modelPPM
Test model for the extra property sensor outputting PPM
Extends from Modelica.Icons.Example (Icon for runnable examples).
Information
This example tests the sensors that measure trace substances using an output in parts per million. Various configurations with and without flow reversal and with or without dynamics are tested.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.SIunits.MassFlowRate | m_flow_nominal | volDyn.V*senPPMTwoPort.tau*3*rho_default | Mass flow rate into and out of the volume |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Annex60.Fluid.MixingVolumes.MixingVolume | volDyn | Mixing volume with dynamics | |
| Annex60.Fluid.Sources.MassFlowSource_T | mSou | Fresh air supply | |
| Annex60.Fluid.Sources.FixedBoundary | sin | Exhaust air | |
| Annex60.Fluid.Sensors.PPM | senPPMVol | PPM sensor for mixing volume | |
| Modelica.Blocks.Sources.Constant | CO2In | CO2 mass flow rate entering mixing volume | |
| Annex60.Fluid.Sensors.PPMTwoPort | senPPMTwoPort | PPM sensor | |
| Annex60.Fluid.Sensors.PPM | senPPMIn | PPM sensor for inlet | |
| Annex60.Fluid.Sensors.PPMTwoPort | senPPMNoRev | PPM sensor without flow reversal disabled | |
| Annex60.Fluid.Sensors.PPMTwoPort | senPPMRev | PPM sensor with flow in reverse direction | |
| Annex60.Fluid.Sensors.PPMTwoPort | senPPMSta | Static PPM sensor | |
| Annex60.Fluid.MixingVolumes.MixingVolume | volSte | Mixing volume without dynamics | |
| Annex60.Fluid.Sensors.PPM | senPPMVol2 | PPM sensor for mixing volume | |
| Annex60.Fluid.Sources.MassFlowSource_T | mSouSta | Fresh air supply for steady state volume |
Contents
| Name | Description |
|---|---|
 Medium | Medium model |
Revisions
-
January 12, 2016, by Filip Jorissen:
First implementation. See issue #372