.BondLib.Electrical.Analog.Semiconductors.Utilities.JunctionCapacitor

Information

The model also computes the diodic current through the junction and puts it out as an output signal.

Parameters:

 Is:    Transport saturation current (default value = 1e-16 Amp)

 Tau:   Ideal transit time (default value = 5e-9 sec)

 Cj:    Zero bias depletion capacitance (default value = 0.5e-12 F)

 Phi:   Diffusion voltage (default value = 0.8 Volt)

 M:     Gradation exponent (default value = 0.333)

 Gb:    Leakage conductance (default value = 1e-15 Mho)

 Vt:    Thermal voltage (default value = 0.02585 Volt)

 EMin:  Minimum exponent (default value = -100)

 EMax:  Maximum exponent (default value = 40)