.Annex60.Fluid.HeatExchangers.ActiveBeams.Examples.HeatingOnly

Information

This example tests the implementation of Annex60.Fluid.HeatExchangers.ActiveBeams.CoolingAndHeating, but operates it only in heating mode. An air volume is maintained at a temperature above 22ˆC by a controller that regulates the water flow rate in the active beam.

Contents

NameDescription
 MediumAMedium model for air
 MediumWMedium model for water

Revisions


Generated at 2025-03-05T19:25:09Z by OpenModelicaOpenModelica 1.24.5 using GenerateDoc.mos