en to en_GB translation catalogue (70 entries)

en: A comma separated list of routing rules for policy routing.
en_GB: A comma-separated list of routing rules for policy routing.

en: A list of IPv4 addresses and their prefix length. Multiple addresses can be separated by comma. For example "192.168.1.5/24, 10.1.0.5/24". The addresses are listed in decreasing priority, meaning the first address will be the primary address.
en_GB: A list of IPv4 addresses and their prefix length. Multiple addresses can be separated by a comma. For example "192.168.1.5/24, 10.1.0.5/24". The addresses are listed in decreasing priority, meaning the first address will be the primary address.

en: A list of IPv6 addresses and their prefix length. Multiple addresses can be separated by comma. For example "2001:db8:85a3::8a2e:370:7334/64, 2001:db8:85a3::5/64". The addresses are listed in increasing priority, meaning the last address will be the primary address.
en_GB: A list of IPv6 addresses and their prefix length. Multiple addresses can be separated by a comma. For example "2001:db8:85a3::8a2e:370:7334/64, 2001:db8:85a3::5/64". The addresses are listed in increasing priority, meaning the last address will be the primary address.

en: A list of pairwise encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list. For maximum compatibility leave this property empty.  Each list element may be one of "tkip" or "ccmp".
en_GB: A list of pairwise encryption algorithms which prevents connections to Wi-Fi networks that do not utilise one of the algorithms in the list. For maximum compatibility leave this property empty.  Each list element may be one of "tkip" or "ccmp".

en: A string sent to the DHCP server to identify the local machine which the DHCP server may use to customize the DHCP lease and options. When the property is a hex string ('aa:bb:cc') it is interpreted as a binary client ID, in which case the first byte is assumed to be the 'type' field as per RFC 2132 section 9.14 and the remaining bytes may be an hardware address (e.g. '01:xx:xx:xx:xx:xx:xx' where 1 is the Ethernet ARP type and the rest is a MAC address). If the property is not a hex string it is considered as a non-hardware-address client ID and the 'type' field is set to 0. The special values "mac" and "perm-mac" are supported, which use the current or permanent MAC address of the device to generate a client identifier with type ethernet (01). Currently, these options only work for ethernet type of links. The special value "ipv6-duid" uses the DUID from "ipv6.dhcp-duid" property as an RFC4361-compliant client identifier. As IAID it uses "ipv4.dhcp-iaid" and falls back to "ipv6.dhcp-iaid" if unset. The special value "duid" generates a RFC4361-compliant client identifier based on "ipv4.dhcp-iaid" and uses a DUID generated by hashing /etc/machine-id. The special value "stable" is supported to generate a type 0 client identifier based on the stable-id (see connection.stable-id) and a per-host key. If you set the stable-id, you may want to include the "${DEVICE}" or "${MAC}" specifier to get a per-device key. If unset, a globally configured default is used. If still unset, the default depends on the DHCP plugin.
en_GB: A string sent to the DHCP server to identify the local machine which the DHCP server may use to customise the DHCP lease and options. When the property is a hex string ('aa:bb:cc') it is interpreted as a binary client ID, in which case the first byte is assumed to be the 'type' field as per RFC 2132 section 9.14 and the remaining bytes may be an hardware address (e.g. '01:xx:xx:xx:xx:xx:xx' where 1 is the Ethernet ARP type and the rest is a MAC address). If the property is not a hex string it is considered as a non-hardware-address client ID and the 'type' field is set to 0. The special values "mac" and "perm-mac" are supported, which use the current or permanent MAC address of the device to generate a client identifier with type ethernet (01). Currently, these options only work for ethernet type of links. The special value "ipv6-duid" uses the DUID from "ipv6.dhcp-duid" property as an RFC4361-compliant client identifier. As IAID it uses "ipv4.dhcp-iaid" and falls back to "ipv6.dhcp-iaid" if unset. The special value "duid" generates a RFC4361-compliant client identifier based on "ipv4.dhcp-iaid" and uses a DUID generated by hashing /etc/machine-id. The special value "stable" is supported to generate a type 0 client identifier based on the stable-id (see connection.stable-id) and a per-host key. If you set the stable-id, you may want to include the "${DEVICE}" or "${MAC}" specifier to get a per-device key. If unset, a globally configured default is used. If still unset, the default depends on the DHCP plugin.

