modelFlowJunctionSteadyStateNoPressureDrop
Test model for the three way splitter/mixer model configured as steady-state
Extends from Modelica.Icons.Example (Icon for runnable examples).
Information
This model validates the use of the splitter and mixer model for different flow directions. The example is configured such that the flow changes its direction in each flow leg between t = 0 seconds to t = 100 seconds. The splitter model has been configured as a steady-state model, with no flow resistance.
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Annex60.Fluid.FixedResistances.Junction | spl | Splitter | |
| Annex60.Fluid.Sources.MassFlowSource_T | bou1 | Mass flow boundary condition | |
| Annex60.Fluid.Sources.Boundary_pT | bou2 | Pressure boundary condition | |
| Annex60.Fluid.Sources.MassFlowSource_T | bou3 | Mass flow boundary condition | |
| Modelica.Blocks.Sources.Ramp | m1_flow | Ramp mass flow signal | |
| Modelica.Blocks.Sources.Ramp | m3_flow | Ramp mass flow signal | |
| Annex60.Fluid.Sensors.TemperatureTwoPort | senTem1 | Temperature sensor | |
| Annex60.Fluid.Sensors.TemperatureTwoPort | senTem2 | Temperature sensor | |
| Annex60.Fluid.Sensors.TemperatureTwoPort | senTem3 | Temperature sensor |
Contents
| Name | Description |
|---|---|
 Medium | Medium model |
Revisions
-
October 14, 2016, by Michael Wetter:
First implementation.
This is for issue 451.