| Modelica.SIunits.Entropy | k | Modelica.Constants.k | Boltzmann's constant |
| Modelica.SIunits.ElectricCharge | q | 1.6021892e-19 | Electron charge |
| Real | GapC1 | 7.02E-4 | First bandgap correction factor Silicon |
| Modelica.SIunits.Temperature | GapC2 | 1108.0 | Second bandgap correction factor Silicon |
| Integer | Level | 1 | JFET modeling level (check documentation layer for details) |
| Modelica.SIunits.Temperature | Tnom | 300.15 | Reference temperature |
| Modelica.SIunits.Voltage | VT0 | 0 | Threshold voltage at reference temperature |
| Real | TCV | 0 | Linear temperature coefficient of threshold voltage |
| Modelica.SIunits.Current | IS | 1.e-14 | Transport saturation current |
| Modelica.SIunits.Voltage | EG | if Level == 3 then 0.73 else 1.11 | Energy gap for temperature effect on saturation current at 0 K |
| Real | N | 1 | Current emission coefficient |
| Real | XTI | if Level == 3 then 2 else 3 | Saturation current temperature exponent |
| Modelica.SIunits.Voltage | PB | 0.8 | Built-in potential at reference temperature |
| Modelica.SIunits.Capacitance | CGS | 0.5e-12 | Zero-bias gate-source depletion capacitance at reference temperature |
| Modelica.SIunits.Capacitance | CGD | 0.5e-12 | Zero-bias gate-drain depletion capacitance at reference temperature |
| Real | M | if Level == 3 then 0.5 else 0.33 | Junction grading coefficient |
| Real | FC | 0.5 | Factor for linearization of depletion capacitance formula |
| Modelica.SIunits.Time | TT | 5e-9 | Ideal transit time |
| Modelica.SIunits.InversePotential | ALPHA | 1 | Hyperbolic tangient fitting parameter |
| Modelica.SIunits.Voltage | DELTA | 0.2 | Voltage range for transition |
| Modelica.SIunits.Voltage | VMAX | 0.5 | Limit voltage for carrier velocity saturation |
| Modelica.SIunits.Conductance | GminDC | 1e-16 | Leakage conductance |
| Real | Area | 1 | Relative area occupied by capacitor |
| Boolean | GS | true | True if gate-source junction |
| Real | EMin | -100 | if x < EMin, the exp(x) function is linearized |
| Real | EMax | 40 | if x > EMax, the exp(x) function is linearized |
