modelOpeningAreaSashVDI2078

Specified VDI 2078: Only valid for bottom-hung inwards opening

Extends from AixLib.Airflow.WindowVentilation.BaseClasses.PartialOpeningAreaSash (Window opening area, sash opening).

Information

This model determines the window opening area according to VDI 2078:2015-06.

Only bottom-hung openings can be applied.

Input port of this model is the opening width.

Parameters

TypeNameDefaultDescription
Modelica.Units.SI.LengthwinClrWidth (from PartialOpeningArea)Width of the window clear opening
Modelica.Units.SI.HeightwinClrHeight (from PartialOpeningArea)Height of the window clear opening
Booleanuse_opnWidth_in (from PartialOpeningArea)trueUse input port for window sash opening width
Modelica.Units.SI.LengthprescribedOpnWidth (from PartialOpeningArea)0Fixed value of prescribed opening width
Modelica.Units.SI.AreaAClrOpn (from PartialOpeningArea)winClrWidth*winClrHeightWindow clear opening area
AixLib.Airflow.WindowVentilation.BaseClasses.Types.WindowOpeningTypesopnTyp (from PartialOpeningAreaSash)AixLib.Airflow.WindowVentilation.BaseClasses.Types.WindowOpeningTypes.BottomHungInwardWindow opening type
Modelica.Units.SI.HeightheightRevToFrm0.1Vertical distance (height) between the reveal above the window and window top frame
Modelica.Units.SI.ThicknesssWinSas0Window sash thickness (depth)

Connectors

TypeNameDefaultDescription
Modelica.Blocks.Interfaces.RealInputopnWidth_in (from PartialOpeningArea)Conditional input port for window sash opening width
Modelica.Blocks.Interfaces.RealOutputA (from PartialOpeningArea)Output port for window opening area, must be defined by extended model
Modelica.Blocks.Interfaces.RealOutputopnWidth_internal (from PartialOpeningArea)Internal port to connect to opnWidth_in or prescribedOpnWidth

Components

TypeNameDefaultDescription
Modelica.Units.SI.AngleopnAng (from PartialOpeningAreaSash)if (opnTyp == AixLib.Airflow.WindowVentilation.BaseClasses.Types.WindowOpeningTypes.SideHungInward or opnTyp == AixLib.Airflow.WindowVentilation.BaseClasses.Types.WindowOpeningTypes.SideHungOutward) then AixLib.Airflow.WindowVentilation.BaseClasses.Functions.OpeningAreaHinged.WidthToAngle(winClrHeight, winClrWidth, opnWidth_internal) else if (opnTyp == AixLib.Airflow.WindowVentilation.BaseClasses.Types.WindowOpeningTypes.TopHungOutward or opnTyp == AixLib.Airflow.WindowVentilation.BaseClasses.Types.WindowOpeningTypes.BottomHungInward) then AixLib.Airflow.WindowVentilation.BaseClasses.Functions.OpeningAreaHinged.WidthToAngle(winClrWidth, winClrHeight, opnWidth_internal) else if (opnTyp == AixLib.Airflow.WindowVentilation.BaseClasses.Types.WindowOpeningTypes.PivotVertical) then AixLib.Airflow.WindowVentilation.BaseClasses.Functions.OpeningAreaHinged.WidthToAngle(winClrHeight, winClrWidth/2, opnWidth_internal) else if (opnTyp == AixLib.Airflow.WindowVentilation.BaseClasses.Types.WindowOpeningTypes.PivotHorizontal) then AixLib.Airflow.WindowVentilation.BaseClasses.Functions.OpeningAreaHinged.WidthToAngle(winClrWidth, winClrHeight/2, opnWidth_internal) else 0Window sash opening angle
Modelica.Units.SI.HeighteffHeightEffective height for the thermal updraft
Modelica.Units.SI.HeightovlHeightHeight of the overlap between window frame and casement
RealcorRevCorrection factor of the window reveal

Revisions

  • June 14, 2024, by Jun Jiang:
    First implementation (see issue 1492)