange_b annotation (Placement(transformation(extent={{90,-10},{110,10}}))); protected - Modelica.SIunits.Angle phi_rel; - Modelica.SIunits.Torque tau; - Modelica.SIunits.AngularVelocity w; + Modelica.Units.SI.Angle phi_rel; + Modelica.Units.SI.Torque tau; + Modelica.Units.SI.AngularVelocity w; equation // Variables phi_rel = flange_a.phi-flange_b.phi; diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/VerboseApproach/Spring.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/VerboseApproach/Spring.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/VerboseApproach/Spring.mo" 2022-03-10 09:57:42.516144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/Rotational/VerboseApproach/Spring.mo" 2022-03-10 09:57:52.404145951 +0000 @@ -1,13 +1,13 @@ within ModelicaByExample.Components.Rotational.VerboseApproach; model Spring "Rotational spring without inheritance" - parameter Modelica.SIunits.RotationalSpringConstant c; + parameter Modelica.Units.SI.RotationalSpringConstant c; Modelica.Mechanics.Rotational.Interfaces.Flange_a flange_a annotation (Placement(transformation(extent={{-110,-10},{-90,10}}))); Modelica.Mechanics.Rotational.Interfaces.Flange_b flange_b annotation (Placement(transformation(extent={{90,-10},{110,10}}))); protected - Modelica.SIunits.Angle phi_rel; - Modelica.SIunits.Torque tau; + Modelica.Units.SI.Angle phi_rel; + Modelica.Units.SI.Torque tau; equation // Variables phi_rel = flange_a.phi-flange_b.phi; diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/SpeedMeasurement/Components/IntervalMeasure.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/SpeedMeasurement/Components/IntervalMeasure.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/SpeedMeasurement/Components/IntervalMeasure.mo" 2022-03-10 09:57:42.516144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/SpeedMeasurement/Components/IntervalMeasure.mo" 2022-03-10 09:57:52.364145946 +0000 @@ -6,7 +6,7 @@ Real next_phi, prev_phi; Real last_time; protected - parameter Modelica.SIunits.Angle tooth_angle=2*Modelica.Constants.pi/teeth; + parameter Modelica.Units.SI.Angle tooth_angle=2*Modelica.Constants.pi/teeth; initial equation next_phi = flange.phi+tooth_angle; prev_phi = flange.phi-tooth_angle; diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/SpeedMeasurement/Components/PulseCounter.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/SpeedMeasurement/Components/PulseCounter.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/SpeedMeasurement/Components/PulseCounter.mo" 2022-03-10 09:57:42.516144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/SpeedMeasurement/Components/PulseCounter.mo" 2022-03-10 09:57:52.360145945 +0000 @@ -1,12 +1,12 @@ within ModelicaByExample.Components.SpeedMeasurement.Components; model PulseCounter "Compute speed using pulse counting" extends Interfaces.SpeedSensor; - parameter Modelica.SIunits.Time sample_time; + parameter Modelica.Units.SI.Time sample_time; parameter Integer teeth; - Modelica.SIunits.Angle next_phi, prev_phi; + Modelica.Units.SI.Angle next_phi, prev_phi; Integer count; protected - parameter Modelica.SIunits.Angle tooth_angle=2*Modelica.Constants.pi/teeth; + parameter Modelica.Units.SI.Angle tooth_angle=2*Modelica.Constants.pi/teeth; initial equation next_phi = flange.phi+tooth_angle; prev_phi = flange.phi-tooth_angle; diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/SpeedMeasurement/Components/SampleHold.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/SpeedMeasurement/Components/SampleHold.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/SpeedMeasurement/Components/SampleHold.mo" 2022-03-10 09:57:42.516144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Components/SpeedMeasurement/Components/SampleHold.mo" 2022-03-10 09:57:52.348145945 +0000 @@ -1,7 +1,7 @@ within ModelicaByExample.Components.SpeedMeasurement.Components; model SampleHold "A sample-hold ideal speed sensor" extends Interfaces.SpeedSensor; - parameter Modelica.SIunits.Time sample_time; + parameter Modelica.Units.SI.Time sample_time; initial equation w = der(flange.phi); equation diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Connectors/FluidConnectors.