modelOpeningAreaSashDIN4108

Specified DIN/TS 4108-8: Valid for different opening types

Extends from AixLib.Airflow.WindowVentilation.BaseClasses.PartialOpeningAreaSash (Window opening area, sash opening).

Information

This model determines the window opening area according to DIN/TS 4108-8:2022-09.

All common window opening types can be applied.

Input port of this model is the opening width.

Parameters

TypeNameDefaultDescription
Modelica.Units.SI.LengthwinClrWidth (from PartialOpeningArea)Width of the window clear opening
Modelica.Units.SI.HeightwinClrHeight (from PartialOpeningArea)Height of the window clear opening
Booleanuse_opnWidth_in (from PartialOpeningArea)trueUse input port for window sash opening width
Modelica.Units.SI.LengthprescribedOpnWidth (from PartialOpeningArea)0Fixed value of prescribed opening width
Modelica.Units.SI.AreaAClrOpn (from PartialOpeningArea)winClrWidth*winClrHeightWindow clear opening area
AixLib.Airflow.WindowVentilation.BaseClasses.Types.WindowOpeningTypesopnTyp (from PartialOpeningAreaSash)AixLib.Airflow.WindowVentilation.BaseClasses.Types.WindowOpeningTypes.BottomHungInwardWindow opening type
Modelica.Units.SI.ThicknesssWinSas0Window sash thickness (depth)

Connectors

TypeNameDefaultDescription
Modelica.Blocks.Interfaces.RealInputopnWidth_in (from PartialOpeningArea)Conditional input port for window sash opening width
Modelica.Blocks.Interfaces.RealOutputA (from PartialOpeningArea)Output port for window opening area, must be defined by extended model
Modelica.Blocks.Interfaces.RealOutputopnWidth_internal (from PartialOpeningArea)Internal port to connect to opnWidth_in or prescribedOpnWidth

Components

TypeNameDefaultDescription
Modelica.Units.SI.AngleopnAng (from PartialOpeningAreaSash)if (opnTyp == AixLib.Airflow.WindowVentilation.BaseClasses.Types.WindowOpeningTypes.SideHungInward or opnTyp == AixLib.Airflow.WindowVentilation.BaseClasses.Types.WindowOpeningTypes.SideHungOutward) then AixLib.Airflow.WindowVentilation.BaseClasses.Functions.OpeningAreaHinged.WidthToAngle(winClrHeight, winClrWidth, opnWidth_internal) else if (opnTyp == AixLib.Airflow.WindowVentilation.BaseClasses.Types.WindowOpeningTypes.TopHungOutward or opnTyp == AixLib.Airflow.WindowVentilation.BaseClasses.Types.WindowOpeningTypes.BottomHungInward) then AixLib.Airflow.WindowVentilation.BaseClasses.Functions.OpeningAreaHinged.WidthToAngle(winClrWidth, winClrHeight, opnWidth_internal) else if (opnTyp == AixLib.Airflow.WindowVentilation.BaseClasses.Types.WindowOpeningTypes.PivotVertical) then AixLib.Airflow.WindowVentilation.BaseClasses.Functions.OpeningAreaHinged.WidthToAngle(winClrHeight, winClrWidth/2, opnWidth_internal) else if (opnTyp == AixLib.Airflow.WindowVentilation.BaseClasses.Types.WindowOpeningTypes.PivotHorizontal) then AixLib.Airflow.WindowVentilation.BaseClasses.Functions.OpeningAreaHinged.WidthToAngle(winClrWidth, winClrHeight/2, opnWidth_internal) else 0Window sash opening angle

Revisions

  • June 14, 2024, by Jun Jiang:
    First implementation (see issue 1492)