.Annex60.Fluid.FMI .Annex60.Fluid.FMI
This package contains blocks that serve as containers for exporting
models from Annex60.Fluid as a Functional Mockup Unit (FMU).
This allows using models from Annex60.Fluid, add them
to a block that only has input and output signals, but no acausal connectors,
and then export the model as a Functional Mockup Unit.
Models can be individual models or systems that are composed of various
models.
For more information, see the
User's Guide.
| Name | Description |
|---|---|
 UsersGuide | User's Guide |
 FlowSplitter_u | Model of a flow splitter that can be exported as an FMU |
 Sink_T | Model of a sink with temperature for reverse flow as an input that can be exported as an FMU |
 Source_T | Model of a boundary with mass flow rate, pressure and temperature as an input that can be exported as an FMU |
 Adaptors | Package with adaptors to connect models with fluid ports and models with signal ports |
 Conversion | Package with blocks that convert between different connectors |
 ExportContainers | Package with containers to export thermofluid flow models |
 Validation | Collection of validation models |
 Interfaces | Package with interfaces for models that serves as an FMU container |
 BaseClasses | Package with base classes for Annex60.Fluid.FMI |