en: AP isolation can be set only in AP mode
en_GB: AP isolation can only be set in AP mode

en: Add...
en_GB: Add…

en: Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties. The currently supported options are "attempts", "debug", "edns0", "inet6", "ip6-bytestring", "ip6-dotint", "ndots", "no-check-names", "no-ip6-dotint", "no-reload", "no-tld-query", "rotate", "single-request", "single-request-reopen", "timeout", "trust-ad", "use-vc". The "trust-ad" setting is only honored if the profile contributes name servers to resolv.conf, and if all contributing profiles have "trust-ad" enabled. When using a caching DNS plugin (dnsmasq or systemd-resolved in NetworkManager.conf) then "edns0" and "trust-ad" are automatically added.
en_GB: Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties. The currently supported options are "attempts", "debug", "edns0", "inet6", "ip6-bytestring", "ip6-dotint", "ndots", "no-check-names", "no-ip6-dotint", "no-reload", "no-tld-query", "rotate", "single-request", "single-request-reopen", "timeout", "trust-ad", "use-vc". The "trust-ad" setting is only honoured if the profile contributes name servers to resolv.conf, and if all contributing profiles have "trust-ad" enabled. When using a caching DNS plugin (dnsmasq or systemd-resolved in NetworkManager.conf) then "edns0" and "trust-ad" are automatically added.

en: Array of DNS search domains. Domains starting with a tilde ('~') are considered 'routing' domains and are used only to decide the interface over which a query must be forwarded; they are not used to complete unqualified host names. When using a DNS plugin that supports Conditional Forwarding or Split DNS, then the search domains specify which name servers to query. This makes the behavior different from running with plain /etc/resolv.conf. For more information see also the dns-priority setting.
en_GB: Array of DNS search domains. Domains starting with a tilde ('~') are considered 'routing' domains and are used only to decide the interface over which a query must be forwarded; they are not used to complete unqualified host names. When using a DNS plugin that supports Conditional Forwarding or Split DNS, then the search domains specify which name servers to query. This makes the behaviour different from running with plain /etc/resolv.conf. For more information see also the dns-priority setting.

en: Can not change the connection type
en_GB: Cannot change the connection type

en: Configures AP isolation, which prevents communication between wireless devices connected to this AP. This property can be set to a value different from NM_TERNARY_DEFAULT (-1) only when the interface is configured in AP mode. If set to NM_TERNARY_TRUE (1), devices are not able to communicate with each other. This increases security because it protects devices against attacks from other clients in the network. At the same time, it prevents devices to access resources on the same wireless networks as file shares, printers, etc. If set to NM_TERNARY_FALSE (0), devices can talk to each other. When set to NM_TERNARY_DEFAULT (-1), the global default is used; in case the global default is unspecified it is assumed to be NM_TERNARY_FALSE (0).
en_GB: Configures AP isolation, which prevents communication between wireless devices connected to this AP. This property can be set to a value different from NM_TERNARY_DEFAULT (-1) only when the interface is configured in AP mode. If set to NM_TERNARY_TRUE (1), devices are not able to communicate with each other. This increases security because it protects devices against attacks from other clients in the network. At the same time, it prevents devices to access resources on the same wireless networks as file shares, printers, etc. If set to NM_TERNARY_FALSE (0), devices can talk to each other. When set to NM_TERNARY_DEFAULT (-1), the global default is used; in case the global default is unspecified, it is assumed to be NM_TERNARY_FALSE (0).

en: Could not daemonize: %s [error %u]
en_GB: Could not daemonise: %s [error %u]

en: Couldn't initialize PKCS#12 decoder: %d
en_GB: Couldn't initialise PKCS#12 decoder: %d

en: Couldn't initialize PKCS#12 decoder: %s
en_GB: Couldn't initialise PKCS#12 decoder: %s

en: Couldn't initialize PKCS#8 decoder: %s
en_GB: Couldn't initialise PKCS#8 decoder: %s

