.BuildSysPro.BuildingStock.Utilities.Records.BuildingData.CollectiveHousing.BuildingDataMATISSE.Matisse2012_STD

Information

Record of Matisse collective housing settings according to the date of construction

Hypothesis and equations

none

Bibliography

none

Instructions for use

Detail of thermal bridge vectors :

• TauPonts[1] and ValeursK[1] : exterior wall / common wall
• TauPonts[2] and ValeursK[2] : unheated room wall / common wall
• TauPonts[3] and ValeursK[3] : exterior wall / intermediate floor
• TauPonts[4] and ValeursK[4] : exterior wall / intermediate ceiling
• TauPonts[5] and ValeursK[5] : unheated room wall / intermediate floor
• TauPonts[6] and ValeursK[6] : unheated room wall / intermediate ceiling
• TauPonts[7] and ValeursK[7] : door
• TauPonts[8] and ValeursK[8] : windows

• TauPontsPlancher[1] and ValeursKPlancher[1] : intermediate floor / exterior wall of basement
• TauPontsPlancher[2] and ValeursKPlancher[2] : intermediate floor / unheated room wall of basement
• TauPontsPlancher[3] and ValeursKPlancher[3] : intermediate floor / common wall of basement

• TauPontsPlafond[1] and ValeursKPlafond[1] : intermediate ceiling / exterior wall of ceiling
• TauPontsPlafond[2] and ValeursKPlafond[2] : intermediate ceiling / unheated room wall of ceiling
• TauPontsPlafond[3] and ValeursKPlafond[3] : intermediate ceiling / common wall of ceiling

Known limits / Use precautions

Warning : thermal bridges have been set to null because of a lack of data, it will be necessary to complete them when more details are available.

Validations

Validated model - Benoît Charrier 12/2015

--------------------------------------------------------------
Licensed by EDF under a 3-clause BSD-license
Copyright © EDF 2009 - 2023
BuildSysPro version 3.6.0
Author : Benoît CHARRIER, EDF (2015)
--------------------------------------------------------------

Definition

record Matisse2012_STD = BuildSysPro.BuildingStock.Utilities.Records.BuildingData.CollectiveHousing.BuildingDataMATISSE.BuildingType(UvitrageAF = 1.5, UvitrageSF = 1.5, redeclare replaceable parameter WallData.CollectiveHousing.IntermediateFloor PlafondMitoyen, redeclare replaceable parameter WallData.CollectiveHousing.RT2012_STD.Door Porte, redeclare parameter WallData.CollectiveHousing.IntDoor PorteInt, redeclare replaceable parameter WallData.CollectiveHousing.IntermediateFloor PlancherMitoyen, redeclare replaceable parameter WallData.CollectiveHousing.RT2012_STD.ExtWall MurExt, redeclare replaceable parameter WallData.CollectiveHousing.RT2012_STD.LandingWall MurPalier, redeclare replaceable parameter WallData.CollectiveHousing.RT2012_STD.Ceiling PlafondImmeuble, redeclare replaceable parameter WallData.CollectiveHousing.RT2012_STD.Floor PlancherImmeuble, redeclare replaceable parameter WallData.CollectiveHousing.CommonWall MurMitoyen, redeclare replaceable parameter WallData.CollectiveHousing.PartitionWall Cloisons, bLNC = 0.1, bPlancher = 0.80, bPlafond = 1, ValeursK = {0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00}, TauPonts = {1, 1, 1, 1, 1, 1, 1, 1}, ValeursKPlafond = {0.00, 0.00, 0.00}, ValeursKPlancher = {0.00, 0.00, 0.00}, TauPontsPlafond = {1, 1, 1}, TauPontsPlancher = {1, 1, 1}, PontsTh_Generique = 0.00, PontsTh_Bas = 0.00, PontsTh_Haut = 0.00, renouvAir = 0.3, hsExtVert = 25, hsIntVert = 7.69, hsExtHor = 25, hsIntHorHaut = 10);

Revisions

Benoît Charrier 05/2015 : ajout de paramètres nécessaires au modèle MatisseAssemblageLC

Benoît Charrier 06/2017 :

• editing value of air renewal renouvAir from 0,426 to 0,3 vol/h to fit with a humidity sensitive ventilation system which is commonly used in RT2012
• editing value of U glazings UvitrageAF and UvitrageSF from 1,2 to 1,5 W/m2.K which is more representative of RT2012
• setting thermal bridge values to null because actual values are not representative, will need to be adjusted when more data is available