modelActuatorSignal
Partial model that implements the filtered opening for valves and dampers
Information
This model implements the filter that is used to approximate the travel
time of the actuator.
Models that extend this model use the signal
y_actual to obtain the
current position of the actuator.
See Annex60.Fluid.Actuators.UsersGuide for a description of the filter.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Dynamics › Filtered opening | |||
| Boolean | filteredOpening | true | = true, if opening is filtered with a 2nd order CriticalDamping filter |
| Modelica.SIunits.Time | riseTime | 120 | Rise time of the filter (time to reach 99.6 % of an opening step) |
| Modelica.Blocks.Types.Init | init | Modelica.Blocks.Types.Init.InitialOutput | Type of initialization (no init/steady state/initial state/initial output) |
| Real | y_start | 1 | Initial value of output |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealInput | y | Actuator position (0: closed, 1: open) | |
| Modelica.Blocks.Interfaces.RealOutput | y_actual | Actual valve position |
Revisions
-
February 14, 2012 by Michael Wetter:
First implementation.