en: Couldn't initialize slot
en_GB: Couldn't initialise slot

en: DNS servers priority. The relative priority for DNS servers specified by this setting.  A lower numerical value is better (higher priority). Negative values have the special effect of excluding other configurations with a greater numerical priority value; so in presence of at least one negative priority, only DNS servers from connections with the lowest priority value will be used. To avoid all DNS leaks, set the priority of the profile that should be used to the most negative value of all active connections profiles. Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs (including WireGuard) and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections.  It does not disambiguate multiple DNS servers within the same connection profile. When multiple devices have configurations with the same priority, VPNs will be considered first, then devices with the best (lowest metric) default route and then all other devices. When using dns=default, servers with higher priority will be on top of resolv.conf. To prioritize a given server over another one within the same connection, just specify them in the desired order. Note that commonly the resolver tries name servers in /etc/resolv.conf in the order listed, proceeding with the next server in the list on failure. See for example the "rotate" option of the dns-options setting. If there are any negative DNS priorities, then only name servers from the devices with that lowest priority will be considered. When using a DNS resolver that supports Conditional Forwarding or Split DNS (with dns=dnsmasq or dns=systemd-resolved settings), each connection is used to query domains in its search list. The search domains determine which name servers to ask, and the DNS priority is used to prioritize name servers based on the domain.  Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually).  When multiple connections specify the same domain, the one with the best priority (lowest numerical value) wins.  If a sub domain is configured on another interface it will be accepted regardless the priority, unless parent domain on the other interface has a negative priority, which causes the sub domain to be shadowed. With Split DNS one can avoid undesired DNS leaks by properly configuring DNS priorities and the search domains, so that only name servers of the desired interface are configured.
en_GB: DNS servers priority. The relative priority for DNS servers specified by this setting.  A lower numerical value is better (higher priority). Negative values have the special effect of excluding other configurations with a greater numerical priority value; so in presence of at least one negative priority, only DNS servers from connections with the lowest priority value will be used. To avoid all DNS leaks, set the priority of the profile that should be used to the most negative value of all active connections profiles. Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs (including WireGuard) and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections.  It does not disambiguate multiple DNS servers within the same connection profile. When multiple devices have configurations with the same priority, VPNs will be considered first, then devices with the best (lowest metric) default route and then all other devices. When using dns=default, servers with higher priority will be on top of resolv.conf. To prioritise a given server over another one within the same connection, just specify them in the desired order. Note that commonly the resolver tries name servers in /etc/resolv.conf in the order listed, proceeding with the next server in the list on failure. See for example the "rotate" option of the dns-options setting. If there are any negative DNS priorities, then only name servers from the devices with that lowest priority will be considered. When using a DNS resolver that supports Conditional Forwarding or Split DNS (with dns=dnsmasq or dns=systemd-resolved settings), each connection is used to query domains in its search list. The search domains determine which name servers to ask, and the DNS priority is used to prioritise name servers based on the domain.  Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually).  When multiple connections specify the same domain, the one with the best priority (lowest numerical value) wins.  If a sub domain is configured on another interface it will be accepted regardless the priority, unless parent domain on the other interface has a negative priority, which causes the sub domain to be shadowed. With Split DNS one can avoid undesired DNS leaks by properly configuring DNS priorities and the search domains, so that only name servers of the desired interface are configured.

en: Device LLDP neighbors
en_GB: Device LLDP neighbours

en: Error initializing certificate data: %s
en_GB: Error initialising certificate data: %s

en: Error: Device '%s' was not recognized as a Wi-Fi device, check NetworkManager Wi-Fi plugin.
en_GB: Error: Device '%s' was not recognised as a Wi-Fi device, check the NetworkManager Wi-Fi plug-in.

en: Error: polkit agent initialization failed: %s
en_GB: Error: polkit agent initialisation failed: %s

en: Error: secret agent initialization failed
en_GB: Error: secret agent initialisation failed

en: Failed to finalize decryption of the private key: %d.
en_GB: Failed to finalise decryption of the private key: %d.

en: Failed to initialize the crypto engine.
en_GB: Failed to initialise the crypto engine.

en: Failed to initialize the crypto engine: %d.
en_GB: Failed to initialise the crypto engine: %d.

en: Failed to initialize the decryption cipher context: %s (%s)
en_GB: Failed to initialise the decryption cipher context: %s (%s)

en: Failed to initialize the decryption cipher slot.
en_GB: Failed to initialise the decryption cipher slot.

en: Failed to initialize the decryption context.
en_GB: Failed to initialise the decryption context.

en: Failed to initialize the encryption cipher context: %s (%s)
en_GB: Failed to initialise the encryption cipher context: %s (%s)

en: Failed to initialize the encryption cipher slot.
en_GB: Failed to initialise the encryption cipher slot.