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Connectors/FluidConnectors.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Connectors/FluidConnectors.mo" 2022-03-10 09:57:42.516144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Connectors/FluidConnectors.mo" 2022-03-10 09:57:52.232145929 +0000 @@ -1,19 +1,19 @@ within ModelicaByExample.Connectors; package FluidConnectors "Examples of fluid connectors" connector Incompressible - Modelica.SIunits.Pressure p; - flow Modelica.SIunits.VolumeFlowRate q; + Modelica.Units.SI.Pressure p; + flow Modelica.Units.SI.VolumeFlowRate q; end Incompressible; connector GenericFluid - Modelica.SIunits.Pressure p; - flow Modelica.SIunits.MassFlowRate m_flow; + Modelica.Units.SI.Pressure p; + flow Modelica.Units.SI.MassFlowRate m_flow; end GenericFluid; connector ThermoFluid - Modelica.SIunits.Pressure p; - flow Modelica.SIunits.MassFlowRate m_flow; - Modelica.SIunits.Temperature T; - flow Modelica.SIunits.HeatFlowRate q; + Modelica.Units.SI.Pressure p; + flow Modelica.Units.SI.MassFlowRate m_flow; + Modelica.Units.SI.Temperature T; + flow Modelica.Units.SI.HeatFlowRate q; end ThermoFluid; end FluidConnectors; diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Connectors/Graphics.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Connectors/Graphics.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Connectors/Graphics.mo" 2022-03-10 09:57:42.516144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Connectors/Graphics.mo" 2022-03-10 09:57:52.224145929 +0000 @@ -1,8 +1,8 @@ within ModelicaByExample.Connectors; package Graphics connector PositivePin - Modelica.SIunits.Voltage v; - flow Modelica.SIunits.Current i; + Modelica.Units.SI.Voltage v; + flow Modelica.Units.SI.Current i; annotation ( Icon(graphics={ Ellipse( @@ -38,8 +38,8 @@ end PositivePin; connector NegativePin - Modelica.SIunits.Voltage v; - flow Modelica.SIunits.Current i; + Modelica.Units.SI.Voltage v; + flow Modelica.Units.SI.Current i; annotation ( Icon(graphics={ Ellipse( diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Connectors/SimpleDomains.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Connectors/SimpleDomains.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Connectors/SimpleDomains.mo" 2022-03-10 09:57:42.516144698 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Connectors/SimpleDomains.mo" 2022-03-10 09:57:52.200145925 +0000 @@ -1,22 +1,22 @@ within ModelicaByExample.Connectors; package SimpleDomains "Examples of connectors for simple domains" connector Electrical - Modelica.SIunits.Voltage v; - flow Modelica.SIunits.Current i; + Modelica.Units.SI.Voltage v; + flow Modelica.Units.SI.Current i; end Electrical; connector Thermal - Modelica.SIunits.Temperature T; - flow Modelica.SIunits.HeatFlowRate q; + Modelica.Units.SI.Temperature T; + flow Modelica.Units.SI.HeatFlowRate q; end Thermal; connector Translational - Modelica.SIunits.Position x; - flow Modelica.SIunits.Force f; + Modelica.Units.SI.Position x; + flow Modelica.Units.SI.Force f; end Translational; connector Rotational - Modelica.SIunits.Angle phi; - flow Modelica.SIunits.Torque tau; + Modelica.Units.SI.Angle phi; + flow Modelica.Units.SI.Torque tau; end Rotational; end SimpleDomains; diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/PackageExamples/NewtonCooling.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/PackageExamples/NewtonCooling.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/PackageExamples/NewtonCooling.mo" 2022-03-10 09:57:42.520144699 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/PackageExamples/NewtonCooling.mo" 2022-03-10 09:57:51.472145834 +0000 @@ -1,11 +1,11 @@ within ModelicaByExample.PackageExamples; model NewtonCooling "Cooling example importing physical types from the Modelica Standard Library" - import Modelica.SIunits.Temperature; - import Modelica.SIunits.Mass; - import Modelica.SIunits.Area; - import ConvectionCoefficient = Modelica.SIunits.CoefficientOfHeatTransfer; - import SpecificHeat = Modelica.SIunits.SpecificHeatCapacity; + import Modelica.Units.SI.Temperature; + import Modelica.Units.SI.Mass; + import Modelica.Units.SI.Area; + import ConvectionCoefficient = Modelica.Units.SI.CoefficientOfHeatTransfer; + import SpecificHeat = Modelica.Units.SI.SpecificHeatCapacity; // Parameters parameter Temperature T_inf=300.0 "Ambient temperature"; diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/PackageExamples/RLC.