.BuildSysPro.BuildingStock.Utilities.Records.BuildingData.CollectiveHousing.BuildingDataGAUGUIN.Gauguin2012_MTD

Information

Record of Gauguin collective housing settings according to the date of construction

Hypothesis and equations

none

Bibliography

none

Instructions for use

none

Known limits / Use precautions

Warning : thermal bridges have been set to null because of a lack of data, it will be necessary to complete them when more details are available.

Validations

Validated model - Benoît Charrier 12/2015

--------------------------------------------------------------
Licensed by EDF under a 3-clause BSD-license
Copyright © EDF 2009 - 2023
BuildSysPro version 3.6.0
Author : Benoît CHARRIER, EDF (2015)
--------------------------------------------------------------

Definition

record Gauguin2012_MTD = BuildSysPro.BuildingStock.Utilities.Records.BuildingData.CollectiveHousing.BuildingDataGAUGUIN.BuildingType(UvitrageAF = 1.5, redeclare parameter WallData.CollectiveHousing.IntermediateFloor PlancherInterm, redeclare parameter WallData.CollectiveHousing.RT2012_MTD.Door Porte, redeclare parameter WallData.CollectiveHousing.IntDoor PorteInt, redeclare parameter WallData.CollectiveHousing.RT2012_MTD.ExtWall MurExt, redeclare parameter WallData.CollectiveHousing.PartitionWall Cloisons, redeclare parameter WallData.CollectiveHousing.SupportingWall Refends, redeclare parameter WallData.CollectiveHousing.RT2012_MTD.LandingWall MurPalier, redeclare parameter WallData.CollectiveHousing.RT2012_MTD.ExtWall MurCage, redeclare parameter WallData.CollectiveHousing.RT2012_MTD.Ceiling ParoiSousCombles, redeclare parameter WallData.CollectiveHousing.RT2012_MTD.Floor PlancherBas, redeclare parameter WallData.CollectiveHousing.CommonWall MurMitoyen, PontsTh_Generique = 0.00, PontsTh_Bas = 0.00, PontsTh_Haut = 0.00, TauxRenouvAir = 0.3, Hsext = 25, Hsint = 7.69, HsParoiSousCombles = 10);

Revisions

Benoît Charrier 06/2017 :

• editing value of air renewal renouvAir from 0,426 to 0,3 vol/h to fit with a humidity sensitive ventilation system which is commonly used in RT2012
• editing value of U glazings UvitrageAF and UvitrageSF from 1,2 to 1,5 W/m2.K which is more representative of RT2012
• setting thermal bridge values to null because actual values are not representative, will need to be adjusted when more data is available