en: Failed to initialize the encryption context.
en_GB: Failed to initialise the encryption context.

en: Failed to recognize certificate
en_GB: Failed to recognise certificate

en: IP configuration method. NMSettingIP4Config and NMSettingIP6Config both support "disabled", "auto", "manual", and "link-local". See the subclass-specific documentation for other values. In general, for the "auto" method, properties such as "dns" and "routes" specify information that is added on to the information returned from automatic configuration.  The "ignore-auto-routes" and "ignore-auto-dns" properties modify this behavior. For methods that imply no upstream network, such as "shared" or "link-local", these properties must be empty. For IPv4 method "shared", the IP subnet can be configured by adding one manual IPv4 address or otherwise 10.42.x.0/24 is chosen. Note that the shared method must be configured on the interface which shares the internet to a subnet, not on the uplink which is shared.
en_GB: IP configuration method. NMSettingIP4Config and NMSettingIP6Config both support "disabled", "auto", "manual", and "link-local". See the subclass-specific documentation for other values. In general, for the "auto" method, properties such as "dns" and "routes" specify information that is added on to the information returned from automatic configuration.  The "ignore-auto-routes" and "ignore-auto-dns" properties modify this behaviour. For methods that imply no upstream network, such as "shared" or "link-local", these properties must be empty. For IPv4 method "shared", the IP subnet can be configured by adding one manual IPv4 address or otherwise 10.42.x.0/24 is chosen. Note that the shared method must be configured on the interface which shares the Internet to a subnet, not on the uplink which is shared.

en: If TRUE, indicates that the network is a non-broadcasting network that hides its SSID. This works both in infrastructure and AP mode. In infrastructure mode, various workarounds are used for a more reliable discovery of hidden networks, such as probe-scanning the SSID.  However, these workarounds expose inherent insecurities with hidden SSID networks, and thus hidden SSID networks should be used with caution. In AP mode, the created network does not broadcast its SSID. Note that marking the network as hidden may be a privacy issue for you (in infrastructure mode) or client stations (in AP mode), as the explicit probe-scans are distinctly recognizable on the air.
en_GB: If TRUE, indicates that the network is a non-broadcasting network that hides its SSID. This works both in infrastructure and AP mode. In infrastructure mode, various workarounds are used for a more reliable discovery of hidden networks, such as probe-scanning the SSID.  However, these workarounds expose inherent insecurities with hidden SSID networks, and thus hidden SSID networks should be used with caution. In AP mode, the created network does not broadcast its SSID. Note that marking the network as hidden may be a privacy issue for you (in infrastructure mode) or client stations (in AP mode), as the explicit probe-scans are distinctly recognisable on the air.

en: If you are creating a VPN, and the VPN connection you wish to create does not appear in the list, you may not have the correct VPN plugin installed.
en_GB: If you are creating a VPN, and the VPN connection you wish to create does not appear in the list, you may not have the correct VPN plug-in installed.

en: Ignore automatically obtained routes
en_GB: Ignore automatically-obtained routes

en: Modem initialization failed
en_GB: Modem initialisation failed

en: NetworkManager monitors all network connections and automatically
    chooses the best connection to use.  It also allows the user to
    specify wireless access points which wireless cards in the computer
    should associate with.
en_GB: NetworkManager monitors all network connections and automatically
    chooses the best connection to use.  It also allows the user to
    specify with which wireless access points the wireless cards in the computer
    should associate.

en: Never use this network for default route
en_GB: Never use this network as the default route

en: One of NM_SETTING_MAC_RANDOMIZATION_DEFAULT (0) (never randomize unless the user has set a global default to randomize and the supplicant supports randomization),  NM_SETTING_MAC_RANDOMIZATION_NEVER (1) (never randomize the MAC address), or NM_SETTING_MAC_RANDOMIZATION_ALWAYS (2) (always randomize the MAC address). This property is deprecated for 'cloned-mac-address'. Deprecated: 1
en_GB: One of NM_SETTING_MAC_RANDOMIZATION_DEFAULT (0) (never randomise unless the user has set a global default to randomise and the supplicant supports randomisation),  NM_SETTING_MAC_RANDOMIZATION_NEVER (1) (never randomise the MAC address), or NM_SETTING_MAC_RANDOMIZATION_ALWAYS (2) (always randomise the MAC address). This property is deprecated for 'cloned-mac-address'. Deprecated: 1

