modelTraceSubstanceConservation
This test checks if trace substance mass flow rates are conserved
Extends from Modelica.Icons.Example (Icon for runnable examples).
Information
This model is reconfigured to a steady state or dynamic check for conservation of trace substances.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| String | substanceName | "CO2" |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Annex60.Fluid.Sources.MassFlowSource_h | sou | Air source with moisture and trace substances | |
| Annex60.Fluid.MixingVolumes.MixingVolumeMoistAir | vol | Mixing volume for adding moisture | |
| Modelica.Blocks.Sources.Constant | TWat | Water supply temperature | |
| Modelica.Blocks.Sources.Constant | mWatFlo | Water mass flow rate | |
| Annex60.Fluid.Sensors.TraceSubstancesTwoPort | senTraSubIn | Measured inlet trace substance concentration | |
| Annex60.Fluid.Sensors.TraceSubstancesTwoPort | senTraSubOut | Measured outlet trace substance concentration | |
| Annex60.Fluid.Sources.Boundary_pT | sin | Air sink | |
| Sensors.MassFlowRate | senMasFloIn | Fluid mass flow rate at inlet | |
| Sensors.MassFlowRate | senMasFloOut | Fluid mass flow rate at outlet | |
| Modelica.Blocks.Math.Product | CfloIn | Trace substance mass flow rate at inlet | |
| Modelica.Blocks.Math.Product | CfloOut | Trace substance mass flow rate at outlet |
Contents
| Name | Description |
|---|---|
 Medium |
Revisions
-
May 22 2015 by Filip Jorissen:
First implementation.