modelHeatBranch
Branching of heat depending on a whether port n2 is connected
Information
This is a special heating switch used to check whether anything is connected from the outside to the connector n2. If this is the case, the switch should be in the p-n2 position. If this is not the case, the switch should be in the p-n1 position.Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.BooleanInput | control | true => p--n2 connected, false => p--n1 connected | |
| Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a | p | Positive thermal connector | |
| Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_b | n1 | First negative thermal connector | |
| Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_b | n2 | Second negative thermal connector |