en: One or more flags which control the behavior and features of the VLAN interface.  Flags include NM_VLAN_FLAG_REORDER_HEADERS (0x1) (reordering of output packet headers), NM_VLAN_FLAG_GVRP (0x2) (use of the GVRP protocol), and NM_VLAN_FLAG_LOOSE_BINDING (0x4) (loose binding of the interface to its master device's operating state). NM_VLAN_FLAG_MVRP (0x8) (use of the MVRP protocol). The default value of this property is NM_VLAN_FLAG_REORDER_HEADERS, but it used to be 0. To preserve backward compatibility, the default-value in the D-Bus API continues to be 0 and a missing property on D-Bus is still considered as 0.
en_GB: One or more flags which control the behaviour and features of the VLAN interface.  Flags include NM_VLAN_FLAG_REORDER_HEADERS (0x1) (reordering of output packet headers), NM_VLAN_FLAG_GVRP (0x2) (use of the GVRP protocol), and NM_VLAN_FLAG_LOOSE_BINDING (0x4) (loose binding of the interface to its master device's operating state). NM_VLAN_FLAG_MVRP (0x8) (use of the MVRP protocol). The default value of this property is NM_VLAN_FLAG_REORDER_HEADERS, but it used to be 0. To preserve backward compatibility, the default-value in the D-Bus API continues to be 0 and a missing property on D-Bus is still considered as 0.

en: Open vSwitch DPDK number of rx queues. Defaults to zero which means to leave the parameter in OVS unspecified and effectively configures one queue.
en_GB: Open vSwitch DPDK number of rx queues. Defaults to zero, which means to leave the parameter in OVS unspecified and effectively configures only one queue.

en: PIN code required
en_GB: A PIN code is required

en: Specifies the allowed "phase 2" inner EAP-based authentication method when TTLS is specified in the "eap" property.  Recognized EAP-based "phase 2" methods are "md5", "mschapv2", "otp", "gtc", and "tls". Each "phase 2" inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details.
en_GB: Specifies the allowed "phase 2" inner EAP-based authentication method when TTLS is specified in the "eap" property.  Recognised EAP-based "phase 2" methods are "md5", "mschapv2", "otp", "gtc", and "tls". Each "phase 2" inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details.

en: The autoconnect priority in range -999 to 999. If the connection is set to autoconnect, connections with higher priority will be preferred. The higher number means higher priority. Defaults to 0. Note that this property only matters if there are more than one candidate profile to select for autoconnect. In case of equal priority, the profile used most recently is chosen.
en_GB: The autoconnect priority within the range of -999 to 999. Defaults to 0. A bigger, more positive number means a higher priority. If the connection is set to autoconnect, connections set with the higher priority will be preferred. Note that this property only matters if there is more than one candidate profile to select for autoconnect. In the case of equal priority, the profile used most recently is chosen.

en: The connection was not a ovs_bridge connection.
en_GB: The connection was not an ovs_bridge connection.

en: The connection was not a ovs_interface connection.
en_GB: The connection was not an ovs_interface connection.

en: The connection was not a ovs_port connection.
en_GB: The connection was not an ovs_port connection.

en: The device is lacking capabilities required by the connection.
en_GB: The device lacks capabilities required by the connection.

