.Annex60.Fluid.Sensors.RelativePressure

Information

The relative pressure port_a.p - port_b.p is determined between the two ports of this component and is provided as output signal. The sensor should be connected in parallel with other equipment, no flow through the sensor is allowed.

Contents

Name	Description
Medium	Medium in the sensor

Revisions

• February 19, 2016, by Michael Wetter:
  Corrected the quantity of the output signal from Pressure to PressureDifference. This was needed for the model Annex60.Fluid.Movers.FlowControlled_m_flow when revising it for issue 417.
• September 29, 2009, by Michael Wetter:
  First implementation, based on Modelica.Fluid.