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/PackageExamples/RLC.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/PackageExamples/RLC.mo" 2022-03-10 09:57:42.520144699 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/PackageExamples/RLC.mo" 2022-03-10 09:57:51.464145833 +0000 @@ -1,13 +1,13 @@ within ModelicaByExample.PackageExamples; model RLC "An RLC circuit referencing types from the Modelica Standard Library" - parameter Modelica.SIunits.Voltage Vb=24 "Battery voltage"; - parameter Modelica.SIunits.Inductance L = 1; - parameter Modelica.SIunits.Resistance R = 100; - parameter Modelica.SIunits.Capacitance C = 1e-3; - Modelica.SIunits.Voltage V(fixed=true, start=0); - Modelica.SIunits.Current i_L(fixed=true, start=0); - Modelica.SIunits.Current i_R; - Modelica.SIunits.Current i_C; + parameter Modelica.Units.SI.Voltage Vb=24 "Battery voltage"; + parameter Modelica.Units.SI.Inductance L = 1; + parameter Modelica.Units.SI.Resistance R = 100; + parameter Modelica.Units.SI.Capacitance C = 1e-3; + Modelica.Units.SI.Voltage V(fixed=true, start=0); + Modelica.Units.SI.Current i_L(fixed=true, start=0); + Modelica.Units.SI.Current i_R; + Modelica.Units.SI.Current i_C; equation i_R = V/R; i_C = C*der(V); diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/PackageExamples/SecondOrderSystem.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/PackageExamples/SecondOrderSystem.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/PackageExamples/SecondOrderSystem.mo" 2022-03-10 09:57:42.520144699 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/PackageExamples/SecondOrderSystem.mo" 2022-03-10 09:57:51.452145832 +0000 @@ -1,7 +1,7 @@ within ModelicaByExample.PackageExamples; model SecondOrderSystem "A second order rotational system importing types from Modelica Standard Library" - import Modelica.SIunits.*; + import Modelica.Units.SI.*; parameter Angle phi1_init = 0; parameter Angle phi2_init = 1; parameter AngularVelocity omega1_init = 0; diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Subsystems/GearSubsystemModel/Components/GearWithBacklash.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Subsystems/GearSubsystemModel/Components/GearWithBacklash.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Subsystems/GearSubsystemModel/Components/GearWithBacklash.mo" 2022-03-10 09:57:42.520144699 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Subsystems/GearSubsystemModel/Components/GearWithBacklash.mo" 2022-03-10 09:57:51.412145825 +0000 @@ -4,15 +4,15 @@ import Modelica.Mechanics.Rotational.Components.*; parameter Boolean useSupport(start=true); - parameter Modelica.SIunits.Inertia J_a + parameter Modelica.Units.SI.Inertia J_a "Moment of inertia for element connected to flange 'a'"; - parameter Modelica.SIunits.Inertia J_b + parameter Modelica.Units.SI.Inertia J_b "Moment of inertia for element connected to flange 'b'"; - parameter Modelica.SIunits.RotationalSpringConstant c + parameter Modelica.Units.SI.RotationalSpringConstant c "Backlash spring constant (c > 0 required)"; - parameter Modelica.SIunits.RotationalDampingConstant d + parameter Modelica.Units.SI.RotationalDampingConstant d "Backlash damping constant"; - parameter Modelica.SIunits.Angle b=0 + parameter Modelica.Units.SI.Angle b=0 "Total backlash as measured from flange_a side"; parameter Real ratio "Transmission ratio (flange_a.phi/flange_b.phi, once backlash is cleared)"; diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Subsystems/HeatTransfer/Components/Rod.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Subsystems/HeatTransfer/Components/Rod.