en: This represents the identity of the connection used for various purposes. It allows to configure multiple profiles to share the identity. Also, the stable-id can contain placeholders that are substituted dynamically and deterministically depending on the context. The stable-id is used for generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-privacy. It is also used to seed the generated cloned MAC address for ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable. It is also used as DHCP client identifier with ipv4.dhcp-client-id=stable and to derive the DHCP DUID with ipv6.dhcp-duid=stable-[llt,ll,uuid]. Note that depending on the context where it is used, other parameters are also seeded into the generation algorithm. For example, a per-host key is commonly also included, so that different systems end up generating different IDs. Or with ipv6.addr-gen-mode=stable-privacy, also the device's name is included, so that different interfaces yield different addresses. The per-host key is the identity of your machine and stored in /var/lib/NetworkManager/secret-key. The '$' character is treated special to perform dynamic substitutions at runtime. Currently, supported are "${CONNECTION}", "${DEVICE}", "${MAC}", "${BOOT}", "${RANDOM}". These effectively create unique IDs per-connection, per-device, per-boot, or every time. Note that "${DEVICE}" corresponds to the interface name of the device and "${MAC}" is the permanent MAC address of the device. Any unrecognized patterns following '$' are treated verbatim, however are reserved for future use. You are thus advised to avoid '$' or escape it as "$$". For example, set it to "${CONNECTION}-${BOOT}-${DEVICE}" to create a unique id for this connection that changes with every reboot and differs depending on the interface where the profile activates. If the value is unset, a global connection default is consulted. If the value is still unset, the default is similar to "${CONNECTION}" and uses a unique, fixed ID for the connection.
en_GB: This represents the identity of the connection used for various purposes. It allows to configure multiple profiles to share the identity. Also, the stable-id can contain placeholders that are substituted dynamically and deterministically depending on the context. The stable-id is used for generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-privacy. It is also used to seed the generated cloned MAC address for ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable. It is also used as DHCP client identifier with ipv4.dhcp-client-id=stable and to derive the DHCP DUID with ipv6.dhcp-duid=stable-[llt,ll,uuid]. Note that depending on the context where it is used, other parameters are also seeded into the generation algorithm. For example, a per-host key is commonly also included, so that different systems end up generating different IDs. Or with ipv6.addr-gen-mode=stable-privacy, also the device's name is included, so that different interfaces yield different addresses. The per-host key is the identity of your machine and stored in /var/lib/NetworkManager/secret-key. The '$' character is treated special to perform dynamic substitutions at runtime. Currently, supported are "${CONNECTION}", "${DEVICE}", "${MAC}", "${BOOT}", "${RANDOM}". These effectively create unique IDs per-connection, per-device, per-boot, or every time. Note that "${DEVICE}" corresponds to the interface name of the device and "${MAC}" is the permanent MAC address of the device. Any unrecognised patterns following '$' are treated verbatim, however are reserved for future use. You are thus advised to avoid '$' or escape it as "$$". For example, set it to "${CONNECTION}-${BOOT}-${DEVICE}" to create a unique id for this connection that changes with every reboot and differs depending on the interface where the profile activates. If the value is unset, a global connection default is consulted. If the value is still unset, the default is similar to "${CONNECTION}" and uses a unique, fixed ID for the connection.

en: UUID needs normalization
en_GB: UUID needs normalisation

en: Unexpected failure to normalize the connection
en_GB: Unexpected failure to normalise the connection

en: Usage: nmcli agent polkit { help }
    
    Registers nmcli as a polkit action for the user session.
    When a polkit daemon requires an authorization, nmcli asks the user and gives
    the response back to polkit.
en_GB: Usage: nmcli agent polkit { help }
    
    Registers nmcli as a polkit action for the user session.
    When a polkit daemon requires an authorisation, nmcli asks the user and gives
    the response back to polkit.

en: Usage: nmcli agent secret { help }
    
    Runs nmcli as NetworkManager secret agent. When NetworkManager requires
    a password it asks registered agents for it. This command keeps nmcli running
    and if a password is required asks the user for it.
en_GB: Usage: nmcli agent secret { help }
    
    Runs nmcli as NetworkManager secret agent. When NetworkManager requires
    a password, it asks registered agents for it. This command keeps nmcli running
    and if a password is required, asks the user for it.

en: Usage: nmcli general permissions { help }
    
    Show caller permissions for authenticated operations.
en_GB: Usage: nmcli general permissions { help }

en: VPN disconnected
en_GB: Disconnected

en: Warning: polkit agent initialization failed: %s
en_GB: Warning: polkit agent initialisation failed: %s

en: When TRUE, setup the interface to accept packets for all MAC addresses. This is enabling the kernel interface flag IFF_PROMISC. When FALSE, the interface will only accept the packets with the interface destination mac address or broadcast.
en_GB: When TRUE, setup the interface to accept packets for all MAC addresses. This is enabling the kernel interface flag IFF_PROMISC. When FALSE, the interface will only accept the packets with the interface destination MAC address or broadcast.

en: Whether or not the connection should be automatically connected by NetworkManager when the resources for the connection are available. TRUE to automatically activate the connection, FALSE to require manual intervention to activate the connection. Autoconnect happens when the circumstances are suitable. That means for example that the device is currently managed and not active. Autoconnect thus never replaces or competes with an already active profile. Note that autoconnect is not implemented for VPN profiles. See "secondaries" as an alternative to automatically connect VPN profiles.
en_GB: Whether or not the connection should be automatically connected by NetworkManager when the resources for the connection are available. TRUE to automatically activate the connection, FALSE to require manual intervention to activate the connection. Autoconnect happens when the circumstances are suitable. That means for example that the device is currently managed and not active. Autoconnect thus never replaces or competes with an already-active profile. Note that autoconnect is not implemented for VPN profiles. See "secondaries" as an alternative to automatically connect VPN profiles.

