Model that tests the reverse flow for a humidifier
This model tests whether the results for a humidifer are
identical for forward flow and reverse flow.
Contents
-
September 20, 2020, by Michael Wetter:
Updated model to use one port temperature sensor from Modelica Standard Library.
This is for
#1399.
-
May 2, 2019, by Jianjun Hu:
Replaced fluid source. This is for
#1072.
-
April 12, 2017, by Michael Wetter:
Removed temperature connection that is no longer needed.
This is for issue
Buildings #704.
-
November 2, 2016, by Michael Wetter:
Changed assertions to blocks that compute the difference,
and added the difference to the regression results.
This is for
issue 564.
-
October 9, 2013, by Michael Wetter:
Replaced
Modelica.Fluid.Sources.FixedBoundary
with
AixLib.Fluid.Sources.FixedBoundary
as otherwise, the pedantic model check fails in
Dymola 2014 FD01 beta3.
-
July 5, 2013, by Michael Wetter:
Changed one instance of Modelica.Fluid.Sources.MassFlowSource_T,
that was connected to the two fluid streams,
to two instances, each having half the mass flow rate.
This is required for the model to work with Modelica 3.2.1 due to the
change introduced in
ticket #739.
-
August 19, 2010, by Michael Wetter:
First implementation based on a model from Giuliano Fontanella.
Generated at 2026-02-22T19:13:52Z
by OpenModelicaOpenModelica 1.26.2 using GenerateDoc.mos