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Subsystems/HeatTransfer/Components/Rod.mo" 2022-03-10 09:57:42.520144699 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Subsystems/HeatTransfer/Components/Rod.mo" 2022-03-10 09:57:51.324145814 +0000 @@ -3,18 +3,18 @@ import HTC=Modelica.Thermal.HeatTransfer.Components; parameter Integer n(start=2,min=2) "Number of rod segments"; - parameter Modelica.SIunits.Temperature T0 "Initial rod temperature"; + parameter Modelica.Units.SI.Temperature T0 "Initial rod temperature"; Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a port_a "Thermal connector to ambient" annotation (Placement(transformation(extent={{-110,-10},{-90,10}}))); Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_b port_b "Thermal connector for rod end 'b'" annotation (Placement(transformation(extent={{90,-10},{110,10}}))); - parameter Modelica.SIunits.HeatCapacity C + parameter Modelica.Units.SI.HeatCapacity C "Total heat capacity of element (= cp*m)"; - parameter Modelica.SIunits.ThermalConductance G_wall + parameter Modelica.Units.SI.ThermalConductance G_wall "Thermal conductivity of wall"; - parameter Modelica.SIunits.ThermalConductance G_rod + parameter Modelica.Units.SI.ThermalConductance G_rod "Thermal conductivity of rod"; Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a ambient "Thermal connector to ambient" diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Subsystems/Pendula/Pendulum.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Subsystems/Pendula/Pendulum.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Subsystems/Pendula/Pendulum.mo" 2022-03-10 09:57:42.528144699 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Subsystems/Pendula/Pendulum.mo" 2022-03-10 09:57:51.116145788 +0000 @@ -3,11 +3,11 @@ import Modelica.Mechanics.MultiBody.Parts; import Modelica.Mechanics.MultiBody.Joints; - parameter Modelica.SIunits.Position x; - parameter Modelica.SIunits.Mass m "Mass of mass point"; - parameter Modelica.SIunits.Angle phi "Initial angle"; - parameter Modelica.SIunits.Length L "String length"; - parameter Modelica.SIunits.Diameter d=0.01; + parameter Modelica.Units.SI.Position x; + parameter Modelica.Units.SI.Mass m "Mass of mass point"; + parameter Modelica.Units.SI.Angle phi "Initial angle"; + parameter Modelica.Units.SI.Length L "String length"; + parameter Modelica.Units.SI.Diameter d=0.01; Parts.Fixed ground(r={0,0,x}, animation=false) annotation (Placement( diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Subsystems/Pendula/System.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Subsystems/Pendula/System.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Subsystems/Pendula/System.mo" 2022-03-10 09:57:42.528144699 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Subsystems/Pendula/System.mo" 2022-03-10 09:57:51.104145787 +0000 @@ -4,11 +4,11 @@ import Modelica.Constants.pi; parameter Integer n=15 "Number of pendula"; - parameter Modelica.SIunits.Position x[n] = linspace(0,(n-1)*0.05,n); - parameter Modelica.SIunits.Time T = 54; - parameter Modelica.SIunits.Time X = 30; - parameter Modelica.SIunits.Length lengths[n] = { g_n*(T/(2*pi*(X+(n-i))))^2 for i in 1:n}; - parameter Modelica.SIunits.Angle phi0 = 0.5; + parameter Modelica.Units.SI.Position x[n] = linspace(0,(n-1)*0.05,n); + parameter Modelica.Units.SI.Time T = 54; + parameter Modelica.Units.SI.Time X = 30; + parameter Modelica.Units.SI.Length lengths[n] = { g_n*(T/(2*pi*(X+(n-i))))^2 for i in 1:n}; + parameter Modelica.Units.SI.Angle phi0 = 0.5; Pendulum pendulum[n](x=x, each m=1, each phi=phi0, L=lengths) annotation (Placement(transformation(extent={{-10,-10},{10,10}}))); diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Subsystems/PowerSupply/Components/BasicPowerSupply.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Subsystems/PowerSupply/Components/BasicPowerSupply.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Subsystems/PowerSupply/Components/BasicPowerSupply.mo" 2022-03-10 09:57:42.528144699 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Subsystems/PowerSupply/Components/BasicPowerSupply.mo" 2022-03-10 09:57:51.064145781 +0000 @@ -1,13 +1,13 @@ within ModelicaByExample.Subsystems.PowerSupply.Components; model BasicPowerSupply "Power supply with transformer and rectifier" import Modelica.Electrical.Analog; - parameter Modelica.SIunits.Capacitance C=1e-2 + parameter Modelica.Units.SI.Capacitance C=1e-2 "Filter capacitance" annotation(Dialog(group="General")); - parameter Modelica.SIunits.Conductance Goff=1e-5 + parameter Modelica.Units.SI.Conductance