| Boolean | use_T_in (from Humidifier_u) | false | Get the temperature from the input connector |
| Modelica.SIunits.Temperature | T (from Humidifier_u) | 293.15 | Temperature of water that is added to the fluid stream (used if use_T_in=false) |
| Modelica.SIunits.MassFlowRate | mWat_flow_nominal (from Humidifier_u) | | Water mass flow rate at u=1, positive for humidification |
| Assumptions |
| Boolean | allowFlowReversal (from PartialTwoPort) | true | = false to simplify equations, assuming, but not enforcing, no flow reversal |
| Nominal condition |
| Modelica.SIunits.MassFlowRate | m_flow_nominal (from PartialTwoPortInterface) | | Nominal mass flow rate |
| Modelica.SIunits.PressureDifference | dp_nominal (from TwoPortFlowResistanceParameters) | | Pressure difference |
| Advanced |
| Modelica.SIunits.MassFlowRate | m_flow_small (from PartialTwoPortInterface) | 1E-4*abs(m_flow_nominal) | Small mass flow rate for regularization of zero flow |
| Boolean | homotopyInitialization (from TwoPortHeatMassExchanger) | true | = true, use homotopy method |
| Advanced › Diagnostics |
| Boolean | show_T (from PartialTwoPortInterface) | false | = true, if actual temperature at port is computed |
| Flow resistance |
| Boolean | computeFlowResistance (from TwoPortFlowResistanceParameters) | true | =true, compute flow resistance. Set to false to assume no friction |
| Boolean | from_dp (from TwoPortFlowResistanceParameters) | false | = true, use m_flow = f(dp) else dp = f(m_flow) |
| Boolean | linearizeFlowResistance (from TwoPortFlowResistanceParameters) | false | = true, use linear relation between m_flow and dp for any flow rate |
| Real | deltaM (from TwoPortFlowResistanceParameters) | 0.1 | Fraction of nominal flow rate where flow transitions to laminar |
| Dynamics › Nominal condition |
| Modelica.SIunits.Time | tau (from TwoPortHeatMassExchanger) | 30 | Time constant at nominal flow (if energyDynamics <> SteadyState) |
| Dynamics › Equations |
| Modelica.Fluid.Types.Dynamics | energyDynamics (from TwoPortHeatMassExchanger) | Modelica.Fluid.Types.Dynamics.DynamicFreeInitial | Type of energy balance: dynamic (3 initialization options) or steady state |
| Modelica.Fluid.Types.Dynamics | massDynamics (from TwoPortHeatMassExchanger) | energyDynamics | Type of mass balance: dynamic (3 initialization options) or steady state |
| Initialization |
| Medium.AbsolutePressure | p_start (from TwoPortHeatMassExchanger) | Medium.p_default | Start value of pressure |
| Medium.Temperature | T_start (from TwoPortHeatMassExchanger) | Medium.T_default | Start value of temperature |
| Medium.MassFraction[Medium.nX] | X_start (from TwoPortHeatMassExchanger) | Medium.X_default | Start value of mass fractions m_i/m |
| Medium.ExtraProperty[Medium.nC] | C_start (from TwoPortHeatMassExchanger) | fill(0, Medium.nC) | Start value of trace substances |
