modelDpVar
Extends from DpConst.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.MassFlowRate | m_flow_nominal (from DpConst) | 1.0 | Nominal mass flow rate |
| Modelica.Units.SI.MassFlowRate | m_flow_nominal_max (from DpConst) | 2*m_flow_nominal | To describe max point of mover's characteristic curve. |
| Modelica.Units.SI.PressureDifference | dp_nominal (from DpConst) | 100000 | Nominal pressure raise, used to normalized the filter if use_inputFilter=true, to set default values of constantHead and heads, and and for default pressure curve if not specified in record per |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealOutput | elEnergy (from DpConst) | Cumulated electrical power |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| AixLib.Fluid.Sources.Boundary_pT | sou (from DpConst) | ||
| AixLib.Fluid.Actuators.Valves.TwoWayLinear | val (from DpConst) | Pressure drop | |
| AixLib.Fluid.Sensors.MassFlowRate | masFloRat (from DpConst) | ||
| AixLib.Fluid.Movers.DpControlledMovers.DpControlled_dp | dpControlled_dp (from DpConst) | ||
| AixLib.Fluid.FixedResistances.PressureDrop | dp (from DpConst) | Pressure drop | |
| Modelica.Blocks.Sources.Ramp | rampValve (from DpConst) | ||
| AixLib.Fluid.Delays.DelayFirstOrder | vol (from DpConst) | ||
| Modelica.Thermal.HeatTransfer.Sources.FixedTemperature | fixedTemperature (from DpConst) | ||
| Modelica.Blocks.Continuous.Integrator | integrator (from DpConst) |