recordChildrensPool
Pool which is mainly used by children
Extends from AixLib.DataBase.Pools.IndoorSwimmingPoolBaseDataDefinition.
Information
The swimming pool "ChildrensPool" describes a typical indoor swimming pool, which is mainly used by children and to teach children swimming.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.Temperature | TPool (from IndoorSwimmingPoolBaseDataDefinition) | Set water temperature of swimming pool | |
| Modelica.Units.SI.Volume | VPool (from IndoorSwimmingPoolBaseDataDefinition) | Volume of pool water | |
| Modelica.Units.SI.Area | APool (from IndoorSwimmingPoolBaseDataDefinition) | Area of water surface of swimming pool | |
| Modelica.Units.SI.Length | depthPool (from IndoorSwimmingPoolBaseDataDefinition) | Average depth of swimming pool | |
| Modelica.Units.SI.Volume | VSto (from IndoorSwimmingPoolBaseDataDefinition) | Usable Volume of water storage, DIN 19643-1 | |
| Modelica.Units.SI.VolumeFlowRate | V_flow_nominal (from IndoorSwimmingPoolBaseDataDefinition) | Circulation volume flow rate | |
| Modelica.Units.SI.VolumeFlowRate | V_flow_par (from IndoorSwimmingPoolBaseDataDefinition) | In the case of partial load: circulation volume flow rate during non-opening hours, DIN 19643-1 | |
| Boolean | use_parLoa (from IndoorSwimmingPoolBaseDataDefinition) | false | Partial load operation implemented for non opening hours? |
| Modelica.Units.SI.PressureDifference | dpHeaExcPool (from IndoorSwimmingPoolBaseDataDefinition) | Pressure drop of heat exchanger, should be zero for an indeal heated pool | |
| Boolean | use_ideHeaExc (from IndoorSwimmingPoolBaseDataDefinition) | true | Include an ideal heat exchanger into the circulation system |
| Real | KHeat (from IndoorSwimmingPoolBaseDataDefinition) | Gain of controller for ideal heater | |
| Modelica.Units.SI.Time | timeHea (from IndoorSwimmingPoolBaseDataDefinition) | Time constant of Integrator block for ideal heater | |
| Real | QMaxHeat (from IndoorSwimmingPoolBaseDataDefinition) | Upper limit of output for ideal heater | |
| Real | QMinHeat (from IndoorSwimmingPoolBaseDataDefinition) | Lower limit of output for ideal heater | |
| Real | betaInUse (from IndoorSwimmingPoolBaseDataDefinition) | Water transfer coefficient during opening hours if pool is used, VDI 2089 | |
| Boolean | use_poolCov (from IndoorSwimmingPoolBaseDataDefinition) | false | Pool covered during non opening hours |
| Boolean | use_watRec (from IndoorSwimmingPoolBaseDataDefinition) | false | Recycled water used for refilling pool water? |
| Real | x_rec (from IndoorSwimmingPoolBaseDataDefinition) | Percentage of refilling water provided by recycled pool water, DIN 19643-1: <= 0,8 | |
| Modelica.Units.SI.MassFlowRate | m_flow_out (from IndoorSwimmingPoolBaseDataDefinition) | Waterexchange due to people in the pool, DIN 19643-1 | |
| Boolean | use_HRS (from IndoorSwimmingPoolBaseDataDefinition) | false | Is a heat recovery system physically integrated? |
| Modelica.Units.SI.Efficiency | etaHRS (from IndoorSwimmingPoolBaseDataDefinition) | Effieciency of heat recovery system | |
| Boolean | use_wavPool (from IndoorSwimmingPoolBaseDataDefinition) | false | Is there a wave machine installed? |
| Modelica.Units.SI.Length | heiWav (from IndoorSwimmingPoolBaseDataDefinition) | Height of generated wave | |
| Modelica.Units.SI.Length | widWav (from IndoorSwimmingPoolBaseDataDefinition) | Width of generated wave/ width of wave machineoutlet | |
| Modelica.Units.SI.Time | timeWavPul_start (from IndoorSwimmingPoolBaseDataDefinition) | Start time of first wave cycle | |
| Modelica.Units.SI.Time | perWavPul (from IndoorSwimmingPoolBaseDataDefinition) | Time of cycling period | |
| Real | widWavPul (from IndoorSwimmingPoolBaseDataDefinition) | Fraction of time of wave generation within cycling period | |
| Modelica.Units.SI.Area | AWalInt (from IndoorSwimmingPoolBaseDataDefinition) | Area of pool walls which is connected to inner rooms (inner pool walls) | |
| Modelica.Units.SI.Area | AWalExt (from IndoorSwimmingPoolBaseDataDefinition) | Area of pool walls which is connected to the ground (pool wall with earth contact) | |
| Modelica.Units.SI.Area | AFloInt (from IndoorSwimmingPoolBaseDataDefinition) | Area of pool floors which is connected to inner rooms (inner pool floor) | |
| Modelica.Units.SI.Area | AFloExt (from IndoorSwimmingPoolBaseDataDefinition) | Area of pool floors which is connected to teh ground (pool floor with earth contact) | |
| Modelica.Units.SI.CoefficientOfHeatTransfer | hConWatHor (from IndoorSwimmingPoolBaseDataDefinition) | Mean value for the heat transfer coefficient of free convection on horizontal pool floors | |
| Modelica.Units.SI.CoefficientOfHeatTransfer | hConWatVer (from IndoorSwimmingPoolBaseDataDefinition) | Mean value for the heat transfer coefficient of free convection on vertical pool walls |