.BuildSysPro.IBPSA.Fluid.FMI.Validation.HeaterFan_noReverseFlow

Information

This example demonstrates how to configure a model with a heater and a fan that causes a pressure rise in the air stream. The model is identical with IBPSA.Fluid.FMI.Validation.HeaterFan except that reverse flow is not allowed due to the parameter allowFlowReversal=false. Consequently, the connectors for the fluid properties for the reverse flow are removed, and the blocks on the right hand side of the model IBPSA.Fluid.FMI.Validation.HeaterFan have been deleted.

Contents

Name	Description
Medium	Medium model

Revisions

• January 22, 2016, by Michael Wetter:
  Corrected type declaration of pressure difference. This is for #404.
• November 8, 2014, by Michael Wetter:
  First implementation.