modelTestOrNor

Test circuit to evaluate performance of OR/NOR gate

Information

This is a model of a commercial OR/NOR gate built from thirteen vertically diffused NPN bipolar transistors [1: p.244].


Experimentation:

Simulate the model during 30 microseconds. Plot the two input voltages, vA and vB, together with the two output voltages, vOR and vNOR, on a single plot.


Simulation Results:

We expect the following results:


References:

  1. Cellier, F.E. (1991), Continuous System Modeling, Springer-Verlag, New York, ISBN: 0-387-97502-0, 755 p.

Components

TypeNameDefaultDescription
Modelica.SIunits.VoltagevAFirst input voltage
Modelica.SIunits.VoltagevBSecond input voltage
Modelica.SIunits.VoltagevORFirst output voltage
Modelica.SIunits.VoltagevNORSecond output voltage
Modelica.SIunits.HeatFlowRatePthTotal heat dissipated by OR/NOR gate
Electrical.Analog.Spice.RampingSources.trapVVb
Electrical.Analog.Spice.RampingSources.trapVVa
Electrical.Analog.Spice.RampingSources.VVee
Electrical.Analog.Spice.RampingSources.VVee1
Electrical.Analog.Basic.GroundGnd1
Electrical.Analog.Basic.GroundGnd2
Electrical.Analog.Basic.GroundGnd3
Electrical.Analog.Basic.GroundGnd4
Electrical.Analog.Sensors.VoltageSensorVor
Electrical.Analog.Sensors.VoltageSensorVnor
Electrical.Analog.Basic.GroundGnd5
Electrical.Analog.Basic.GroundGnd6
OrNorOrNor1
Thermal.HeatTransfer.Sensors.HeatFlowSensorQtot
Thermal.HeatTransfer.Sources.FixedTemperatureFixedTemperature1