.BuildSysPro.IBPSA.Fluid.FixedResistances.Validation.PlugFlowPipes.Data

Information

Subpackage that contains measurement data from various experiments at ULg and AIT. This data is used to validate BaseClasses.PipeCore.

References

van der Heijde, B., Fuchs, M., Ribas Tugores, C., Schweiger, G., Sartor, K., Basciotti, D., Müller, D., Nytsch-Geusen, C., Wetter, M. and Helsen, L. (2017). Dynamic equation-based thermo-hydraulic pipe model for district heating and cooling systems. Energy Conversion and Management, 151 (November), 158-169. https://doi.org/10.1016/j.enconman.2017.08.072

Contents

Name	Description
TestData	Example to check pipe data records
PipeDataAIT151218	Experimental data from AIT monitoring data December 18, 2015
PipeDataULg150801	Experimental data from ULg's pipe test bench from August 1
PipeDataULg151202	Experimental data from ULg's pipe test bench from December 2, 2015
PipeDataULg151204_1	Experimental data from ULg's pipe test bench from December 4, 2015 (1); increase followed by a decrease in temperature
PipeDataULg151204_2	Experimental data from ULg's pipe test bench from December 4, 2015 (2)
PipeDataULg151204_4	Experimental data from ULg's pipe test bench from December 4, 2015 (4); an increase followed by a decrease temperature
PipeDataULg160104_2	Experimental data from ULg's pipe test bench from 4 January 2016. Low mass flow
PipeDataULg160118_1	Experimental data from ULg's pipe test bench from January 18, 2016
BaseClasses	BaseClasses for data records