Two flow machines in series
This example tests the configuration of two flow machines that are
installed in series. Both flow machines start with full speed. At
t=150 seconds, the speed of the flow machine on the left is
reduced to zero. As its speed is reduced, the mass flow rate is
reduced. Note that even at zero input, the mass flow rate is
non-zero, but the pressure drop of the pump floMac1.dp
is positive, which means that this pump has a flow resistance.
However, flowMac2.dp is always negative, as this pump
has a constant control input of 1.
Contents
- April 2, 2015, by Filip Jorissen:
Set constant speed for pump using a parameter instead
of a realInput.
- May 29, 2014, by Michael Wetter:
Removed undesirable annotation Evaluate=true.
- February 14, 2012, by Michael Wetter:
Added filter for start-up and shut-down transient.
- March 24 2010, by Michael Wetter:
First implementation.
Generated at 2026-03-31T18:29:59Z by OpenModelicaOpenModelica 1.26.3 using
GenerateDoc.mos
.Annex60.Fluid.Movers.Examples.PumpsSeries
Medium