en: With "cloned-mac-address" setting "random" or "stable", by default all bits of the MAC address are scrambled and a locally-administered, unicast MAC address is created. This property allows to specify that certain bits are fixed. Note that the least significant bit of the first MAC address will always be unset to create a unicast MAC address. If the property is NULL, it is eligible to be overwritten by a default connection setting. If the value is still NULL or an empty string, the default is to create a locally-administered, unicast MAC address. If the value contains one MAC address, this address is used as mask. The set bits of the mask are to be filled with the current MAC address of the device, while the unset bits are subject to randomization. Setting "FE:FF:FF:00:00:00" means to preserve the OUI of the current MAC address and only randomize the lower 3 bytes using the "random" or "stable" algorithm. If the value contains one additional MAC address after the mask, this address is used instead of the current MAC address to fill the bits that shall not be randomized. For example, a value of "FE:FF:FF:00:00:00 68:F7:28:00:00:00" will set the OUI of the MAC address to 68:F7:28, while the lower bits are randomized. A value of "02:00:00:00:00:00 00:00:00:00:00:00" will create a fully scrambled globally-administered, burned-in MAC address. If the value contains more than one additional MAC addresses, one of them is chosen randomly. For example, "02:00:00:00:00:00 00:00:00:00:00:00 02:00:00:00:00:00" will create a fully scrambled MAC address, randomly locally or globally administered.
en_GB: With "cloned-mac-address" setting "random" or "stable", by default all bits of the MAC address are scrambled and a locally-administered, unicast MAC address is created. This property allows to specify that certain bits are fixed. Note that the least significant bit of the first MAC address will always be unset to create a unicast MAC address. If the property is NULL, it is eligible to be overwritten by a default connection setting. If the value is still NULL or an empty string, the default is to create a locally-administered, unicast MAC address. If the value contains one MAC address, this address is used as mask. The set bits of the mask are to be filled with the current MAC address of the device, while the unset bits are subject to randomisation. Setting "FE:FF:FF:00:00:00" means to preserve the OUI of the current MAC address and only randomize the lower 3 bytes using the "random" or "stable" algorithm. If the value contains one additional MAC address after the mask, this address is used instead of the current MAC address to fill the bits that shall not be randomised. For example, a value of "FE:FF:FF:00:00:00 68:F7:28:00:00:00" will set the OUI of the MAC address to 68:F7:28, while the lower bits are randomised. A value of "02:00:00:00:00:00 00:00:00:00:00:00" will create a fully scrambled globally-administered, burnt-in MAC address. If the value contains more than one additional MAC addresses, one of them is chosen randomly. For example, "02:00:00:00:00:00 00:00:00:00:00:00 02:00:00:00:00:00" will create a fully scrambled MAC address, randomly locally or globally administered.

en: add [<setting>.<prop> <value>]  :: add property value
    
    This command appends property value.
    
    Example: nmcli> add ipv4.addresses 192.168.1.1/24
en_GB: add [<setting>.<prop> <value>]  :: add property value
    
    This command appends a property value.
    
    Example: nmcli> add ipv4.addresses 192.168.1.1/24

en: can not set property: %s
en_GB: cannot set property: %s

en: has a UUID that requires normalization
en_GB: has a UUID that requires normalisation

en: name
en_GB: Name

en: pause-autoneg cannot be enabled when setting rx/tx options
en_GB: pause-autoneg cannot be enabled when setting RX/TX options

en: there exists a conflicting plugin (%s) that has the same %s.%s value
en_GB: a conflicting plugin exists (%s) that has the same %s.%s value

en: there exists a conflicting plugin with the same name (%s)
en_GB: a conflicting plugin with the same name exists (%s)

en: unknown error initializing plugin %s
en_GB: unknown error initialising plugin %s

en: unrecognized line at %s:%zu
en_GB: unrecognised line at %s:%zu

en: value of type '%s' is invalid or out of range for property '%s'
en_GB: value of type '%s' is invalid or out-of-range for property '%s'