Goff=1e-5 "Backward state-off conductance (opened diode conductance)" annotation(Dialog(group="General")); - parameter Modelica.SIunits.Resistance Ron=1e-5 + parameter Modelica.Units.SI.Resistance Ron=1e-5 "Forward state-on differential resistance (closed diode resistance)" annotation(Dialog(group="General")); parameter Real n=10 @@ -16,7 +16,7 @@ parameter Boolean considerMagnetization=false "Choice of considering magnetization" annotation(Dialog(group="Transformer")); - parameter Modelica.SIunits.Inductance Lm1=1e-2 + parameter Modelica.Units.SI.Inductance Lm1=1e-2 "Magnetization inductance w.r.t. primary side" annotation(Dialog(group="Transformer", enable=considerMagnetization)); diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Subsystems/PowerSupply/Examples/FlatCircuit.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Subsystems/PowerSupply/Examples/FlatCircuit.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Subsystems/PowerSupply/Examples/FlatCircuit.mo" 2022-03-10 09:57:42.532144700 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Subsystems/PowerSupply/Examples/FlatCircuit.mo" 2022-03-10 09:57:51.020145776 +0000 @@ -1,7 +1,7 @@ within ModelicaByExample.Subsystems.PowerSupply.Examples; model FlatCircuit "A model with power source, AC-DC conversion and load in one diagram" import Modelica.Electrical.Analog; - Analog.Sources.SineVoltage wall_voltage(V=120, freqHz=60) + Analog.Sources.SineVoltage wall_voltage(V=120, f =60) annotation (Placement(transformation( extent={{-10,-10},{10,10}}, rotation=270, origin={-90,0}))); diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Subsystems/PowerSupply/Examples/SubsystemCircuit.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Subsystems/PowerSupply/Examples/SubsystemCircuit.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Subsystems/PowerSupply/Examples/SubsystemCircuit.mo" 2022-03-10 09:57:42.532144700 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/Subsystems/PowerSupply/Examples/SubsystemCircuit.mo" 2022-03-10 09:57:50.996145772 +0000 @@ -2,7 +2,7 @@ model SubsystemCircuit "Example using BasicPowerSupply subsystem" Components.BasicPowerSupply power_supply annotation (Placement(transformation(extent={{-10,-10},{10,10}}))); - Modelica.Electrical.Analog.Sources.SineVoltage wall_voltage(V=120, freqHz=60) + Modelica.Electrical.Analog.Sources.SineVoltage wall_voltage(V=120, f =60) annotation (Placement(transformation( extent={{-10,-10},{10,10}}, rotation=270, diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/openmodelica.metadata.json" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/openmodelica.metadata.json" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/openmodelica.metadata.json" 2022-03-10 09:57:42.532144700 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/openmodelica.metadata.json" 2022-03-10 09:57:55.176146302 +0000 @@ -1 +1 @@ -{"path":"ModelicaByExample", "sha":"6044b756548cfb60fd011983b2ab7587fa252089", "support":"fullSupport", "uses":{"Modelica":"3.2.2"}, "version":"0.6.0", "zipfile":"https://github.com/mtiller/ModelicaBook/archive/6044b756548cfb60fd011983b2ab7587fa252089.zip"} +{"path": "ModelicaByExample", "sha": "6044b756548cfb60fd011983b2ab7587fa252089", "support": "fullSupport", "uses": {"Modelica": "4.0.0"}, "version": "0.6.0", "zipfile": "https://github.com/mtiller/ModelicaBook/archive/6044b756548cfb60fd011983b2ab7587fa252089.zip", "extraInfo": "Conversion script /home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om//Resources/Scripts/Conversion/ConvertModelica_from_3.2.3_to_4.0.0.mos was applied"} \ No newline at end of file diff -ur "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/package.mo" "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/package.mo" --- "/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/package.mo" 2022-03-10 09:57:42.532144700 +0000 +++ "converted-libraries/.openmodelica/libraries/ModelicaByExample 0.6.0/package.mo" 2022-03-10 09:57:55.172146303 +0000 @@ -1,4 +1,4 @@ within ; package ModelicaByExample -annotation (version="0.5.0", uses(Modelica(version="3.2.2"))); +annotation (version="0.5.0", uses(Modelica(version= "4.0.0"))); end ModelicaByExample;